SED-TS — Automatic Scoop Inserter
La descripción completa de este modelo aún se está traduciendo. Consulte los detalles en inglés o solicite información a nuestro equipo. English
SED-TS is an automatic scoop-inserter (also called scoop dropper) for powder packaging lines. The machine sorts plastic measuring scoops in a vibratory bowl, conveys them in an orderly chute, and pneumatically inserts a
Funcionamiento
Plastic measuring scoops are dumped into a vibratory bowl-feeder (sorter) which orients each scoop into a known attitude and feeds them in single file to a chute. Bottles travel on a conveyor (Maili motor controlled); when a SICK photoelectric sensor detects a bottle entering the insertion zone, a stop-pin halts it directly under the scoop drop position. The PLC then commands the AirTAC pneumatic insert mechanism (electromagnetic-valve-controlled cylinder) to drop the preset number of scoops (typically 1) into the bottle, then releases the bottle to continue downstream. No-bottle and bottle-jam conditions detected via photoelectric sensors trigger automatic stop. The vibratory feed rate is tuned via a vibration controller to match line speed.
Especificaciones técnicas
Especificaciones
Dimensiones
Materiales
Características principales
Aplicaciones
Sectores
Marcas de componentes
Conformidad
Limpieza y mantenimiento
Clean any residual scoops, bottles, dust or debris from the bench; verify scoop type meets process requirements; check pressure regulator at 0.6–0.8 MPa; keep all photoelectric sensor lenses clean (do not touch with fingers); maintain sensor mounting screws regularly so they do not loosen from cyclic vibration; do NOT change the proximity-sensor (origin) position of the insert mechanism arbitrarily.