Início / Equipamentos / Embaladora blíster média/grande de placas planas para sólidos (P, 250–500mm) / Automatic ALU/PVC and ALU/ALU Blister Packaging Machine

SED-250P-A

Consultar

SED · SED-250P-A · 14 unidades vendidas

SED-250P-A — Automatic ALU/PVC and ALU/ALU Blister Packaging Machine

A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English

SED-250P-A is a fully-automatic ALU/PVC and ALU/ALU blister packaging machine for capsules, uncoated tablets, sugar-coated tablets, big honey pills, injections, ampoules, surgical/medical instruments, and small electroni

Prazo de entrega

Consultar

Capacidade de produção

10–45 punches/min

Como funciona

PVC roll film is fed through a pre-heating box, then formed into blister cavities between upper and lower forming molds (heated to approximately 110/100°C plus encoder-controlled compressed air at 0.4–0.6 MPa). Material drops into the blister cavities through a brush or vibratory feeder. PTP aluminum foil from the second roll meets the PVC at the heat-sealing station (approximately 140–160°C). Batch number is embossed; tear lines are creased; stepper-motor traction advances the strip; the blanking mold cuts finished blister cards. PTP feeding and collecting devices use swing-arm sensors to keep tension constant. Heating molds automatically separate when the machine stops to prevent scalding film and extend mold life.

Processo de funcionamento

1PVC roll film is fed through a pre-heating box, then formed into blister cavities between upper and lower forming molds (heated to approximately 110/100°C plus encoder-controlled compressed air at 0.4–0.6 MPa).

2Material drops into the blister cavities through a brush or vibratory feeder.

3PTP aluminum foil from the second roll meets the PVC at the heat-sealing station (approximately 140–160°C).

4Batch number is embossed; tear lines are creased; stepper-motor traction advances the strip; the blanking mold cuts finished blister cards.

5PTP feeding and collecting devices use swing-arm sensors to keep tension constant.

6Heating molds automatically separate when the machine stops to prevent scalding film and extend mold life.

Especificações técnicas

Especificações da variante: SED-250P-A

Especificações

Modelo

SED-250P-A

Capacidade de produção

10–45 punches/min

Tensão

380V/220V 50Hz 3-phase

Utilidades

380V/220V 50Hz three-phase power, 8 kW total (1.7 kW main motor); compressed air 0.4–0.6 MPa, ≥0.45 m³/min from air compressor; tap water or recycling water for mold cooling; reliable grounding.

Detalhes de conformidade

Designed to meet pharmaceutical GMP packaging requirements; emergency-stop button on operator panel; reliable grounding required.

Potência

8 kW

Pressão de ar

0.4-0.6 MPa, air consumption >=0.45 m3/min from compressor

Dimensões

Comprimento

2900 mm

Largura

750 mm

Altura

1600 mm

Peso

1200 kg

Área de instalação

Reserve at least 1 m clearance around the machine; rear access for maintenance. Adjustable feet (±50 mm) match line height. Ambient 5–40°C, 20–85% RH.

Materiais

Materiais de contato

aço inoxidável 304

Materiais do corpo

aço inoxidável 304

Compatibilidade

Dialysis Paper

50-100 g x 270 mm

PTP Aluminum Foil

0.02-0.035 x 270 mm

PVC Hard Film

0.15-0.5 x 270 mm

Elétrica

Main Motor Power

1.7 kW

Operação

Compressed Air Required

≥0.45 m³/min

Mold Cooling

tap water or recycling water

Características físicas

Max. Forming Area

250x120 mm

Max Forming Depth (customized)

30 mm

Standard Forming Depth

≤15 mm

Standard Plate Size

80x57 mm

Standard Stroke Range

30-130 mm

Características principais

Punch frequency 10–45 times/min

Max forming area 250×120 mm; standard depth ≤15 mm, max 30 mm (customized)

Standard stroke 30–130 mm (customizable)

Standard plate size 80×57 mm (customizable)

PVC hard sheet: 0.15–0.5 mm × 270 mm

PTP aluminum foil: 0.02–0.035 mm × 270 mm

Dialysis paper: 50–100 g/m² × 270 mm

Encoder-controlled positive-pressure forming

Honeywell servo motor traction for precise pulling length

Stepper-motor traction saves packaging material

Auto separation of heating molds at stop — prevents film scalding, extends mold life

Delta PLC (DVP30EC) + WEINVIEW HMI (N.T506MV)

Delta inverter (VFD015B43A) for stepless speed control

Tap-water or recycling-water mold cooling

Photo-cell registration option for printed films

Built-in batch-number embossing, tear-line creasing and waste rewind

Brush/vibratory feeder for ALU-PVC; dedicated bubble-aligning feeder for ALU-ALU

Multifunction — one machine performs 10+ packaging steps in one continuous cycle

ALU-PVC and ALU-ALU compatible

Stainless steel 304 body meets pharmaceutical hygiene standards

Mold defined by locating slot — quick mold change

Stepper traction saves packaging material

International-brand components (Delta, OMRON, CHINT, WEINVIEW, Honeywell, MEAN WELL)

Better performance/price than comparable domestic and import equipment

Auto mold separation at stop protects film and extends machine life

1-year warranty (12 months from installation, no more than 16 months after delivery); lifetime maintenance service

Aplicações

Blister packaging of capsules, uncoated tablets, sugar-coated tablets, and big honey pills

Blister packaging of injections, ampoules, and dialysis-paper packs

Blister sealing of surgical/medical instruments

Blister packaging of small electronic components and hardware items

Food blister packaging

Setores

Farmacêutico

Medical instruments / hospitals

Food

Electronics

Hardware

Marcas dos componentes

Delta (PLC DVP30EC, frequency converter VFD015B43A)

WEINVIEW (Touch screen N.T506MV)

CHINT (AC contactor CJX2-2510 / CJX2-1210, air breaker NXB-63 C40 / DZ47-60 C10)

OMRON (intermediate relay MY2NJ, encoder ZLB2.806-G-360BM)

Honeywell (servo motor HSMC-80HP075A30EAYY-C, servo driver HS360-075-A)

Better Life (proximity switch J2-D4NK-M, time-delay J6-D7NK-T2, photoelectric switch BZJ-511)

MIGAIR (solid-state relay JGV-1D4825)

MINGWEI / MEAN WELL (switch power supply 110/220V)

SED

Fale com SED Sales Team

Especialistas em equipamentos · contato pelo WhatsApp

Consulte o horário e a disponibilidade da equipe

+86 139 5885 3738

Enviar e-mail Conversar no WhatsApp →Solicitar chamada de 30 minutos →

Limpeza e manutenção

Wipe outer/inner machine surfaces with a clean wet towel before and after each shift; open the hood and wipe internal parts. Clean mechanical parts with detergent (alcohol). Use a dry cloth on the touch screen, signal lights, photoelectric sensor windows, and pressure switches. Clean the air filter at the inlet to remove moisture/dirt. Use clean dry cloth on cylinders/gas-spring rods, then apply a few drops of pneumatic oil. Do not disassemble valves — contact manufacturer. Lubricate transmission chain and adjustment knobs monthly with oil (0–35°C) or every 3 months with grease (>35°C / <0°C); grease all bearings twice per year; No. 30 mechanical oil quarterly. Dust the electrical control cabinet weekly.

Documentação

Ficha técnica (PDF)

Visão geral do equipamento, especificações e dimensões · Documento original (inglês)

Solicitar à equipe de vendas

Manual do operador

Instalação, operação e diagnóstico · Documento original (inglês)

Solicitar à equipe de vendas

Folha comparativa (Padrão e Econômica)

Comparação das configurações · Documento original (inglês)

Solicitar à equipe de vendas

Protocolos IQ / OQ / PQ

Documentação de validação para conformidade GMP · Documento original (inglês)

Solicitar à equipe de vendas

Protocolos FAT / SAT

Testes de aceitação na fábrica e no local · Documento original (inglês)

Solicitar à equipe de vendas

Desenhos CAD (STEP / IGES / DWG)

Desenhos de engenharia para a instalação · Documento original (inglês)

Solicitar à equipe de vendas

Certificados de calibração

Nível sonoro, resistência de terra, rigidez dielétrica e rugosidade · Documento original (inglês)

Solicitar à equipe de vendas

DQ (qualificação do projeto)

Protocolo completo de qualificação do projeto · Documento original (inglês)

Solicitar à equipe de vendas

Certificados de materiais

Composição do aço inoxidável 316L · Documento original (inglês)

Solicitar à equipe de vendas