Accueil / Équipements / Conditionneuse blister moyenne/grande à plateaux pour solides (P, 250–500mm) / Automatic ALU/PVC and ALU/ALU Blister Packaging Machine

SED-250P-A

Sur devis

SED · SED-250P-A · 14 unités vendues

SED-250P-A — Automatic ALU/PVC and ALU/ALU Blister Packaging Machine

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-250P-A is a fully-automatic ALU/PVC and ALU/ALU blister packaging machine for capsules, uncoated tablets, sugar-coated tablets, big honey pills, injections, ampoules, surgical/medical instruments, and small electroni

Délai de livraison

Sur devis

Cadence

10–45 punches/min

Fonctionnement

PVC roll film is fed through a pre-heating box, then formed into blister cavities between upper and lower forming molds (heated to approximately 110/100°C plus encoder-controlled compressed air at 0.4–0.6 MPa). Material drops into the blister cavities through a brush or vibratory feeder. PTP aluminum foil from the second roll meets the PVC at the heat-sealing station (approximately 140–160°C). Batch number is embossed; tear lines are creased; stepper-motor traction advances the strip; the blanking mold cuts finished blister cards. PTP feeding and collecting devices use swing-arm sensors to keep tension constant. Heating molds automatically separate when the machine stops to prevent scalding film and extend mold life.

Processus de fonctionnement

1PVC roll film is fed through a pre-heating box, then formed into blister cavities between upper and lower forming molds (heated to approximately 110/100°C plus encoder-controlled compressed air at 0.4–0.6 MPa).

2Material drops into the blister cavities through a brush or vibratory feeder.

3PTP aluminum foil from the second roll meets the PVC at the heat-sealing station (approximately 140–160°C).

4Batch number is embossed; tear lines are creased; stepper-motor traction advances the strip; the blanking mold cuts finished blister cards.

5PTP feeding and collecting devices use swing-arm sensors to keep tension constant.

6Heating molds automatically separate when the machine stops to prevent scalding film and extend mold life.

Caractéristiques techniques

Caractéristiques de la variante : SED-250P-A

Caractéristiques

Modèle

SED-250P-A

Cadence

10–45 punches/min

Tension

380V/220V 50Hz 3-phase

Fluides et énergie

380V/220V 50Hz three-phase power, 8 kW total (1.7 kW main motor); compressed air 0.4–0.6 MPa, ≥0.45 m³/min from air compressor; tap water or recycling water for mold cooling; reliable grounding.

Détails de conformité

Designed to meet pharmaceutical GMP packaging requirements; emergency-stop button on operator panel; reliable grounding required.

Puissance

8 kW

Pression d’air

0.4-0.6 MPa, air consumption >=0.45 m3/min from compressor

Dimensions

Longueur

2900 mm

Largeur

750 mm

Hauteur

1600 mm

Poids

1200 kg

Emprise au sol

Reserve at least 1 m clearance around the machine; rear access for maintenance. Adjustable feet (±50 mm) match line height. Ambient 5–40°C, 20–85% RH.

Matériaux

Matériaux en contact

acier inoxydable 304

Matériaux du bâti

acier inoxydable 304

Compatibilité

Dialysis Paper

50-100 g x 270 mm

PTP Aluminum Foil

0.02-0.035 x 270 mm

PVC Hard Film

0.15-0.5 x 270 mm

Alimentation électrique

Main Motor Power

1.7 kW

Fonctionnement

Compressed Air Required

≥0.45 m³/min

Mold Cooling

tap water or recycling water

Caractéristiques physiques

Max. Forming Area

250x120 mm

Max Forming Depth (customized)

30 mm

Standard Forming Depth

≤15 mm

Standard Plate Size

80x57 mm

Standard Stroke Range

30-130 mm

Caractéristiques principales

Punch frequency 10–45 times/min

Max forming area 250×120 mm; standard depth ≤15 mm, max 30 mm (customized)

Standard stroke 30–130 mm (customizable)

Standard plate size 80×57 mm (customizable)

PVC hard sheet: 0.15–0.5 mm × 270 mm

PTP aluminum foil: 0.02–0.035 mm × 270 mm

Dialysis paper: 50–100 g/m² × 270 mm

Encoder-controlled positive-pressure forming

Honeywell servo motor traction for precise pulling length

Stepper-motor traction saves packaging material

Auto separation of heating molds at stop — prevents film scalding, extends mold life

Delta PLC (DVP30EC) + WEINVIEW HMI (N.T506MV)

Delta inverter (VFD015B43A) for stepless speed control

Tap-water or recycling-water mold cooling

Photo-cell registration option for printed films

Built-in batch-number embossing, tear-line creasing and waste rewind

Brush/vibratory feeder for ALU-PVC; dedicated bubble-aligning feeder for ALU-ALU

Multifunction — one machine performs 10+ packaging steps in one continuous cycle

ALU-PVC and ALU-ALU compatible

Stainless steel 304 body meets pharmaceutical hygiene standards

Mold defined by locating slot — quick mold change

Stepper traction saves packaging material

International-brand components (Delta, OMRON, CHINT, WEINVIEW, Honeywell, MEAN WELL)

Better performance/price than comparable domestic and import equipment

Auto mold separation at stop protects film and extends machine life

1-year warranty (12 months from installation, no more than 16 months after delivery); lifetime maintenance service

Applications

Blister packaging of capsules, uncoated tablets, sugar-coated tablets, and big honey pills

Blister packaging of injections, ampoules, and dialysis-paper packs

Blister sealing of surgical/medical instruments

Blister packaging of small electronic components and hardware items

Food blister packaging

Secteurs

Pharmaceutique

Medical instruments / hospitals

Food

Electronics

Hardware

Marques des composants

Delta (PLC DVP30EC, frequency converter VFD015B43A)

WEINVIEW (Touch screen N.T506MV)

CHINT (AC contactor CJX2-2510 / CJX2-1210, air breaker NXB-63 C40 / DZ47-60 C10)

OMRON (intermediate relay MY2NJ, encoder ZLB2.806-G-360BM)

Honeywell (servo motor HSMC-80HP075A30EAYY-C, servo driver HS360-075-A)

Better Life (proximity switch J2-D4NK-M, time-delay J6-D7NK-T2, photoelectric switch BZJ-511)

MIGAIR (solid-state relay JGV-1D4825)

MINGWEI / MEAN WELL (switch power supply 110/220V)

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

Wipe outer/inner machine surfaces with a clean wet towel before and after each shift; open the hood and wipe internal parts. Clean mechanical parts with detergent (alcohol). Use a dry cloth on the touch screen, signal lights, photoelectric sensor windows, and pressure switches. Clean the air filter at the inlet to remove moisture/dirt. Use clean dry cloth on cylinders/gas-spring rods, then apply a few drops of pneumatic oil. Do not disassemble valves — contact manufacturer. Lubricate transmission chain and adjustment knobs monthly with oil (0–35°C) or every 3 months with grease (>35°C / <0°C); grease all bearings twice per year; No. 30 mechanical oil quarterly. Dust the electrical control cabinet weekly.