Startseite / Maschinen / Mittlere/große Flachplatten-Blistermaschine für Feststoffe (P, 250–500mm) / Automatic ALU/PVC and ALU/ALU Blister Packaging Machine

SED-250P-A

Auf Anfrage

SED · SED-250P-A · 14 verkaufte Einheiten

SED-250P-A — Automatic ALU/PVC and ALU/ALU Blister Packaging Machine

Die vollständige Beschreibung dieses Modells wird noch übersetzt. Lesen Sie die englischen Details oder fragen Sie unser Team nach weiteren Informationen. English

SED-250P-A is a fully-automatic ALU/PVC and ALU/ALU blister packaging machine for capsules, uncoated tablets, sugar-coated tablets, big honey pills, injections, ampoules, surgical/medical instruments, and small electroni

Lieferzeit

Auf Anfrage

Durchsatz

10–45 punches/min

Funktionsweise

PVC roll film is fed through a pre-heating box, then formed into blister cavities between upper and lower forming molds (heated to approximately 110/100°C plus encoder-controlled compressed air at 0.4–0.6 MPa). Material drops into the blister cavities through a brush or vibratory feeder. PTP aluminum foil from the second roll meets the PVC at the heat-sealing station (approximately 140–160°C). Batch number is embossed; tear lines are creased; stepper-motor traction advances the strip; the blanking mold cuts finished blister cards. PTP feeding and collecting devices use swing-arm sensors to keep tension constant. Heating molds automatically separate when the machine stops to prevent scalding film and extend mold life.

Prozessbeschreibung

1PVC roll film is fed through a pre-heating box, then formed into blister cavities between upper and lower forming molds (heated to approximately 110/100°C plus encoder-controlled compressed air at 0.4–0.6 MPa).

2Material drops into the blister cavities through a brush or vibratory feeder.

3PTP aluminum foil from the second roll meets the PVC at the heat-sealing station (approximately 140–160°C).

4Batch number is embossed; tear lines are creased; stepper-motor traction advances the strip; the blanking mold cuts finished blister cards.

5PTP feeding and collecting devices use swing-arm sensors to keep tension constant.

6Heating molds automatically separate when the machine stops to prevent scalding film and extend mold life.

Technische Daten

Technische Daten für Variante: SED-250P-A

Technische Daten

Modell

SED-250P-A

Durchsatz

10–45 punches/min

Spannung

380V/220V 50Hz 3-phase

Versorgung

380V/220V 50Hz three-phase power, 8 kW total (1.7 kW main motor); compressed air 0.4–0.6 MPa, ≥0.45 m³/min from air compressor; tap water or recycling water for mold cooling; reliable grounding.

Konformitätsangaben

Designed to meet pharmaceutical GMP packaging requirements; emergency-stop button on operator panel; reliable grounding required.

Leistung

8 kW

Luftdruck

0.4-0.6 MPa, air consumption >=0.45 m3/min from compressor

Abmessungen

Länge

2900 mm

Breite

750 mm

Höhe

1600 mm

Gewicht

1200 kg

Aufstellfläche

Reserve at least 1 m clearance around the machine; rear access for maintenance. Adjustable feet (±50 mm) match line height. Ambient 5–40°C, 20–85% RH.

Werkstoffe

Kontaktwerkstoffe

Edelstahl 304

Gehäusewerkstoffe

Edelstahl 304

Kompatibilität

Dialysis Paper

50-100 g x 270 mm

PTP Aluminum Foil

0.02-0.035 x 270 mm

PVC Hard Film

0.15-0.5 x 270 mm

Elektrik

Main Motor Power

1.7 kW

Betrieb

Compressed Air Required

≥0.45 m³/min

Mold Cooling

tap water or recycling water

Physikalische Angaben

Max. Forming Area

250x120 mm

Max Forming Depth (customized)

30 mm

Standard Forming Depth

≤15 mm

Standard Plate Size

80x57 mm

Standard Stroke Range

30-130 mm

Wesentliche Merkmale

Punch frequency 10–45 times/min

Max forming area 250×120 mm; standard depth ≤15 mm, max 30 mm (customized)

Standard stroke 30–130 mm (customizable)

Standard plate size 80×57 mm (customizable)

PVC hard sheet: 0.15–0.5 mm × 270 mm

PTP aluminum foil: 0.02–0.035 mm × 270 mm

Dialysis paper: 50–100 g/m² × 270 mm

Encoder-controlled positive-pressure forming

Honeywell servo motor traction for precise pulling length

Stepper-motor traction saves packaging material

Auto separation of heating molds at stop — prevents film scalding, extends mold life

Delta PLC (DVP30EC) + WEINVIEW HMI (N.T506MV)

Delta inverter (VFD015B43A) for stepless speed control

Tap-water or recycling-water mold cooling

Photo-cell registration option for printed films

Built-in batch-number embossing, tear-line creasing and waste rewind

Brush/vibratory feeder for ALU-PVC; dedicated bubble-aligning feeder for ALU-ALU

Multifunction — one machine performs 10+ packaging steps in one continuous cycle

ALU-PVC and ALU-ALU compatible

Stainless steel 304 body meets pharmaceutical hygiene standards

Mold defined by locating slot — quick mold change

Stepper traction saves packaging material

International-brand components (Delta, OMRON, CHINT, WEINVIEW, Honeywell, MEAN WELL)

Better performance/price than comparable domestic and import equipment

Auto mold separation at stop protects film and extends machine life

1-year warranty (12 months from installation, no more than 16 months after delivery); lifetime maintenance service

Anwendungen

Blister packaging of capsules, uncoated tablets, sugar-coated tablets, and big honey pills

Blister packaging of injections, ampoules, and dialysis-paper packs

Blister sealing of surgical/medical instruments

Blister packaging of small electronic components and hardware items

Food blister packaging

Branchen

Pharma

Medical instruments / hospitals

Food

Electronics

Hardware

Komponentenhersteller

Delta (PLC DVP30EC, frequency converter VFD015B43A)

WEINVIEW (Touch screen N.T506MV)

CHINT (AC contactor CJX2-2510 / CJX2-1210, air breaker NXB-63 C40 / DZ47-60 C10)

OMRON (intermediate relay MY2NJ, encoder ZLB2.806-G-360BM)

Honeywell (servo motor HSMC-80HP075A30EAYY-C, servo driver HS360-075-A)

Better Life (proximity switch J2-D4NK-M, time-delay J6-D7NK-T2, photoelectric switch BZJ-511)

MIGAIR (solid-state relay JGV-1D4825)

MINGWEI / MEAN WELL (switch power supply 110/220V)

SED

Sprechen Sie mit SED Sales Team

Maschinenspezialisten · Kontakt per WhatsApp

Geschäftszeiten und Verfügbarkeit beim Team erfragen

+86 139 5885 3738

E-Mail senden Auf WhatsApp chatten →30-Minuten-Gespräch anfragen →

Reinigung und Wartung

Wipe outer/inner machine surfaces with a clean wet towel before and after each shift; open the hood and wipe internal parts. Clean mechanical parts with detergent (alcohol). Use a dry cloth on the touch screen, signal lights, photoelectric sensor windows, and pressure switches. Clean the air filter at the inlet to remove moisture/dirt. Use clean dry cloth on cylinders/gas-spring rods, then apply a few drops of pneumatic oil. Do not disassemble valves — contact manufacturer. Lubricate transmission chain and adjustment knobs monthly with oil (0–35°C) or every 3 months with grease (>35°C / <0°C); grease all bearings twice per year; No. 30 mechanical oil quarterly. Dust the electrical control cabinet weekly.

Dokumentation

Datenblatt (PDF)

Überblick, technische Daten und Abmessungen · Originaldokument (Englisch)

Beim Vertrieb anfragen

Bedienhandbuch

Einrichtung, Betrieb und Fehlersuche · Originaldokument (Englisch)

Beim Vertrieb anfragen

Vergleichsdatenblatt (Standard und Economy)

Vergleich der Konfigurationen · Originaldokument (Englisch)

Beim Vertrieb anfragen

IQ / OQ / PQ-Protokolle

Validierungsunterlagen zur GMP-Konformität · Originaldokument (Englisch)

Beim Vertrieb anfragen

FAT / SAT-Protokolle

Abnahmeprüfungen im Werk und vor Ort · Originaldokument (Englisch)

Beim Vertrieb anfragen

CAD-Zeichnungen (STEP / IGES / DWG)

Konstruktionszeichnungen für die Aufstellung · Originaldokument (Englisch)

Beim Vertrieb anfragen

Kalibrierzertifikate

Schallpegel, Erdungswiderstand, Spannungsfestigkeit und Rauheit · Originaldokument (Englisch)

Beim Vertrieb anfragen

DQ (Designqualifizierung)

Vollständiges Designqualifizierungsprotokoll · Originaldokument (Englisch)

Beim Vertrieb anfragen

Werkstoffzeugnisse

Zusammensetzung des Edelstahls 316L · Originaldokument (Englisch)

Beim Vertrieb anfragen