Inicio / Equipos / Armario de esterilización por baño de agua / Water-Bath (Water-Cascade) Sterilizer (SED-1.5SM-J)
SED-1.5SM-J
Consultar
SED-1.5SM-J
SED · SED-1.5SM-J · Destacado
SED-1.5SM-J — Water-Bath Sterilizer
La descripción completa de este modelo aún se está traduciendo. Consulte los detalles en inglés o solicite información a nuestro equipo. English
SED-1.5SM-J is a horizontal water-bath / super-heated-water-cascade sterilizer with a 1820 × 750 × 1100 mm inner chamber, double-leaf motorized doors and pneumatic sealing. High-temperature recirculating water is the ste
Elegir variante (1)
Plazo de entrega
Consultar
Capacidad de producción
Contáctenos
Funcionamiento
Cycle: automatic self-test of utilities → water fill to set level → internal spray recirculation (chamber bottom → circulating pump → plate heat exchanger water-side → top spray nozzles) → heat-up (steam through heat-exchanger steam-side) → sterilization hold (F₀ value and temperature-time dual monitoring) → cooling (cooling water through heat-exchanger steam-side) → drain (optional) → end. Counter-pressure (back-pressure) is maintained throughout to protect flexible and sealed containers from deformation.
Proceso de funcionamiento
1Cycle: automatic self-test of utilities → water fill to set level → internal spray recirculation (chamber bottom → circulating pump → plate heat exchanger water-side → top spray nozzles) → heat-up (steam through heat-exchanger steam-side) → sterilization hold (F₀ value and temperature-time dual monitoring) → cooling (cooling water through heat-exchanger steam-side) → drain (optional) → end.
2Counter-pressure (back-pressure) is maintained throughout to protect flexible and sealed containers from deformation.
Especificaciones técnicas
Especificaciones de la variante: Sub-0.8 m³ variants use sterilization sieve plate
Especificaciones
Modelo
SED-1.5SM-J
Tensión
AC380V three-phase 5-wire, 50Hz
Suministros
Drinking water: 0.1–0.3 MPa, ~1 000 kg/cycle. Pure water: 0.1–0.2 MPa. Boiler steam: 0.4–0.6 MPa, ~60 kg/cycle. Compressed air: 0.5–0.7 MPa for door seal, pneumatic valves and counter-pressure. Power: AC 380 V three-phase 5-wire 50 Hz, 4.5 kW.
Detalles de conformidad
Inner chamber and jacket 6 mm 304 SS welded with Q345R reinforcement plate. Class I pressure vessel built to GB150-2011 with X-ray inspection and labor-bureau quality documentation. Double-door interlock, pressure-safety interlock, and door-seal pressure interlock. F₀ value monitoring in addition to temperature-time dual control. Includes 13% VAT in quoted price.
Potencia
4.5 kW
Presión de aire
0.5-0.7 MPa compressed air
Dimensiones
Longitud
2100 mm
Anchura
1900 mm
Altura
2000 mm
Peso
1900 kg
Superficie de instalación
External 2100 (L) × 1900 (W) × 2000 (H) mm. Designed for double-door pass-through installation between non-sterile and sterile sides.
Materiales
Materiales en contacto
304 SS inner chamber (6 mm) reinforced with Q345R; 304 SS sanitary clamp piping; medical-grade silicone rubber door seal; 304 SS sterilization cars and trolleys.
Materiales del cuerpo
304 SS jacket (6 mm); 304 SS oil-grind outer cover (1.2 mm); 50 mm aluminum silicate insulation.
Características principales
Cascading super-heated water spray sterilization with counter-pressure (back-pressure) protection
Inner chamber 6 mm 304 SS welded; reinforced with Q345R container-grade plate; jacket 6 mm 304 SS
Double-leaf motorized doors with double-door interlock and pressure-safety interlock; door panel 304 SS
ASCO (USA) pneumatic angle-seat valves; Airtac (Taiwan) solenoid valves
Water-ring vacuum pump (Yulong): low noise, high vacuum
Germany WILO circulating water pump; Huisituo plate heat exchanger
Siemens S7-200 PLC; TRE (Taiwan) touchscreen HMI; Beijing Weihuang micro-printer (EPSON head)
Pt100 Class-A probes (Iris, ≤ 0.15 °C error); HUBA (Switzerland) pressure transmitter
Working temperature 60–134 °C; thermal uniformity ≤ ±1 °C; cycle 70–75 min
Beijing Brady pressure gauges; Zhejiang Guangyi safety valves; HUBA pressure transmitter
Counter-pressure water spray for soft-bag and PET products that cannot tolerate steam pressure
Wide working temperature 60–134 °C for both pasteurization and high-temperature terminal sterilization
Plate heat exchanger enables rapid, energy-efficient heating and cooling with no direct steam contact on product
Double-door pass-through isolates non-sterile and sterile areas
Class I pressure vessel (GB150-2011) with X-ray inspection
Aplicaciones
Sterilization of glass-bottle liquid pharmaceuticals
Sterilization of ampoule liquid pharmaceuticals
Sterilization of plastic-bottle and PET liquid products
Sterilization of plastic soft bags (LVP infusion bags)
Food and beverage canning sterilization
Sectores
Pharmaceutical manufacturing (LVP, SVP, ampoules)
Food and beverage canning
Hospital pharmacy / CSSD
Marcas de componentes
PLC: Siemens S7-200 (Germany)
Touch screen HMI: TRE (Taiwan)
Micro printer: Beijing Weihuang (EPSON head)
Pneumatic angle-seat valves: ASCO (USA)
Solenoid valves: Airtac (Taiwan)
Water-ring vacuum pump: Yulong
Circulating water pump: WILO (Germany)
Plate heat exchanger: Huisituo
Pressure gauge: Beijing Brady
Safety valve: Zhejiang Guangyi (0.1–0.3 MPa)
Pressure transmitter: HUBA (Switzerland)
Temperature probes: Iris (Pt100 Class A, ≤ 0.15 °C)
SED
Hable con SED Sales Team
Especialistas en equipos · contacto por WhatsApp
Consulte el horario y la disponibilidad del equipo
Conformidad
GMP-compliant design
GB150-2011 steel pressure vessel standard
Class I pressure vessel
X-ray flaw inspected with labor-bureau quality documentation
Limpieza y mantenimiento
Sanitary clamp piping in 304 SS allows tool-free disassembly for cleaning. Plate heat exchanger plates are interchangeable and easily cleaned. Decorative outer cover (1.2 mm 304 SS oil-grind) wipes clean with damp cloth. Sterilization cars and trolleys (304 SS) can be hosed down.
Documentación
Ficha técnica (PDF)
Resumen del equipo, especificaciones y dimensiones · Documento original (inglés)
Solicitar al equipo comercial
Manual del operador
Instalación, funcionamiento y diagnóstico · Documento original (inglés)
Solicitar al equipo comercial
Ficha comparativa (Estándar y Económica)
Comparación de configuraciones · Documento original (inglés)
Solicitar al equipo comercial
Protocolos IQ / OQ / PQ
Documentación de validación para conformidad GMP · Documento original (inglés)
Solicitar al equipo comercial
Protocolos FAT / SAT
Pruebas de aceptación en fábrica y en sitio · Documento original (inglés)
Solicitar al equipo comercial
Planos CAD (STEP / IGES / DWG)
Planos de ingeniería para la instalación · Documento original (inglés)
Solicitar al equipo comercial
Certificados de calibración
Nivel sonoro, resistencia de tierra, rigidez dieléctrica y rugosidad · Documento original (inglés)
Solicitar al equipo comercial
DQ (cualificación del diseño)
Protocolo completo de cualificación del diseño · Documento original (inglés)
Solicitar al equipo comercial
Certificados de materiales
Composición del acero inoxidable 316L · Documento original (inglés)
Solicitar al equipo comercial