Início / Equipamentos / Autoclave de vapor puro / SED-0.8CM-J Pure Steam Sterilizer (Gas-Sealed Double-Leaf Motorized Doors)
SED-0.8CM-J
Consultar
SED-0.8CM-J
SED · SED-0.8CM-J · Em destaque
SED-0.8CM-J — SED-0.8CM-J Pure Steam Sterilizer
A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English
SED-0.8CM-J pure steam sterilizer (autoclave) — gas-sealed, double-leaf motorized pass-through doors. Horizontal rectangular design with inner chamber 6 mm 316L stainless steel and jacket 6 mm 304 stainless steel. Confor
Prazo de entrega
Consultar
Capacidade de produção
Fale conosco
Como funciona
Saturated pure steam is used as the sterilization medium in the inner chamber. Jacket ordinary boiler steam preheats and maintains chamber wall temperature to prevent condensation-induced temperature drops. The double-leaf motorized doors are gas-sealed with medical-grade silicone gaskets. Door interlocks prevent opening while chamber is pressurized; steam admission is blocked unless doors are fully sealed. Temperature and pressure are monitored by Pt100 probes and HUBA sensors; cycle data are printed and recorded by a micro printer with EPSON chip.
Processo de funcionamento
1Saturated pure steam is used as the sterilization medium in the inner chamber.
2Jacket ordinary boiler steam preheats and maintains chamber wall temperature to prevent condensation-induced temperature drops.
3The double-leaf motorized doors are gas-sealed with medical-grade silicone gaskets.
4Door interlocks prevent opening while chamber is pressurized; steam admission is blocked unless doors are fully sealed.
5Temperature and pressure are monitored by Pt100 probes and HUBA sensors; cycle data are printed and recorded by a micro printer with EPSON chip.
Especificações técnicas
Especificações da variante: SED-0.8CM-J
Especificações
Modelo
SED-0.8CM-J
Tensão
AC380V 50Hz, 3-phase 5-wire
Utilidades
Drinking-grade pure water: 0.1–0.3 MPa, ~220 kg per cycle; Plant steam: 0.4–0.6 MPa, ~40 kg per cycle; Compressed air: 0.5–0.7 MPa; Electrical: AC380V / 50Hz, 3-phase 5-wire, 2.5 kW.
Detalhes de conformidade
Designed and manufactured to GB/T 150.1~4-2024 (Class I pressure vessel). X-ray flaw inspection on all welds; full quality certificates supplied. Pressure vessel utility piping in 316L sanitary tubing with tri-clover connections.
Potência
2.5 kW
Pressão de ar
Working pressure 0.25 MPa; design pressure 0.3 MPa; ultimate vacuum -0.095 MPa
Dimensões
Comprimento
1680 mm
Largura
1400 mm
Altura
1920 mm
Peso
1400 kg
Área de instalação
1680 × 1400 × 1920 mm (L×W×H), net weight 1400 kg. Pass-through configuration requires wall opening sized to outer envelope. Utilities entry: pure water 0.1–0.3 MPa, plant steam 0.4–0.6 MPa, compressed air 0.5–0.7 MPa, power 380V 2.5 kW.
Materiais
Materiais de contato
316L stainless steel (6 mm inner chamber, 8 mm door panels, sanitary tubing, sterilization cart and sterilization tray); medical-grade pharmaceutical-grade silicone gaskets
Materiais do corpo
316L stainless steel (chamber); 304 stainless steel (jacket and outer panels)
Características principais
Double-leaf motorized doors with safety + pressure interlocks (door cannot open while chamber pressurized; chamber cannot admit steam unless door sealed)
Inner chamber 6 mm 316L SS; jacket 6 mm 304 SS; door panels 8 mm 316L SS
Gas-sealed door with medical-grade pharmaceutical-grade silicone gasket, compressed-air automatic sealing
50 mm aluminum-silicate insulation; 1.2 mm 304 brushed-stainless decorative outer panels
Heat uniformity ≤ ±1 °C; ultimate vacuum -0.095 MPa
Working temperature 139 °C (design 144 °C); working pressure 0.25 MPa (design 0.3 MPa)
Two Pt100 temperature probes (chamber and in-load liquid) with dual temperature display
Real-time chart recorder + micro printer: pressure / temperature / time / F0 reports and trend charts
316L sanitary tubing on chamber utility lines; tri-clover quick-clamp connections
Pneumatic angle-seat valves on steam-trap line prevent reverse cross-contamination
X-ray weld inspection on all chamber welds with full quality certificates
Includes 1 × 316L sterilization cart + 2 × 304 transport carts
Designed to GMP, suitable for sterile pharmaceutical / biopharma manufacturing in B/C cleanrooms
Premium imported instrumentation: Siemens PLC, ASCO valves, GEMU valves, HUBA pressure transmitter, B+B Pt100 probes
316L sanitary contact surfaces and tri-clover connections meet pure-steam GMP requirements
Double-door pass-through enables clean/non-clean barrier separation
Custom sterilization programs available for biopharma processes
Aplicações
Sterilization of sterile garments, gowns and textiles
Sterilization of antibiotics and other heat-stable pharmaceuticals
Sterilization of filling rubber stoppers, aluminum caps and aluminum barrels
Small-volume open-container liquid sterilization
Sterilization of equipment / containers used in Class 100 (Grade A) filling areas
Setores
Pharmaceutical (sterile / injectable)
Biopharmaceutical
Medical devices
GMP B/C cleanroom operations
Marcas dos componentes
Siemens Germany (S7-200 PLC)
ASCO USA (angle pneumatic valves, 4 million-cycle life)
GEMU Germany (diaphragm valves)
HUBA Switzerland (pressure transmitter)
B+B Germany (soft Pt100 temperature probes)
Ereith / Airuisi (hard Pt100 temperature probes)
Airtac Taiwan (solenoid valves)
Pingtong Taiwan (touch screen)
Weihuang Beijing (micro printer with EPSON chip)
Brady Beijing (pressure gauges)
Yulong Shanghai (water-ring vacuum pump)
Shatong Precision (0.22 μm sterile air filter)
Guangyi Zhejiang (safety valve, 0.1–0.3 MPa)
SED
Fale com SED Sales Team
Especialistas em equipamentos · contato pelo WhatsApp
Consulte o horário e a disponibilidade da equipe
Conformidade
GB/T 150.1~4-2024 (Chinese steel pressure vessel code, Class I pressure vessel)
GMP-compliant design
Documentação
Ficha técnica (PDF)
Visão geral do equipamento, especificações e dimensões · Documento original (inglês)
Solicitar à equipe de vendas
Manual do operador
Instalação, operação e diagnóstico · Documento original (inglês)
Solicitar à equipe de vendas
Folha comparativa (Padrão e Econômica)
Comparação das configurações · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos IQ / OQ / PQ
Documentação de validação para conformidade GMP · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos FAT / SAT
Testes de aceitação na fábrica e no local · Documento original (inglês)
Solicitar à equipe de vendas
Desenhos CAD (STEP / IGES / DWG)
Desenhos de engenharia para a instalação · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de calibração
Nível sonoro, resistência de terra, rigidez dielétrica e rugosidade · Documento original (inglês)
Solicitar à equipe de vendas
DQ (qualificação do projeto)
Protocolo completo de qualificação do projeto · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de materiais
Composição do aço inoxidável 316L · Documento original (inglês)
Solicitar à equipe de vendas