Início / Equipamentos / Seladora de embalagens termoformadas / Blister/Thermoforming Packaging Sealer
SED-570-450XSJ-A
Consultar
SED-570-450XSJ-A
SED · SED-570-450XSJ-A · Em destaque
SED-570-450XSJ-A — Blister/Thermoforming Packaging Sealer
A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English
SED-570*450XSJ-A is an automatic pressure-vacuum (positive + negative pressure) high-speed thermoforming machine with continuous 4-station operation: forming, punching, cutting, and manipulator stacking. Forms films in P
Prazo de entrega
Consultar
Capacidade de produção
35 molds/min
Como funciona
Pressure-vacuum (combined positive + negative pressure) thermoforming. Servo film-feed conveys plastic sheet through a patented sealed heating oven that brings it to forming temperature. The heated sheet enters the forming station where 6 servo-driven mold clamps close, and combined air pressure + vacuum forces the film into the mold cavities. The web then advances to a punching station (with optional indentation, bottom-hole and side-hole punching), then a transfer-cutting station with ±0.4 mm deviation, then a servo manipulator picks the parts and stacks them on a 2 m conveyor. Waste film is automatically rolled up; an in-line pulverizer can recycle scrap. Delta PLC + 10.4-inch Taiwan touch screen controls the line; Delta temperature controller maintains ±0.5 °C across multiple independently controlled heating zones with auto-compensation.
Processo de funcionamento
1Pressure-vacuum (combined positive + negative pressure) thermoforming.
2Servo film-feed conveys plastic sheet through a patented sealed heating oven that brings it to forming temperature.
3The heated sheet enters the forming station where 6 servo-driven mold clamps close, and combined air pressure + vacuum forces the film into the mold cavities.
4The web then advances to a punching station (with optional indentation, bottom-hole and side-hole punching), then a transfer-cutting station with ±0.4 mm deviation, then a servo manipulator picks the parts and stacks them on a 2 m conveyor.
5Waste film is automatically rolled up; an in-line pulverizer can recycle scrap.
6Delta PLC + 10.4-inch Taiwan touch screen controls the line; Delta temperature controller maintains ±0.5 °C across multiple independently controlled heating zones with auto-compensation.
Especificações técnicas
Especificações da variante: SED-570-450XSJ-A
Especificações
Modelo
SED-570-450XSJ-A
Capacidade de produção
35 molds/min
Tensão
380V 50/60Hz
Potência
75 kW
Pressão de ar
0.6-0.8 MPa, 0.5-3 m^3/min
Dimensões
Comprimento
9000 mm
Largura
1600 mm
Altura
2400 mm
Peso
7000 kg
Materiais
Materiais do corpo
120×60×5 / 120×60×3 mm square-tube frame; 300 steel die set frame, alloy steel columns; nitrided forged feed chain; alloy steel pin shaft; self-lubricating bearings
Características principais
Continuous 4-station: forming, punching, cutting, manipulator stacking
Max forming area 570 × 450 mm, depth 80 mm
Sheet 610 mm wide, 0.12–2 mm thick
Up to 35 molds/min
Pressure-vacuum (positive + negative pressure) forming with multiple modes
Patented sealed insulated heating oven (~30% energy saving vs. market)
6 × 1.8 kW Delta/Inovance servo mold clamps
Servo manipulator (3 kW + 0.8 kW) up to 35 cycles/min, 2 m stacking conveyor
Delta temperature controller, ±0.5 °C, independent point control
Cutting deviation ±0.4 mm; transfer cutting mode
Bidirectionally controlled mold board
In-line: indentation, bottom-hole punching, side-hole punching, edge cutting
Auto film feed, mold positioning, auto loading, waste rolling
Auto oven retreat on power-off / fault
10.4-inch Taiwan touch screen, Delta/Inovance medium PLC
Includes 100 L vacuum pump + 3 HP air-cooled chiller
Total electricity consumption ~150 kWh/ton of film
8-direction fine adjustment on cutting mold; electric chain-width adjustment (4 sets)
30% lower electricity vs. competing thermoformers thanks to patented oven
Servo manipulator removes need for human stacking and separate cutting machine
±0.4 mm cutting and ±0.5 °C heat control deliver tight tolerances
Wide material compatibility: PP, PE, PET, PVC, PETG, PS, ABS, EPS, APET, HIPS
Premium components: SMC/AirTAC pneumatics, THK rails, Delta/Inovance servos and PLC, AUTONICS sensors, Schneider/Omron/CHINT electrics, Harbin bearings
Aplicações
Electronics: semi-finished trays, electronics packaging
Frozen food trays, cup lids, bento boxes, jelly cups, moon cake trays
Fruit and vegetable trays / packaging boxes
Pharma: injection trays, solid/liquid medicine trays, bottle trays
Refrigerator inner liners, appliance blister parts and packaging
Tool packaging, alcohol packaging trays
Agricultural flowerpots, seeding trays
Auto parts blister packaging, helmet liners
Setores
Plastic packaging
Food packaging
Pharmaceutical packaging
Electronics
Appliance
Agriculture
Automotive
Tools / hardware
Marcas dos componentes
Servo motors and drives
Delta / Inovance
PLC (medium)
Delta / Inovance
Touch screen 10.4-inch
Taiwan
Photoelectric switch
AUTONICS
Solid-state relay
Italy / XIZI
Relay
Omron / Schneider
Pneumatic valves and cylinders
SMC / AirTAC
Vacuum valve (1")
SMC
Electrical components
Schneider / CHINT
Bearings
Harbin
Reducer motor
Jiangsu Jiangyan
Reducer
Taiwan
Linear sliding rail
THK
SED
Fale com SED Sales Team
Especialistas em equipamentos · contato pelo WhatsApp
Consulte o horário e a disponibilidade da equipe
Documentação
Ficha técnica (PDF)
Visão geral do equipamento, especificações e dimensões · Documento original (inglês)
Solicitar à equipe de vendas
Manual do operador
Instalação, operação e diagnóstico · Documento original (inglês)
Solicitar à equipe de vendas
Folha comparativa (Padrão e Econômica)
Comparação das configurações · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos IQ / OQ / PQ
Documentação de validação para conformidade GMP · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos FAT / SAT
Testes de aceitação na fábrica e no local · Documento original (inglês)
Solicitar à equipe de vendas
Desenhos CAD (STEP / IGES / DWG)
Desenhos de engenharia para a instalação · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de calibração
Nível sonoro, resistência de terra, rigidez dielétrica e rugosidade · Documento original (inglês)
Solicitar à equipe de vendas
DQ (qualificação do projeto)
Protocolo completo de qualificação do projeto · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de materiais
Composição do aço inoxidável 316L · Documento original (inglês)
Solicitar à equipe de vendas