SED-TS — Automatic Scoop Inserter
Die vollständige Beschreibung dieses Modells wird noch übersetzt. Lesen Sie die englischen Details oder fragen Sie unser Team nach weiteren Informationen. English
SED-TS is an automatic scoop-inserter (also called scoop dropper) for powder packaging lines. The machine sorts plastic measuring scoops in a vibratory bowl, conveys them in an orderly chute, and pneumatically inserts a
Funktionsweise
Plastic measuring scoops are dumped into a vibratory bowl-feeder (sorter) which orients each scoop into a known attitude and feeds them in single file to a chute. Bottles travel on a conveyor (Maili motor controlled); when a SICK photoelectric sensor detects a bottle entering the insertion zone, a stop-pin halts it directly under the scoop drop position. The PLC then commands the AirTAC pneumatic insert mechanism (electromagnetic-valve-controlled cylinder) to drop the preset number of scoops (typically 1) into the bottle, then releases the bottle to continue downstream. No-bottle and bottle-jam conditions detected via photoelectric sensors trigger automatic stop. The vibratory feed rate is tuned via a vibration controller to match line speed.
Technische Daten
Technische Daten
Abmessungen
Werkstoffe
Wesentliche Merkmale
Anwendungen
Branchen
Komponentenhersteller
Konformität
Reinigung und Wartung
Clean any residual scoops, bottles, dust or debris from the bench; verify scoop type meets process requirements; check pressure regulator at 0.6–0.8 MPa; keep all photoelectric sensor lenses clean (do not touch with fingers); maintain sensor mounting screws regularly so they do not loosen from cyclic vibration; do NOT change the proximity-sensor (origin) position of the insert mechanism arbitrarily.