Início / Equipamentos / Detecção de vazamentos / Sealing Tester / Leak Tester

SED-MCY-A

Consultar

SED · SED-MCY-A · 9 unidades vendidas

SED-MCY-A — Sealing Tester / Leak Tester

A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English

SED-MCY-A is a vacuum sealing tester (leak tester) designed and manufactured per GB/T 15171-94 — test method for sealing performance of flexible packaging — widely used for QC of food, pharmaceutical, daily-chemical and

Escolher variante (2)

Prazo de entrega

Consultar

Capacidade de produção

12–60 L/min extraction rate (vacuum-pump version)

Como funciona

Sample is placed inside the acrylic transparent vacuum tank with water around it (water level ~10 mm above the perforated press plate). The instrument evacuates the tank via either a compressed-air-driven Venturi vacuum generator (compressor version) or an external rotary-vane vacuum pump (vacuum-pump version). When the tank pressure reaches the set negative pressure ±accuracy band, the pump cycles off; if pressure rises above the band, the pump kicks back in. Sealed packaging in the water has higher internal pressure than the surrounding tank — leaks emit a stream of bubbles visible through the acrylic. After the user-set hold time elapses (1–9999 s), the instrument automatically opens the relief solenoid valve, returning tank pressure to atmospheric.

Processo de funcionamento

1Sample is placed inside the acrylic transparent vacuum tank with water around it (water level ~10 mm above the perforated press plate).

2The instrument evacuates the tank via either a compressed-air-driven Venturi vacuum generator (compressor version) or an external rotary-vane vacuum pump (vacuum-pump version).

3When the tank pressure reaches the set negative pressure ±accuracy band, the pump cycles off; if pressure rises above the band, the pump kicks back in.

4Sealed packaging in the water has higher internal pressure than the surrounding tank — leaks emit a stream of bubbles visible through the acrylic.

5After the user-set hold time elapses (1–9999 s), the instrument automatically opens the relief solenoid valve, returning tank pressure to atmospheric.

Especificações técnicas

Especificações da variante: SED-MCY-A air-compressor version (Venturi generator

Especificações

Modelo

SED-MCY-A

Capacidade de produção

12–60 L/min extraction rate (vacuum-pump version)

Tensão

AC 220V 50/60Hz, 200 W

Utilidades

AC 220V 50/60Hz, 200 W. Compressed air at 0.7 MPa for compressor version OR external rotary-vane vacuum pump (VALUE FY-1H-N) for vacuum-pump version. Reliable grounding.

Detalhes de conformidade

Designed per GB/T 15171-94 for flexible packaging sealing test. Reliable grounding required. Cannot be used in high-humidity, strong-corrosive-gas, strong-vibration or high-EMI environments.

Potência

0.2 kW

Pressão de ar

Pressure source 0.7 MPa (7 kgf/cm2) for compressor variant; vacuum 0-90 kPa (compressor) or 0-95 kPa (vacuum-pump)

Dimensões

Comprimento

300 mm

Largura

380 mm

Altura

200 mm

Peso

18 kg

Área de instalação

Controller 300 × 380 × 200 mm benchtop; vacuum tank Φ270 × 210 mm H standard, optional Φ360 × 585 mm or Φ460 × 330 mm. Reserve ≥1 m clearance. Ambient 10–40 °C; clean, dry, low-EMI environment.

Materiais

Materiais de contato

Acrylic transparent vacuum tank; SMC pneumatic fittings; PU 6 mm and 8 mm air tubing

Operação

Operating Humidity

<=85% RH

Operating Temperature

5-35 degC °C

Vacuum Accuracy

class 0.5

Vacuum Hold Time

2.5h h

Vacuum Range

0 to -90 kPa kPa

Resolution

0.1 kPa kPa

Características físicas

Air Port Size

Ø6mm polyurethane tube mm

Chamber Size

Ø270mm x 210mm H (standard)

Características principais

Vacuum range 0–90 kPa (compressor) or 0–95 kPa (vacuum-pump variant)

Pressure-display accuracy ±0.5 kPa, resolution 0.1 kPa

Vacuum hold time 1–9999 seconds (~277 hours)

Maximum holding pressure −99.9 kPa

Settable accuracy / hysteresis band per test recipe

Extraction rate 12 L/min (compressor) or 60 L/min (vacuum pump)

Acrylic transparent vacuum tank for visual leak observation

Standard tank Φ270 × 210 mm H; optional Φ360 × 585 mm and Φ460 × 330 mm

LCD display + touch-button human-machine interface (Chinese/English)

Auto pressurise / hold / release cycle with intelligent control

Manual mode (Start / Stop / Blow Back) for diagnostic operation

Designed to GB/T 15171-94

Pressure calibration function with on-screen wizard (password 3052)

SMC pneumatic components (Japan) — reliable, low maintenance

Front-panel result-record button for pass/fail logging

Net weight 18 kg; controller 300 × 380 × 200 mm; AC 220V / 200 W

Auto-detect zero point and altitude-compensation calibration

Beep indicator for last 5 seconds of countdown

Two vacuum-source options — reuse existing air compressor or attach VALUE rotary-vane pump

Acrylic transparent tank lets QC visually confirm leaks — simple training

Designed to national standard GB/T 15171-94 — export-ready

Wide tank size options for ampoules, blister, pouches, large bottles

SMC pneumatics + electronic pressure sensor — lab-grade accuracy

Lifetime maintenance support after 12-month warranty

Compact bench size suits any QC lab

Aplicações

Sealing test of flexible food / pharma / daily-chemical packaging

Vacuum leak test of blister packs, sachets, foil pouches

Sealing test of ampoules, vials, sealed bottles

Confirmation of packaging integrity after drop / pressure tests

QC sampling on production lines or incoming inspection

Setores

Pharmaceutical and nutraceutical packaging QC

Food and beverage packaging

Cosmetics / personal care

Daily chemical

Medical devices / sterile pouches

Laboratory / R&D

Marcas dos componentes

SMC, Japan (core pneumatic components)

VALUE/(FY-1H-N 1 L mini rotary-vane vacuum pump,vacuum-pump variant)

Acrylic vacuum tank (SED in-house)

SED

Fale com SED Sales Team

Especialistas em equipamentos · contato pelo WhatsApp

Consulte o horário e a disponibilidade da equipe

+86 139 5885 3738

Enviar e-mail Conversar no WhatsApp →Solicitar chamada de 30 minutos →

Limpeza e manutenção

Keep air source dry and clean; regularly clean inlet filter. Drain water from air compressor regularly. Keep equipment and surroundings clean. Periodically check pressure-display accuracy; recalibrate if drift is found (calibration password 3052). Check vacuum-pump oil level — keep between upper and lower marks; replace oil when emulsified or contaminated.

Documentação

Ficha técnica (PDF)

Visão geral do equipamento, especificações e dimensões · Documento original (inglês)

Solicitar à equipe de vendas

Manual do operador

Instalação, operação e diagnóstico · Documento original (inglês)

Solicitar à equipe de vendas

Folha comparativa (Padrão e Econômica)

Comparação das configurações · Documento original (inglês)

Solicitar à equipe de vendas

Protocolos IQ / OQ / PQ

Documentação de validação para conformidade GMP · Documento original (inglês)

Solicitar à equipe de vendas

Protocolos FAT / SAT

Testes de aceitação na fábrica e no local · Documento original (inglês)

Solicitar à equipe de vendas

Desenhos CAD (STEP / IGES / DWG)

Desenhos de engenharia para a instalação · Documento original (inglês)

Solicitar à equipe de vendas

Certificados de calibração

Nível sonoro, resistência de terra, rigidez dielétrica e rugosidade · Documento original (inglês)

Solicitar à equipe de vendas

DQ (qualificação do projeto)

Protocolo completo de qualificação do projeto · Documento original (inglês)

Solicitar à equipe de vendas

Certificados de materiais

Composição do aço inoxidável 316L · Documento original (inglês)

Solicitar à equipe de vendas