Accueil / Équipements / Autoclave à vapeur pure / SED-0.8CM-J Pure Steam Sterilizer (Gas-Sealed Double-Leaf Motorized Doors)

SED-0.8CM-J

Sur devis

SED-0.8CM-J

SED · SED-0.8CM-J · En vedette

SED-0.8CM-J — SED-0.8CM-J Pure Steam Sterilizer

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-0.8CM-J pure steam sterilizer (autoclave) — gas-sealed, double-leaf motorized pass-through doors. Horizontal rectangular design with inner chamber 6 mm 316L stainless steel and jacket 6 mm 304 stainless steel. Confor

GB/T 150.1~4-2024 (Chinese steel pressure vessel code, Class I pressure vessel)GMP-compliant design

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

Saturated pure steam is used as the sterilization medium in the inner chamber. Jacket ordinary boiler steam preheats and maintains chamber wall temperature to prevent condensation-induced temperature drops. The double-leaf motorized doors are gas-sealed with medical-grade silicone gaskets. Door interlocks prevent opening while chamber is pressurized; steam admission is blocked unless doors are fully sealed. Temperature and pressure are monitored by Pt100 probes and HUBA sensors; cycle data are printed and recorded by a micro printer with EPSON chip.

Processus de fonctionnement

1Saturated pure steam is used as the sterilization medium in the inner chamber.

2Jacket ordinary boiler steam preheats and maintains chamber wall temperature to prevent condensation-induced temperature drops.

3The double-leaf motorized doors are gas-sealed with medical-grade silicone gaskets.

4Door interlocks prevent opening while chamber is pressurized; steam admission is blocked unless doors are fully sealed.

5Temperature and pressure are monitored by Pt100 probes and HUBA sensors; cycle data are printed and recorded by a micro printer with EPSON chip.

Caractéristiques techniques

Caractéristiques de la variante : SED-0.8CM-J

Caractéristiques

Modèle

SED-0.8CM-J

Tension

AC380V 50Hz, 3-phase 5-wire

Fluides et énergie

Drinking-grade pure water: 0.1–0.3 MPa, ~220 kg per cycle; Plant steam: 0.4–0.6 MPa, ~40 kg per cycle; Compressed air: 0.5–0.7 MPa; Electrical: AC380V / 50Hz, 3-phase 5-wire, 2.5 kW.

Détails de conformité

Designed and manufactured to GB/T 150.1~4-2024 (Class I pressure vessel). X-ray flaw inspection on all welds; full quality certificates supplied. Pressure vessel utility piping in 316L sanitary tubing with tri-clover connections.

Puissance

2.5 kW

Pression d’air

Working pressure 0.25 MPa; design pressure 0.3 MPa; ultimate vacuum -0.095 MPa

Dimensions

Longueur

1680 mm

Largeur

1400 mm

Hauteur

1920 mm

Poids

1400 kg

Emprise au sol

1680 × 1400 × 1920 mm (L×W×H), net weight 1400 kg. Pass-through configuration requires wall opening sized to outer envelope. Utilities entry: pure water 0.1–0.3 MPa, plant steam 0.4–0.6 MPa, compressed air 0.5–0.7 MPa, power 380V 2.5 kW.

Matériaux

Matériaux en contact

316L stainless steel (6 mm inner chamber, 8 mm door panels, sanitary tubing, sterilization cart and sterilization tray); medical-grade pharmaceutical-grade silicone gaskets

Matériaux du bâti

316L stainless steel (chamber); 304 stainless steel (jacket and outer panels)

Caractéristiques principales

Double-leaf motorized doors with safety + pressure interlocks (door cannot open while chamber pressurized; chamber cannot admit steam unless door sealed)

Inner chamber 6 mm 316L SS; jacket 6 mm 304 SS; door panels 8 mm 316L SS

Gas-sealed door with medical-grade pharmaceutical-grade silicone gasket, compressed-air automatic sealing

50 mm aluminum-silicate insulation; 1.2 mm 304 brushed-stainless decorative outer panels

Heat uniformity ≤ ±1 °C; ultimate vacuum -0.095 MPa

Working temperature 139 °C (design 144 °C); working pressure 0.25 MPa (design 0.3 MPa)

Two Pt100 temperature probes (chamber and in-load liquid) with dual temperature display

Real-time chart recorder + micro printer: pressure / temperature / time / F0 reports and trend charts

316L sanitary tubing on chamber utility lines; tri-clover quick-clamp connections

Pneumatic angle-seat valves on steam-trap line prevent reverse cross-contamination

X-ray weld inspection on all chamber welds with full quality certificates

Includes 1 × 316L sterilization cart + 2 × 304 transport carts

Designed to GMP, suitable for sterile pharmaceutical / biopharma manufacturing in B/C cleanrooms

Premium imported instrumentation: Siemens PLC, ASCO valves, GEMU valves, HUBA pressure transmitter, B+B Pt100 probes

316L sanitary contact surfaces and tri-clover connections meet pure-steam GMP requirements

Double-door pass-through enables clean/non-clean barrier separation

Custom sterilization programs available for biopharma processes

Applications

Sterilization of sterile garments, gowns and textiles

Sterilization of antibiotics and other heat-stable pharmaceuticals

Sterilization of filling rubber stoppers, aluminum caps and aluminum barrels

Small-volume open-container liquid sterilization

Sterilization of equipment / containers used in Class 100 (Grade A) filling areas

Secteurs

Pharmaceutical (sterile / injectable)

Biopharmaceutical

Medical devices

GMP B/C cleanroom operations

Marques des composants

Siemens Germany (S7-200 PLC)

ASCO USA (angle pneumatic valves, 4 million-cycle life)

GEMU Germany (diaphragm valves)

HUBA Switzerland (pressure transmitter)

B+B Germany (soft Pt100 temperature probes)

Ereith / Airuisi (hard Pt100 temperature probes)

Airtac Taiwan (solenoid valves)

Pingtong Taiwan (touch screen)

Weihuang Beijing (micro printer with EPSON chip)

Brady Beijing (pressure gauges)

Yulong Shanghai (water-ring vacuum pump)

Shatong Precision (0.22 μm sterile air filter)

Guangyi Zhejiang (safety valve, 0.1–0.3 MPa)

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

GB/T 150.1~4-2024 (Chinese steel pressure vessel code, Class I pressure vessel)

GMP-compliant design