Ausstellung in Ontario, Kalifornien · Support am Zielort anfragen
Startseite / Maschinen / Labor-/Pilot-Nassmischgranulator (<25 L) / Wet Mixing Granulator (10 L, High-Shear)
SED-10SZ-H
Auf Anfrage
SED-10SZ-H Nassmischgranulator
SED · SED-10SZ-H · 1 verkaufte Einheiten

SED-10SZ-H — Nassmischgranulator

Die vollständige Beschreibung dieses Modells wird noch übersetzt. Lesen Sie die englischen Details oder fragen Sie unser Team nach weiteren Informationen. English

SED-10SZ-H Wet Mixing Granulator (high-shear wet mixer-granulator). New-generation pharmaceutical equipment that quickly mixes dry powder and produces homogeneous wet granules in one step. Combines mixing and granulation

GMP compliant
Lieferzeit
Auf Anfrage
Durchsatz
4–24 kg/hour

Funktionsweise

Three-blade impeller in a SUS304 mixing drum performs a regular spiral 3D motion that fully blends raw and auxiliary materials, including those at the bottom. After binder is added and material is wetted, an independently driven multi-layer herringbone chopper rotates at high speed to cut agglomerates into uniform granules. Mixing, wetting, and granulation run continuously, finishing in roughly ten minutes. Pneumatic discharge valve and air-sealed shafts on both impeller and chopper prevent contamination.

Prozessbeschreibung
1Three-blade impeller in a SUS304 mixing drum performs a regular spiral 3D motion that fully blends raw and auxiliary materials, including those at the bottom.
2After binder is added and material is wetted, an independently driven multi-layer herringbone chopper rotates at high speed to cut agglomerates into uniform granules.
3Mixing, wetting, and granulation run continuously, finishing in roughly ten minutes.
4Pneumatic discharge valve and air-sealed shafts on both impeller and chopper prevent contamination.

Technische Daten

Technische Daten für Variante: SED-10SZ-H

Technische Daten

Modell
SED-10SZ-H
Durchsatz
4–24 kg/hour
Versorgung
Electrical supply for 2.2 kW mixing motor + 0.75–1.1 kW chopper motor; compressed air ≥ 0.5 MPa for shaft air-seal and pneumatic discharge cylinder.
Konformitätsangaben
Conforms to GMP standards. Compressed air above 0.5 MPa required for shaft air-seal during operation.
Leistung
3.3 kW

Abmessungen

Länge
1300 mm
Breite
650 mm
Höhe
1200 mm
Gewicht
182 kg
Aufstellfläche
1300 mm x 650 mm floor footprint, 1200 mm tall; no foundation required, install on level ground; allow surrounding clearance for maintenance.

Werkstoffe

Kontaktwerkstoffe
SUS304; silicone rubber (lid seal)
Gehäusewerkstoffe
5# channel-steel welded frame; SUS304 (drum, paddles, chopper, frame panels)

Wesentliche Merkmale

Drum volume: 10 L
Output: 3 kg/batch
Mixing speed: 300/600 rpm (low/high)
Mixing motor power: 1.5/2.2 kW (dual speed)
Cutting (chopper) speed: 1500/3000 rpm
Cutting motor power: 0.85/1.1 kW
Cylindrical bottom + conical top SUS304 drum, no dead corners
Pneumatic discharge valve on drum bottom
Silicone rubber lid seal + air-seal on drive shafts
Safety interlock: cannot start when lid open or discharge cleaning open
Granulation cycle ~10 minutes
Saves 20-25% binder vs. older granulators; shortens drying time
Combinable with one-step boiling granulator/dryer
Dimensions: 1300 x 650 x 1200 mm
Weight: 182 kg
Total power: 3.3 kW
GMP compliant
4× efficiency over traditional swing granulators
One-step mix + wet + granulate eliminates manual contact contamination
Reliable air-sealed shafts and pneumatic discharge valve
Built with SUS304 stainless contact surfaces
Reproducible parameters via current monitoring at end-point

Anwendungen

Pharmaceutical wet granulation
Health-product wet granulation
Food powder granulation
Cosmetic granulation
Powder metallurgy
Dye and detergent granulation

Branchen

Pharma
Chemical
Food
Powder metallurgy
Kosmetik
Dyes
Detergents

Komponentenhersteller

Chint (electrical)
SED
Sprechen Sie mit SED Sales Team
Maschinenspezialisten · Kontakt per WhatsApp
Geschäftszeiten und Verfügbarkeit beim Team erfragen

Konformität

GMP compliant

Reinigung und Wartung

Add water into the drum and start mixer impeller and chopper to wash; discharge port and lid have sealing components for clean operation. Periodically drain the air source oil-water separator to prevent water accumulation. Inspect drum lid sealing strip and replace if damaged.

Dokumentation

Datenblatt (PDF)
Überblick, technische Daten und Abmessungen · Originaldokument (Englisch)
Beim Vertrieb anfragen
Bedienhandbuch
Einrichtung, Betrieb und Fehlersuche · Originaldokument (Englisch)
Beim Vertrieb anfragen
Vergleichsdatenblatt (Standard und Economy)
Vergleich der Konfigurationen · Originaldokument (Englisch)
Beim Vertrieb anfragen
IQ / OQ / PQ-Protokolle
Validierungsunterlagen zur GMP-Konformität · Originaldokument (Englisch)
Beim Vertrieb anfragen
FAT / SAT-Protokolle
Abnahmeprüfungen im Werk und vor Ort · Originaldokument (Englisch)
Beim Vertrieb anfragen
CAD-Zeichnungen (STEP / IGES / DWG)
Konstruktionszeichnungen für die Aufstellung · Originaldokument (Englisch)
Beim Vertrieb anfragen
Kalibrierzertifikate
Schallpegel, Erdungswiderstand, Spannungsfestigkeit und Rauheit · Originaldokument (Englisch)
Beim Vertrieb anfragen
DQ (Designqualifizierung)
Vollständiges Designqualifizierungsprotokoll · Originaldokument (Englisch)
Beim Vertrieb anfragen
Werkstoffzeugnisse
Zusammensetzung des Edelstahls 316L · Originaldokument (Englisch)
Beim Vertrieb anfragen
SED
WhatsApp · SED Vertrieb
Vertriebskontakt · WhatsApp
→