Inicio / Equipos / Autoclave de vapor puro / SED-0.8CM-J Pure Steam Sterilizer (Gas-Sealed Double-Leaf Motorized Doors)
SED-0.8CM-J
Consultar
SED-0.8CM-J
SED · SED-0.8CM-J · Destacado
SED-0.8CM-J — SED-0.8CM-J Pure Steam Sterilizer
La descripción completa de este modelo aún se está traduciendo. Consulte los detalles en inglés o solicite información a nuestro equipo. English
SED-0.8CM-J pure steam sterilizer (autoclave) — gas-sealed, double-leaf motorized pass-through doors. Horizontal rectangular design with inner chamber 6 mm 316L stainless steel and jacket 6 mm 304 stainless steel. Confor
Plazo de entrega
Consultar
Capacidad de producción
Contáctenos
Funcionamiento
Saturated pure steam is used as the sterilization medium in the inner chamber. Jacket ordinary boiler steam preheats and maintains chamber wall temperature to prevent condensation-induced temperature drops. The double-leaf motorized doors are gas-sealed with medical-grade silicone gaskets. Door interlocks prevent opening while chamber is pressurized; steam admission is blocked unless doors are fully sealed. Temperature and pressure are monitored by Pt100 probes and HUBA sensors; cycle data are printed and recorded by a micro printer with EPSON chip.
Proceso de funcionamiento
1Saturated pure steam is used as the sterilization medium in the inner chamber.
2Jacket ordinary boiler steam preheats and maintains chamber wall temperature to prevent condensation-induced temperature drops.
3The double-leaf motorized doors are gas-sealed with medical-grade silicone gaskets.
4Door interlocks prevent opening while chamber is pressurized; steam admission is blocked unless doors are fully sealed.
5Temperature and pressure are monitored by Pt100 probes and HUBA sensors; cycle data are printed and recorded by a micro printer with EPSON chip.
Especificaciones técnicas
Especificaciones de la variante: SED-0.8CM-J
Especificaciones
Modelo
SED-0.8CM-J
Tensión
AC380V 50Hz, 3-phase 5-wire
Suministros
Drinking-grade pure water: 0.1–0.3 MPa, ~220 kg per cycle; Plant steam: 0.4–0.6 MPa, ~40 kg per cycle; Compressed air: 0.5–0.7 MPa; Electrical: AC380V / 50Hz, 3-phase 5-wire, 2.5 kW.
Detalles de conformidad
Designed and manufactured to GB/T 150.1~4-2024 (Class I pressure vessel). X-ray flaw inspection on all welds; full quality certificates supplied. Pressure vessel utility piping in 316L sanitary tubing with tri-clover connections.
Potencia
2.5 kW
Presión de aire
Working pressure 0.25 MPa; design pressure 0.3 MPa; ultimate vacuum -0.095 MPa
Dimensiones
Longitud
1680 mm
Anchura
1400 mm
Altura
1920 mm
Peso
1400 kg
Superficie de instalación
1680 × 1400 × 1920 mm (L×W×H), net weight 1400 kg. Pass-through configuration requires wall opening sized to outer envelope. Utilities entry: pure water 0.1–0.3 MPa, plant steam 0.4–0.6 MPa, compressed air 0.5–0.7 MPa, power 380V 2.5 kW.
Materiales
Materiales en contacto
316L stainless steel (6 mm inner chamber, 8 mm door panels, sanitary tubing, sterilization cart and sterilization tray); medical-grade pharmaceutical-grade silicone gaskets
Materiales del cuerpo
316L stainless steel (chamber); 304 stainless steel (jacket and outer panels)
Características principales
Double-leaf motorized doors with safety + pressure interlocks (door cannot open while chamber pressurized; chamber cannot admit steam unless door sealed)
Inner chamber 6 mm 316L SS; jacket 6 mm 304 SS; door panels 8 mm 316L SS
Gas-sealed door with medical-grade pharmaceutical-grade silicone gasket, compressed-air automatic sealing
50 mm aluminum-silicate insulation; 1.2 mm 304 brushed-stainless decorative outer panels
Heat uniformity ≤ ±1 °C; ultimate vacuum -0.095 MPa
Working temperature 139 °C (design 144 °C); working pressure 0.25 MPa (design 0.3 MPa)
Two Pt100 temperature probes (chamber and in-load liquid) with dual temperature display
Real-time chart recorder + micro printer: pressure / temperature / time / F0 reports and trend charts
316L sanitary tubing on chamber utility lines; tri-clover quick-clamp connections
Pneumatic angle-seat valves on steam-trap line prevent reverse cross-contamination
X-ray weld inspection on all chamber welds with full quality certificates
Includes 1 × 316L sterilization cart + 2 × 304 transport carts
Designed to GMP, suitable for sterile pharmaceutical / biopharma manufacturing in B/C cleanrooms
Premium imported instrumentation: Siemens PLC, ASCO valves, GEMU valves, HUBA pressure transmitter, B+B Pt100 probes
316L sanitary contact surfaces and tri-clover connections meet pure-steam GMP requirements
Double-door pass-through enables clean/non-clean barrier separation
Custom sterilization programs available for biopharma processes
Aplicaciones
Sterilization of sterile garments, gowns and textiles
Sterilization of antibiotics and other heat-stable pharmaceuticals
Sterilization of filling rubber stoppers, aluminum caps and aluminum barrels
Small-volume open-container liquid sterilization
Sterilization of equipment / containers used in Class 100 (Grade A) filling areas
Sectores
Pharmaceutical (sterile / injectable)
Biopharmaceutical
Medical devices
GMP B/C cleanroom operations
Marcas de componentes
Siemens Germany (S7-200 PLC)
ASCO USA (angle pneumatic valves, 4 million-cycle life)
GEMU Germany (diaphragm valves)
HUBA Switzerland (pressure transmitter)
B+B Germany (soft Pt100 temperature probes)
Ereith / Airuisi (hard Pt100 temperature probes)
Airtac Taiwan (solenoid valves)
Pingtong Taiwan (touch screen)
Weihuang Beijing (micro printer with EPSON chip)
Brady Beijing (pressure gauges)
Yulong Shanghai (water-ring vacuum pump)
Shatong Precision (0.22 μm sterile air filter)
Guangyi Zhejiang (safety valve, 0.1–0.3 MPa)
SED
Hable con SED Sales Team
Especialistas en equipos · contacto por WhatsApp
Consulte el horario y la disponibilidad del equipo
Conformidad
GB/T 150.1~4-2024 (Chinese steel pressure vessel code, Class I pressure vessel)
GMP-compliant design
Documentación
Ficha técnica (PDF)
Resumen del equipo, especificaciones y dimensiones · Documento original (inglés)
Solicitar al equipo comercial
Manual del operador
Instalación, funcionamiento y diagnóstico · Documento original (inglés)
Solicitar al equipo comercial
Ficha comparativa (Estándar y Económica)
Comparación de configuraciones · Documento original (inglés)
Solicitar al equipo comercial
Protocolos IQ / OQ / PQ
Documentación de validación para conformidad GMP · Documento original (inglés)
Solicitar al equipo comercial
Protocolos FAT / SAT
Pruebas de aceptación en fábrica y en sitio · Documento original (inglés)
Solicitar al equipo comercial
Planos CAD (STEP / IGES / DWG)
Planos de ingeniería para la instalación · Documento original (inglés)
Solicitar al equipo comercial
Certificados de calibración
Nivel sonoro, resistencia de tierra, rigidez dieléctrica y rugosidad · Documento original (inglés)
Solicitar al equipo comercial
DQ (cualificación del diseño)
Protocolo completo de cualificación del diseño · Documento original (inglés)
Solicitar al equipo comercial
Certificados de materiales
Composición del acero inoxidable 316L · Documento original (inglés)
Solicitar al equipo comercial