SED-5FZG-H — Square
La descripción completa de este modelo aún se está traduciendo. Consulte los detalles en inglés o solicite información a nuestro equipo. English
SED-5FZG-H static vacuum dryer (GMP certified). Batch static vacuum drying chamber for heat-sensitive, easily-oxidised raw materials. Internal chamber 1500×1060×1220 mm, external 1924×1720×1513 mm. 5 baking shelves, 20 t
Funcionamiento
Batch static vacuum drying. Material is loaded onto trays placed on the heated baking rack inside a sealed chamber. The chamber is evacuated by a 5.5 kW SKA-5111 water-ring vacuum pump (with DDC-JQ50 electromagnetic check valve) to lower the boiling point of moisture/solvent so heat-sensitive materials evaporate at low temperature. A steam coil at the top of the chamber equalises heating and prevents upper/lower temperature gradient. Shanghai Yatai XMTD-3000 temperature controller with digital PID maintains set-point. Synchronised shutoff of pump and check valve prevents back-suction of pump water/oil. Optional condenser recovers solvent.
Especificaciones técnicas
Especificaciones
Dimensiones
Materiales
Características principales
Aplicaciones
Sectores
Marcas de componentes
Conformidad
Limpieza y mantenimiento
After use, clean box body and rack joint fouling areas with water. Pull out drying rack via rack handle for interior access. Regularly inspect vacuum gauge Y-100, temperature gauge, and XMTD-3000 controller; replace promptly if damaged. Door seal life approximately 3–5 years; replace immediately if steam leakage occurs. Before any electrical maintenance, disconnect external and panel power.