Accueil / Équipements / Sécheur sous vide à plateaux carrés (FZG / FZG1 / FZG2) / Static Vacuum Dryer — Square (GMP Certified)

SED-5FZG-H

Sur devis

SED-5FZG-H

SED · SED-5FZG-H · En vedette

SED-5FZG-H — Square

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-5FZG-H static vacuum dryer (GMP certified). Batch static vacuum drying chamber for heat-sensitive, easily-oxidised raw materials. Internal chamber 1500×1060×1220 mm, external 1924×1720×1513 mm. 5 baking shelves, 20 t

GMP

Choisir une variante (1)

Délai de livraison

Sur devis

Cadence

50–80 kg

Fonctionnement

Batch static vacuum drying. Material is loaded onto trays placed on the heated baking rack inside a sealed chamber. The chamber is evacuated by a 5.5 kW SKA-5111 water-ring vacuum pump (with DDC-JQ50 electromagnetic check valve) to lower the boiling point of moisture/solvent so heat-sensitive materials evaporate at low temperature. A steam coil at the top of the chamber equalises heating and prevents upper/lower temperature gradient. Shanghai Yatai XMTD-3000 temperature controller with digital PID maintains set-point. Synchronised shutoff of pump and check valve prevents back-suction of pump water/oil. Optional condenser recovers solvent.

Processus de fonctionnement

1Batch static vacuum drying.

2Material is loaded onto trays placed on the heated baking rack inside a sealed chamber.

3The chamber is evacuated by a 5.5 kW SKA-5111 water-ring vacuum pump (with DDC-JQ50 electromagnetic check valve) to lower the boiling point of moisture/solvent so heat-sensitive materials evaporate at low temperature.

4A steam coil at the top of the chamber equalises heating and prevents upper/lower temperature gradient.

5Shanghai Yatai XMTD-3000 temperature controller with digital PID maintains set-point.

6Synchronised shutoff of pump and check valve prevents back-suction of pump water/oil.

7Optional condenser recovers solvent.

Caractéristiques techniques

Caractéristiques de la variante : SED-5FZG-H SED-5FZG-H

Caractéristiques

Modèle

SED-5FZG-H

Cadence

50–80 kg

Fluides et énergie

Steam (low-pressure or waste) or electric/hot-water/thermal-oil heating supply; vacuum pump 5.5 kW power; cooling water for water-ring vacuum pump; compressed air for valves

Puissance

5.5 kW

Pression d’air

Vacuum; baking-shelf internal pipe pressure ≤0.784 MPa

Dimensions

Longueur

1924 mm

Largeur

1720 mm

Hauteur

1513 mm

Poids

1400 kg

Matériaux

Matériaux en contact

SUS304 6 mm mirror panel (chamber inner wall); SUS304 (drying rack: main rail φ45 mm, layers φ32 mm, branches φ22 mm); SUS304 (trays, valves, pipework); edible silicone rubber (door seal)

Matériaux du bâti

SUS304 1.2 mm (outer skin); SUS304 6 mm (inner panel); A3 8# steel (external reinforcement); aluminum-silicate fiber cotton insulation (20 m²)

Caractéristiques principales

Internal chamber 1500×1060×1220 mm; external 1924×1720×1513 mm

5 baking shelves, 20 trays (460×640×45 mm), 50 kg capacity

Operating temperature ≤150 °C

Shelf-pipe permitted pressure ≤0.784 MPa

Arch-roof design prevents condensate dripping onto trays

Top-of-box steam coil eliminates upper/lower temperature gradient

Pull-out drying rack for easy interior cleaning

Two 100 mm sight glasses on door

Box wall: 6 mm SUS304 mirror panel + 8# steel reinforcement + aluminum-silicate insulation + 1.2 mm SUS304 outer skin

Vacuum system: SKA-5111 5.5 kW water-ring pump, DDC-JQ50 electromagnetic check valve, Y-100 vacuum gauge, water-vapour separator

Independent electrical control box: auto temp/vac control, PID self-tuning, over-temperature alarm

Edible silicone rubber door seal

GMP certified

Arch-top design eliminates condensate fallout — higher drying efficiency at low temperature

Synchronous shutoff of pump and check valve prevents back-suction of pump water/oil

Compatible with steam, waste steam, electric, hot-water and thermal-oil heating

Solvent recovery available via external condenser

Stamped no-dead-corner trays for easy cleaning

PID self-tuning control with strong anti-interference

12-month warranty from commissioning

Applications

Drying of heat-sensitive APIs and intermediates

Drying of easily-oxidised materials

Solvent recovery drying

Low-temperature drying of pharmaceutical, food, electronic and chemical products

Secteurs

Pharmaceuticals

Chemicals

Food

Electronics

Marques des composants

Outer skin SUS304

1.2 mm sheet

Inner panel SUS304

6 mm sheet

External strengthening steel

A3 8# channel

Door seal

Edible silicone rubber

Temperature controller

Shanghai Yatai XMTD-3000

Temperature resistor

PT100 K-type

Vacuum gauge

Y-100

Vacuum pump

SKA-5111 water-ring 5.5 kW

Electromagnetic vacuum check valve

DDC-JQ50

Low-voltage electrical apparatus

Huadong

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

GMP

Nettoyage et entretien

After use, clean box body and rack joint fouling areas with water. Pull out drying rack via rack handle for interior access. Regularly inspect vacuum gauge Y-100, temperature gauge, and XMTD-3000 controller; replace promptly if damaged. Door seal life approximately 3–5 years; replace immediately if steam leakage occurs. Before any electrical maintenance, disconnect external and panel power.