Todos los equipos.
Water-Bath Sterilisation Cabinet
SED-0.25SM-J is a 0.25 m³ horizontal water-bath (water-shower) sterilisation cabinet with gas-seal double-leaf motorised doors.
La descripción completa del modelo sigue en inglés
- Capacidad: 80 minutes/cycle
600 L, Double-Door Pass-Through
SED-0.6SM-A Super Water (Superheated Water-Bath) Sterilizer (600 L) — double-door pass-through, motorized doors.
La descripción completa del modelo sigue en inglés
- Dedicated to pharma liquids in glass/plastic bottles/soft bags/ampoules — counter-pressure tracking minimizes broken-bag rate
- All-imported core components: GEMU Germany valves, SSC USA nozzles, STERLING Germany vacuum pump, Spirax Sarco UK steam traps, JUMO Germany Pt100, DANFOSS Denmark transmitter
- BAODE 316L plate exchanger with interchangeable plates — easy maintenance
0.6 m³, Motorized Double-Door
SED-0.6SM-J Water-Bath Sterilizer (Superheated Water / Spray type).
La descripción completa del modelo sigue en inglés
- Vendor includes free commissioning, training, AND on-site GMP validation with Danish Ellab equipment — major value-add
- Superheated water spray with Sparying USA nozzles — gentle on glass/plastic packaging
- WILO Germany circulating pump — superior reliability and seal life
Water-Bath Sterilization Cabinet
SED-1.2SM-J is a horizontal water-bath (water-spray) sterilization cabinet with gas-sealed, double-leaf motorized doors.
La descripción completa del modelo sigue en inglés
- Counter-pressure water-spray method ideal for terminal sterilization of liquid drugs in IV bottles, ampoules and soft IV bags without container rupture
- Premium components: Siemens S7 PLC (50,000 hr MTBF), WILO pump, ASCO valves, HUBA pressure transmitter, B+B/Ereith Pt100 sensors
- GB/T150.1-4-2024 pressure-vessel compliant with X-ray weld inspection and full quality documentation
Water-Bath Sterilizer
SED-1.5SM-J is a horizontal water-bath / super-heated-water-cascade sterilizer with a 1820 × 750 × 1100 mm inner chamber, double-leaf motorized doors and pneum…
La descripción completa del modelo sigue en inglés
- Counter-pressure water spray for soft-bag and PET products that cannot tolerate steam pressure
- Wide working temperature 60–134 °C for both pasteurization and high-temperature terminal sterilization
- Plate heat exchanger enables rapid, energy-efficient heating and cooling with no direct steam contact on product
Water Bath Type Sterilization Cabinet
The SED-2.5SM-J is a horizontal, double-gate, motorized-door water-bath sterilization cabinet for the pharmaceutical industry.
La descripción completa del modelo sigue en inglés
- Premium imported components: Siemens S7-200 PLC, ASCO pneumatic valves, WILO circulating pump, Swiss HUBA pressure transmitter
- ASCO angle-seat pneumatic valves rated for 4 million operating cycles
- Siemens S7-200 PLC with MTBF up to 50,000 hours
Water-Bath Sterilizer
SED-3.0SM-J water-bath (water-shower) sterilizer with vacuum leak test.
La descripción completa del modelo sigue en inglés
- International brand core components (Siemens PLC, ASCO pneumatic valves, WILO pump, HUBA pressure transmitter) for long-term reliability
- GB150-2011 pressure vessel standard + X-ray inspection + labor-department quality certification for strong regulatory compliance
- Supports electronic signature + administrator privileges + multi-level password (GMP compliant)
Horizontal Water-Bath/Water-Spray Ampoule Leak-Test Sterilizer
SED-6.0SM-J horizontal water-spray (water-bath) ampoule leak-test sterilizer with airtight seal, double-door, motorized doors.
La descripción completa del modelo sigue en inglés
- No secondary contamination
- ASCO pneumatic valves rated 4 million cycles
- WILO circulating pump — maintenance-free, no leakage
13 m³ Double-Door Water-Shower Sterilizer
SED-13SM-Q 13 m³ Double Horizontal Sliding Door Water-Shower Sterilizer (Autoclave).
La descripción completa del modelo sigue en inglés
- 13 m³ chamber capacity — loads up to 1008 soft IV bags per cycle
- 316L cylindrical body CO2-welded — long service life vs. rectangular vessels
- Critical components imported (Danfoss pressure transmitter, JUMO Pt100 sensor, ASCO angle-seat valves, French circulation pump)
Armario de esterilización de baño de agua (Doble Door)
SED-23SM-A es un esterilizador de doble puerta (baja agua) para contenedores farmacéuticos inyectables y cargas líquidas similares. La cámara cilíndrica mide φ2,000 × 7,400 mm (D×L) — unos 23 m3 — con dimensiones globales 7,780 × 4,000 × 2,820 mm La construcción es todo acero inoxidable SUS304; el control es por Siemens PLC + HMI con monitor de computadora y funciones avanzadas de grabación, impresión y almacenamiento. Presión de diseño 0.245 MPa temperatura de diseño 139 °C presión de trabajo 0–0.22 MPa temperatura de trabajo máxima 134 °C uniformidad de equilibrio de calor ≤ 1 °C. Entregado con 6 carros de carga. ±1 °C
- Diseño paso a través de puerta doble (separación limpia/sucia)
- Estarilización de la ducha de agua-baja
- Cámara φ2000 × 7400 mm (~23 m3)
Water-Bath Sterilizer
SED-29SM-Q Water-Bath Sterilizer (29 m³ chamber) uses high-temperature circulating water as the sterilising medium with a shower-type sterilisation process.
La descripción completa del modelo sigue en inglés
- Capacity 29 m³ — up to 5,120 × 500 mL bags per cycle
- Class-1 pressure vessel with full X-ray weld inspection
- Premium imported components (Siemens PLC/HMI, ASCO valves, JUMO temperature sensors, Danfoss pressure transmitter, Spirax Sarco traps, BAODE plate heat exchanger, D-STRING pumps)