Accueil / Équipements / Alimenteur de gélules / Empty Capsule Feeder (Auxiliary Equipment for Capsule Filling Machine)

SED-30JS-H

Sur devis

SED · SED-30JS-H · 16 unités vendues

SED-30JS-H — Empty Capsule Feeder

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-30JS-H Empty Capsule Feeder conveys empty capsules from a floor-level container up to the hopper of a capsule filling machine via stainless-steel piping and a rotating air (whirling) pump. Capacity 200,000–300,000 ca

Suitable for GMP-relevant pharmaceutical environments (must be installed in dry, non-flammable area)

Choisir une variante (2)

Délai de livraison

Sur devis

Cadence

200000–300000 /

Fonctionnement

Operator presses the work start button; AC contactor KM engages and the whirling (rotary vane) air pump starts. The pump generates ~8 kPa pressure / 65 m³/h airflow that draws empty capsules from the floor-level container through a stainless-steel pipe up to the destination hopper on the capsule filling machine. A capsule level sensor at the top of the destination hopper detects when capsules reach the preset height; contactor KM opens and the air pump stops. As production consumes capsules and the level drops below the sensor, timing relay KT triggers a short delay then restarts the pump. The cycle repeats automatically until the source container is empty or operator stops the feeder. Note: timing relay delay should be adjusted to match production speed.

Processus de fonctionnement

1Operator presses the work start button; AC contactor KM engages and the whirling (rotary vane) air pump starts.

2The pump generates ~8 kPa pressure / 65 m³/h airflow that draws empty capsules from the floor-level container through a stainless-steel pipe up to the destination hopper on the capsule filling machine.

3A capsule level sensor at the top of the destination hopper detects when capsules reach the preset height; contactor KM opens and the air pump stops.

4As production consumes capsules and the level drops below the sensor, timing relay KT triggers a short delay then restarts the pump.

5The cycle repeats automatically until the source container is empty or operator stops the feeder.

6Note: timing relay delay should be adjusted to match production speed.

Caractéristiques techniques

Caractéristiques de la variante : SED-30JS-H 200

Caractéristiques

Modèle

SED-30JS-H

Cadence

200000–300000 /

Tension

380V 50Hz 3-Phase

Fluides et énergie

AC 380V/50Hz three-phase electric supply (0.55 kW); no external compressed air; dry, non-flammable installation area.

Détails de conformité

Designed for GMP-relevant capsule production environments; must be installed in a dry location away from flammable/explosive atmospheres.

Puissance

0.55 kW

Pression d’air

Internal pump output ~8 kPa @ 65 m³/h (no external compressed air required)

Dimensions

Longueur

850 mm

Largeur

430 mm

Hauteur

2200 mm

Poids

63 kg

Emprise au sol

850 mm (L) x 430 mm (W) base x 2200 mm (H, adjustable); place near filler hopper inlet with capsule source container at ground level.

Matériaux

Matériaux en contact

Stainless steel conveying pipe

Matériaux du bâti

Painted steel base and motor enclosure; stainless steel pipework

Alimentation électrique

Phase

triphasé

Fonctionnement

Reference Transport Distance

5 m (horizontal + vertical) m

Caractéristiques principales

Pneumatic conveying — gentle on capsules, no mechanical agitation

Capacity 200,000–300,000 capsules/h over 5 m total run (horizontal + vertical); doubling distance halves capacity

Automatic start/stop on hopper level sensor

Adjustable timing relay delay matches restart cadence to production speed

Whirling rotary-vane air pump — 8 kPa, 65 m³/h; quiet and reliable

Stainless steel conveying pipe

Adjustable height (default 2200 mm) to match customer hopper height

Mobile — 63 kg lightweight design

380V three-phase, 0.55 kW

Continuous-duty operation

Air intake hole must be unobstructed; blocked inlet reverses motor direction

Eliminates manual capsule loading — operator can attend other tasks

Sensor-based start/stop prevents hopper overflow and idle running

Pneumatic gentleness avoids capsule shell damage

Pairs natively with SED-BJ-III, SED-BJ-III-H, and SED-1200J-H capsule filling machines

Mobile lightweight design — one feeder can serve multiple fillers in shift rotation

Stainless steel piping suits cleanroom and GMP environments

Adjustable height accommodates different filler hopper heights

Applications

Conveying empty hard gelatin capsules to capsule filler hoppers

Conveying HPMC (vegetable) capsules to fillers

Continuous capsule supply for SED-BJ-III, SED-BJ-III-H, SED-1200J-H production lines

Replacing manual capsule loading in SME pharma plants

Secteurs

Fabrication pharmaceutique

Compléments alimentaires et nutraceutiques

Médecine vétérinaire

Façonniers de remplissage de gélules

Marques des composants

AC contactor KM

Timing relay KT

Whirling rotary-vane air pump (8 kPa, 65 m³/h)

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

Suitable for GMP-relevant pharmaceutical environments (must be installed in dry, non-flammable area)

Nettoyage et entretien

Before each shift, verify the air intake hole is clear (if blocked, motor rotation direction may be reversed and must be adjusted). Insert and fix the stainless steel pipe firmly into the air hole. Wipe down the conveying pipe between SKU changes. Ensure the level sensor is clean. Adjust the timing relay delay to match production speed for optimal restart cadence.