Showroom em Ontario, Califórnia · Consulte o suporte para seu destino
SED-10SZ-H
Consultar
SED-10SZ-H Misturador-granulador úmido
SED · SED-10SZ-H · 1 unidades vendidas

SED-10SZ-H — Misturador-granulador úmido

A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English

SED-10SZ-H Wet Mixing Granulator (high-shear wet mixer-granulator). New-generation pharmaceutical equipment that quickly mixes dry powder and produces homogeneous wet granules in one step. Combines mixing and granulation

GMP compliant
Prazo de entrega
Consultar
Capacidade de produção
4–24 kg/hour

Como funciona

Three-blade impeller in a SUS304 mixing drum performs a regular spiral 3D motion that fully blends raw and auxiliary materials, including those at the bottom. After binder is added and material is wetted, an independently driven multi-layer herringbone chopper rotates at high speed to cut agglomerates into uniform granules. Mixing, wetting, and granulation run continuously, finishing in roughly ten minutes. Pneumatic discharge valve and air-sealed shafts on both impeller and chopper prevent contamination.

Processo de funcionamento
1Three-blade impeller in a SUS304 mixing drum performs a regular spiral 3D motion that fully blends raw and auxiliary materials, including those at the bottom.
2After binder is added and material is wetted, an independently driven multi-layer herringbone chopper rotates at high speed to cut agglomerates into uniform granules.
3Mixing, wetting, and granulation run continuously, finishing in roughly ten minutes.
4Pneumatic discharge valve and air-sealed shafts on both impeller and chopper prevent contamination.

Especificações técnicas

Especificações da variante: SED-10SZ-H

Especificações

Modelo
SED-10SZ-H
Capacidade de produção
4–24 kg/hour
Utilidades
Electrical supply for 2.2 kW mixing motor + 0.75–1.1 kW chopper motor; compressed air ≥ 0.5 MPa for shaft air-seal and pneumatic discharge cylinder.
Detalhes de conformidade
Conforms to GMP standards. Compressed air above 0.5 MPa required for shaft air-seal during operation.
Potência
3.3 kW

Dimensões

Comprimento
1300 mm
Largura
650 mm
Altura
1200 mm
Peso
182 kg
Área de instalação
1300 mm x 650 mm floor footprint, 1200 mm tall; no foundation required, install on level ground; allow surrounding clearance for maintenance.

Materiais

Materiais de contato
SUS304; silicone rubber (lid seal)
Materiais do corpo
5# channel-steel welded frame; SUS304 (drum, paddles, chopper, frame panels)

Características principais

Drum volume: 10 L
Output: 3 kg/batch
Mixing speed: 300/600 rpm (low/high)
Mixing motor power: 1.5/2.2 kW (dual speed)
Cutting (chopper) speed: 1500/3000 rpm
Cutting motor power: 0.85/1.1 kW
Cylindrical bottom + conical top SUS304 drum, no dead corners
Pneumatic discharge valve on drum bottom
Silicone rubber lid seal + air-seal on drive shafts
Safety interlock: cannot start when lid open or discharge cleaning open
Granulation cycle ~10 minutes
Saves 20-25% binder vs. older granulators; shortens drying time
Combinable with one-step boiling granulator/dryer
Dimensions: 1300 x 650 x 1200 mm
Weight: 182 kg
Total power: 3.3 kW
GMP compliant
4× efficiency over traditional swing granulators
One-step mix + wet + granulate eliminates manual contact contamination
Reliable air-sealed shafts and pneumatic discharge valve
Built with SUS304 stainless contact surfaces
Reproducible parameters via current monitoring at end-point

Aplicações

Pharmaceutical wet granulation
Health-product wet granulation
Food powder granulation
Cosmetic granulation
Powder metallurgy
Dye and detergent granulation

Setores

Farmacêutico
Chemical
Food
Powder metallurgy
Cosméticos
Dyes
Detergents

Marcas dos componentes

Chint (electrical)
SED
Fale com SED Sales Team
Especialistas em equipamentos · contato pelo WhatsApp
Consulte o horário e a disponibilidade da equipe

Conformidade

GMP compliant

Limpeza e manutenção

Add water into the drum and start mixer impeller and chopper to wash; discharge port and lid have sealing components for clean operation. Periodically drain the air source oil-water separator to prevent water accumulation. Inspect drum lid sealing strip and replace if damaged.

Documentação

Ficha técnica (PDF)
Visão geral do equipamento, especificações e dimensões · Documento original (inglês)
Solicitar à equipe de vendas
Manual do operador
Instalação, operação e diagnóstico · Documento original (inglês)
Solicitar à equipe de vendas
Folha comparativa (Padrão e Econômica)
Comparação das configurações · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos IQ / OQ / PQ
Documentação de validação para conformidade GMP · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos FAT / SAT
Testes de aceitação na fábrica e no local · Documento original (inglês)
Solicitar à equipe de vendas
Desenhos CAD (STEP / IGES / DWG)
Desenhos de engenharia para a instalação · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de calibração
Nível sonoro, resistência de terra, rigidez dielétrica e rugosidade · Documento original (inglês)
Solicitar à equipe de vendas
DQ (qualificação do projeto)
Protocolo completo de qualificação do projeto · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de materiais
Composição do aço inoxidável 316L · Documento original (inglês)
Solicitar à equipe de vendas
SED
WhatsApp · Vendas SED
Contato comercial · WhatsApp
→