Todos los equipos.
Tunnel Microwave Belt Dryer / Curing Line
SED-350SDW-A microwave belt drying / curing line.
La descripción completa del modelo sigue en inglés
- Microwave irradiation efficiency 5% higher than domestic peers
- Excellent irradiation uniformity — minimises hot spots and product damage
- Oil-immersion closed-loop power supply: dust-proof, waterproof, 20% more energy-efficient than traditional transformers
Tunnel Microwave Belt Drying Machine
SED-500SDW-A tunnel-type microwave belt drying machine.
La descripción completa del modelo sigue en inglés
- Drying time only 3–4 minutes vs. hours with conventional equipment
- Simultaneous drying, sterilisation, insect-killing and mould prevention in one pass
- Preserves nutrients and colour; extends shelf life
Secador túnel por microondas
SED-800SDW-A tunnel microwave dryer, rated power approx.
La descripción completa del modelo sigue en inglés
- 920 kW large-capacity continuous tunnel microwave drying
- Toshiba magnetrons + oil-immersed power supply — long service life and high reliability
- Microwave irradiation efficiency ~5% higher than domestic peers, better uniformity
SED-150SDWJ-A Tunnel Microwave Thawing Equipment
SED-150SDWJ-A tunnel microwave thawing equipment.
La descripción completa del modelo sigue en inglés
- Designed for industrial frozen meat/seafood thawing — replaces hours of cold-water thaw
- Unmanned 24/7 operation reduces labour
- Comprehensive safety: door interlock, sparks/smoke detection, video monitoring
Box-type Microwave Vacuum Dryer
SED-1WB-B Box-type Microwave Vacuum Dryer for heat-sensitive materials (e.g.
La descripción completa del modelo sigue en inglés
- Rapid heating: material generates heat from within — no thermal conduction lag
- Uniform heating: electromagnetic waves penetrate inside and outside simultaneously — no outer burn / inner raw
- Energy efficient: saves over 1/3 energy vs. infrared heating
Dryer - Microwave Dryer
SED-1WB-D Box-type Microwave Vacuum Dryer — an upgraded model in the SED-1WB series.
La descripción completa del modelo sigue en inglés
- Energy-efficient: >4× improvement over conventional drying
- Uniform heating: material heated inside and out simultaneously
- Easy control: stepless microwave power adjustment; PLC+HMI programmable
Dryer - Microwave Dryer
SED-1WB-C Box-type Microwave Vacuum Dryer for food, pharma, biotech, chemical, material engineering, and agricultural deep-processing applications.
La descripción completa del modelo sigue en inglés
- Energy-efficient: >4× efficiency improvement over conventional drying
- Uniform heating: material heated inside and out simultaneously
- Easy control: stepless microwave power adjustment; PLC+HMI programmable
Horno de secado de microondas
Horno de secado SED-5WB-K Microondas. Combina la calefacción por microondas con tecnología de vacío, ideal para materiales termosensibles. Vs secado convencional: bajo consumo de energía, tiempo de secado corto, baja temperatura de trabajo, mejor color de producto, mayor retención de vitaminas. Se utiliza para secado de baja temperatura / esterilización / concentración de termosensible, prono oxidación, alta viscosidad, materiales líquidos de alta concentración en medicina, química, alimentos, productos biológicos y agrícolas — extractos de TCM, ginseng, gelatina de asno-hido, hortalizas, flores, productos bioquímicos, productos de salud, aditivos, etc.
- Hasta 4x más rápido que el secado convencional
- Conserva color, nutrición, vitaminas de materiales sensibles al calor
- Limpia y ecológicamente segura — no hay tres desechos, ningún peligro radiactivo
Cabinet Microwave Vacuum Dryer
SED-3.6WB-K cabinet microwave vacuum dryer.
La descripción completa del modelo sigue en inglés
- Microwave + vacuum dual action: low-temperature rapid drying, ideal for heat-sensitive materials
- Stepless adjustment of microwave power and vacuum level — highly flexible process control
- Fully automated control: enter process parameters via HMI, system auto-calculates microwave power and drying time
Box-Type Microwave Vacuum Dryer
SED-18WB-C is a box-type microwave vacuum dryer combining microwave energy with vacuum technology for low-temperature dehydration, drying, and sterilization of…
La descripción completa del modelo sigue en inglés
- Drying time only 45–70 minutes; energy cost ~8–10× lower than steam vacuum drying
- Drying temperature 45–60°C freely adjustable; 0% material loss
- Lower active-ingredient loss than competing equipment
SED-24WB-C 24kW Box-Type Microwave Vacuum Dryer
SED-24WB-C box-type microwave vacuum dryer with 24 kW microwave power and a 7.5 kW vacuum pump (total installed ~32 kW).
La descripción completa del modelo sigue en inglés
- Drying speed 4× faster than conventional vacuum drying
- Uniform inside-out heating eliminates inner/outer temperature gradient
- Low-temperature operation preserves activity, vitamins, color, and nutrients
Box-Type Microwave Vacuum Drying & Sterilization Machine
SED-30WB-B Box-type Microwave Vacuum Drying & Sterilization Machine.
La descripción completa del modelo sigue en inglés
- Microwave drying replaces traditional vacuum drying for heat-sensitive materials with no degradation
- Built-in sterilization at lower temperature preserves activity, vitamins, color, nutrients
- Saves energy by ≥1/3 vs infrared heating; only conduction loss vs the load itself
Microwave Vacuum Drying Machine
SED-30WB-K Microwave Vacuum Drying Machine.
La descripción completa del modelo sigue en inglés
- Hybrid technology — vacuum + microwave — solves heat-transfer bottleneck of pure vacuum drying
- Designed to EU safety standards (CE-ready electrical design)
- Customizable microwave power and chamber size
Microwave Vacuum Drying Machine
SED-36WB-K Microwave Vacuum Drying Machine for low-temperature fast drying of medicinal extracts, Chinese herbal medicines, Western/Chinese pharmaceuticals, he…
La descripción completa del modelo sigue en inglés
- Microwave frequency 2450±15 MHz, output 30 kW
- 30 × 1.05 kW water-cooled industrial magnetrons (24/7-rated)
- Integrated power modules with stepless online power adjustment
Microwave Vacuum Dryer
SED-60WB-K microwave vacuum dryer for low-temperature rapid drying of TCM extracts, Chinese medicinal herbs, pharmaceuticals, health products, and heat-sensiti…
La descripción completa del modelo sigue en inglés
- Microwave output 60 kW (continuously controllable)
- Dewatering capacity 48–60 kg/h
- Total installed power <80 kVA
SED-75WB-A Vacuum Microwave Drying Equipment
SED-75WB-A Vacuum Microwave Drying Equipment with total power 105kW (75 microwave units).
La descripción completa del modelo sigue en inglés
- Compliant with GB10436-89 microwave leakage standard
- Compliant with GB5226 electrical safety standard
- Low-temperature vacuum drying protects materials
SED-100WB-A
SED-100WB-A Microwave Vacuum Dryer (tank internal 6150×Ø1800 mm, outer 6500×2800×2500 mm).
La descripción completa del modelo sigue en inglés
- Complies with GB10436-89 (≤5 mW/cm²) and GB5226 electrical safety standards
- Low-temperature vacuum environment protects heat-sensitive materials
- Oil-immersed sealed power supply — long life, low energy consumption
SED-3FZG-I Non-Standard 3-Tray Square Static Vacuum Dryer
SED-3FZG-I is a non-standard custom 3-tray square static vacuum dryer for low-temperature drying of heat-sensitive materials that decompose, polymerize, or det…
La descripción completa del modelo sigue en inglés
- Non-standard 3-tray size suits niche pharma R&D and pilot batches without paying for a full standard cabinet
- Mirror-polished, rounded-corner interior with sanitary shelf frame is GMP-compliant
- Thermal-oil shelf heating gives uniform temperature with minimal top-to-bottom delta
Square
SED-5FZG-H static vacuum dryer (GMP certified).
La descripción completa del modelo sigue en inglés
- GMP certified
- Arch-top design eliminates condensate fallout — higher drying efficiency at low temperature
- Synchronous shutoff of pump and check valve prevents back-suction of pump water/oil
SED-8FZG1-A Series Square Vacuum Dryer
SED-8FZG1-A Series Square Vacuum Dryer.
La descripción completa del modelo sigue en inglés
- 21 CFR Part 11-compliant electronic signature
- Sealed enclosure suitable for toxic / irritant solvent vapors
- GMP-friendly with pre-drying steam sterilization port
SED-8FZG-A Series
SED-8FZG-A Series Square Vacuum Drying Machine.
La descripción completa del modelo sigue en inglés
- Gentle, low-temperature drying for heat-sensitive APIs and intermediates
- Solvent recovery via optional condenser
- GMP-compliant static drying (no cross-contamination)
SED-8FZG-H Static Vacuum Dryer
SED-8FZG-H Static Vacuum Dryer (Reach GMP Certification).
La descripción completa del modelo sigue en inglés
- Reach GMP certification
- Solvent recovery via optional condenser
- Mirror-finish SUS 304 chamber (6mm inner wall, 1.2mm outer seal plate)
SED-8FZG-I Square Vacuum Dryer
SED-8FZG-I Square Vacuum Dryer.
La descripción completa del modelo sigue en inglés
- Compliant with 2010-edition Chinese GMP
- Mushroom seal for hygienic vacuum sealing
- Sealed enclosure suitable for toxic/irritant solvent vapors
Static Square Vacuum Dryer
SED-10FZG-H Static Vacuum Dryer (Reach GMP).
La descripción completa del modelo sigue en inglés
- GMP
- 、
- + ，
Dryer - Vacuum Dryer - SED-FZG Square Vacuum Dryer
SED-10FZG-R Large Square Vacuum Dryer.
La descripción completa del modelo sigue en inglés
- 360 kg/batch ultra-large capacity (3× typical FZG models)
- Three-layer reinforced chamber structure — reliable under pressure
- Complete system: SED-ZKB-R vacuum pump + vapour-liquid separator + liquid tank
Square Vacuum Drying Oven
SED-6FZG-C Square Vacuum Drying Oven leverages the principle that water boils at lower temperature under reduced pressure to achieve fast, low-temperature dryi…
La descripción completa del modelo sigue en inglés
- Suitable for heat-sensitive materials (pharmaceutical, food, and chemical raw materials)
- GMP-validated standard — easy to disassemble and clean
- Water-ring vacuum pump is safer and more eco-friendly than rotary-vane pumps
SED-FZG Square Vacuum Dryer
SED-12FZG1-A square vacuum dryer: 12 layers x 12 trays = 144 trays per batch (460 x 640 x 45 mm).
La descripción completa del modelo sigue en inglés
- Largest tray count in the SED-FZG family (144 trays)
- Hot-water heating allows fine and stable temperature control
- Solvent-recovery loop standard (condenser + separator + buffer tank)
Square Vacuum Dryer
SED-12FZG-A series square vacuum dryer with 12-layer round-tube heater rack, 48 trays (640 x 460 x 45 mm).
La descripción completa del modelo sigue en inglés
- Lowers boiling point under vacuum, smaller heat-transfer area needed
- Low heat loss; can use low-pressure or surplus steam as heat source
- Pre-drying disinfection possible; no impurity ingress during cycle - GMP compliant
Square Vacuum Dryer
SED-12FZG-T square vacuum dryer with hot-water heating: 2 racks x 12 layers, 96 trays (640 x 460 x 45 mm).
La descripción completa del modelo sigue en inglés
- Large 96-tray capacity, two-rack loading
- Hot-water heating - no boiler steam needed in-house
- Tight +/-1.5 degC temperature control with PLC controller
SED-FZG Square Vacuum Dryer
SED-12FZG2-A square vacuum dryer: SUS304 chamber with 72 trays (460 x 640 x 45 mm).
La descripción completa del modelo sigue en inglés
- Lower boiling point under vacuum reduces required heat-transfer area
- Low heat loss
- Compatible with surplus or waste steam
Square Vacuum Dryer
SED-48FZG-A square vacuum dryer.
La descripción completa del modelo sigue en inglés
- Drying chamber internal: 1500×1200×1740 mm
- Overall dimensions: 1660×1280×2150 mm
- 48 trays (460×640×45 mm each)
Square Cabinet Vacuum Dryer
SED-25FZG-T is a square cabinet-style vacuum dryer designed for low-temperature drying of heat-sensitive materials.
La descripción completa del modelo sigue en inglés
- Suitable for heat-sensitive materials (low temperature, vacuum)
- Hot-water tube heating - dry heat surface, no water on materials
- Energy-efficient hot-water recirculation
Doble cono de vacuo rotativo
SED-100HZG-T Doble Cono Secador de Vacío Rotario para polvos de secado, gránulos y materiales cristalinos en industrias farmacéuticas, químicas, alimentos, tintes y metodología de polvo. Cuerpo cilíndrico con extremos cónicos; tapas de cono sirven como entrada/outlet material y agujeros de manguera. Nave de tres capas: forro interior (SUS304), chaqueta de calefacción (stéam ≤0.5 MPa agua caliente o aceite térmico), y aislamiento de madera de vidrio ultrafino. Material se agita bajo vacío (–0.095 MPa) mientras se gana calor a través de la pared del vaso. Tiempo de secado ~2/3 de un horno de vacío estático. Capacidad de contenedores 100 L; volumen de trabajo ≤50 L.
- Tiempo de secado sólo ~2/3 de un horno de vacío estático para el mismo material
- Evita el amarillento superficial y protege materiales sensibles al calor / oxidación-prono
- Conserva la estructura de cristal y limita la contaminación de los metales
Double-Cone Rotary Vacuum Dryer
SED-500HZG-T Double-Cone Rotary Vacuum Dryer.
La descripción completa del modelo sigue en inglés
- Low-temperature vacuum drying -- protects heat-sensitive product
- Drying time ~2/3 vs vacuum oven
- GMP compliant
SED-HZG Double-Cone Rotary Vacuum Dryer
SED-1000HZG-T Double-Cone Rotary Vacuum Dryer, 1000 L total vessel (working volume ≤500 L).
La descripción completa del modelo sigue en inglés
- Low-temperature drying preserves heat-sensitive APIs
- Achieves <0.05% residual moisture
- Closed system — no contamination, dust, or solvent emissions
SED-HZG
SED-2000HZG-Y Double Cone Rotary Vacuum Dryer (variant Y, low-jacket-pressure design).
La descripción completa del modelo sigue en inglés
- Vessel rotation ensures continuous material tumbling — high heat transfer coefficient
- Fast, uniform, complete drying
- Energy-saving design
Double-Cone Rotary Vacuum Dryer
SED-50HZG-T Double-Cone Rotary Vacuum Dryer (50 L).
La descripción completa del modelo sigue en inglés
- Especially suited to oxidation-sensitive and heat-sensitive materials
- Preserves crystalline form during drying
- Strict metal-ion limit applications (enameled inner shell)
SED-RZG Rotary Mixing Vacuum Dryer
SED-RZG series rotary mixing vacuum dryer.
La descripción completa del modelo sigue en inglés
- Indirect (jacket) heating — no contamination of material
- Vacuum + rotation provides 2x faster drying than ordinary ovens
- Final moisture <0.5%; drying time 2-4 h
SED-4YZG-T Non-Standard Circular Vacuum Dryer
Non-standard circular vacuum dryer with through-flow drying design.
La descripción completa del modelo sigue en inglés
- Solves temperature unevenness problem of static vacuum dryers via double-tube interleaved heating
- Low-temperature rapid drying preserves heat-sensitive materials
- Floating bearing-hinged door for easy opening and high vacuum integrity
Secador de vacío – Secado de vacío – Secado de vacío
Secador de vacío SED-2000BZJ-T Compuesto de cáscara, eje rotatorio, dientes de harrow y sistema de descarga de humedad. El material húmedo se carga en el secador; medio de calefacción (al vapor, aceite térmico o agua caliente) se alimenta en la chaqueta; el agitador corre hacia adelante y hacia atrás para que los dientes de harrow empujan continuamente el material hacia el medio y ambos extremos, refrescando la superficie de transferencia de calor y acelerando la transferencia de masa de calor. Volumen total 2000 L. Carga máxima 1200 L (fill ratio 0.5–0.6). Cilindro interior Ø1100×2000 mm Presión de la chaqueta 0.3 MPa presión de cilindro −0.08 a +0.15 MPa Velocidad de los dientes de la flecha 6–20 rpm Potencia de conducción 11 kW Temperatura de secado ≤30 °C (calor de agua caliente). Potencia total 36 kW incluyendo auxiliares. Eficiencia de calor 70–80%. 14.6
- Sistema completo: 36 kW total (11 kW drive + 9 kW calentador de agua + 7.5 kWbomba de vacío + 0.75 kW bomba de circulación)
- Secado de baja temperatura ≤30 °C con calefacción de agua caliente para materiales sensibles al calor
- Secado uniforme de la goma / pasta / pasta / pasta
Rake-Type Vacuum Dryer
SED-500BZJ-T Rake-Type Vacuum Dryer.
La descripción completa del modelo sigue en inglés
- Dual action — vacuum plus jacket heating — accelerates drying
- Rake forward/reverse switching ensures uniform mixing and prevents local overheating
- Achieves low-moisture final product
Dryer - Vacuum Rake Dryer
10,000-liter vacuum rake dryer (paddle / rake style).
La descripción completa del modelo sigue en inglés
- Vacuum operation enables low-temperature drying of heat-sensitive materials and allows organic-vapor recovery
- Continuous bidirectional raking (left + right teeth at 90° offset) prevents wall caking and refreshes heat-transfer surface (heat efficiency 70–80%)
- Jacket + internal coil dual-heating maximizes heat-transfer area
Vacuum Rake Dryer
SED-6000BZJ-T Vacuum Rake Dryer is an indirect-heating vacuum dryer using thermal-oil jacket plus thermal-oil-fed hollow rake teeth.
La descripción completa del modelo sigue en inglés
- Indirect heating + high vacuum protect heat-sensitive and easily oxidized actives
- Hollow rake teeth = additional heat-transfer surface, faster drying
- Closed system with vacuum-assisted solvent recovery
Vertical Single-Cone Vacuum Spiral-Ribbon Dryer 120 L total 100 L working
SED-100DLZG-A vertical single-cone vacuum spiral-ribbon dryer.
La descripción completa del modelo sigue en inglés
- 3 to 5x drying efficiency of equivalent double-cone rotary vacuum dryer
- Sealed system safe for flammable, toxic, sterile and contamination-sensitive materials
- Loading coefficient up to 90% on suitable materials
Single-Cone Helical-Ribbon Vacuum Dryer / Mixer
SED-500DLZG-S Single-Cone Helical-Ribbon Vacuum Dryer / Mixer.
La descripción completa del modelo sigue en inglés
- 1–2× drying efficiency of a comparable double-cone vacuum dryer
- Single machine replaces two pieces (drying + mixing)
- Fully sealed N₂ operation — no cross-contamination, suitable for heat-sensitive APIs
Mezclador de BW (W-Shape / Mezclador de doble cono)
SED-300BWH-B es una mezcladora de 300 L BW (W-shape / doble-cone) diseñada para mezclar materiales secos y gránulos en industrias farmacéuticas y de otro tipo. Su estructura única de cilindro ofrece alta potencia de mezcla sin esquinas muertas para mezclar uniforme. Un apego opcional de agitación forzada (bar de intensificación) permite mezclar polvos finos, polvos postagglomeración, mezclas de polvo multicomponentes y polvos con algún contenido de humedad. Eficaz para lotes de traza-additivos.
- Volumen total 300 L, volumen de trabajo 180 L
- Capacidad 60 kg/batch
- Tiempo de mezcla de 6 a 10 minutos 6–10 min
Mixer - V-Type Mixer
SED-4000VH-A V-type blender with unique V-cylinder geometry — no dead corners; SUS304 inner/outer wall mirror-polished surface meets GMP.
La descripción completa del modelo sigue en inglés
- V-geometry convective blending with no dead corners for excellent mixing uniformity
- Inner/outer mirror-polished SUS304 meets pharmaceutical hygiene grade
- ABB motor + KEWO frequency inverter + Schneider electrical controls
Mixer - V-Type Mixer
SED-4000VH-B high-efficiency V-type blender for dry powders/granules in food, pharmaceutical, and general industries.
La descripción completa del modelo sigue en inglés
- V-geometry convective blending with no dead corners
- Optional forced agitator for difficult-to-mix and trace-additive materials
- High blending efficiency with uniform mixing