SED-30JS-H — Empty Capsule Feeder
La descripción completa de este modelo aún se está traduciendo. Consulte los detalles en inglés o solicite información a nuestro equipo. English
SED-30JS-H Empty Capsule Feeder conveys empty capsules from a floor-level container up to the hopper of a capsule filling machine via stainless-steel piping and a rotating air (whirling) pump. Capacity 200,000–300,000 ca
Funcionamiento
Operator presses the work start button; AC contactor KM engages and the whirling (rotary vane) air pump starts. The pump generates ~8 kPa pressure / 65 m³/h airflow that draws empty capsules from the floor-level container through a stainless-steel pipe up to the destination hopper on the capsule filling machine. A capsule level sensor at the top of the destination hopper detects when capsules reach the preset height; contactor KM opens and the air pump stops. As production consumes capsules and the level drops below the sensor, timing relay KT triggers a short delay then restarts the pump. The cycle repeats automatically until the source container is empty or operator stops the feeder. Note: timing relay delay should be adjusted to match production speed.
Especificaciones técnicas
Especificaciones
Dimensiones
Materiales
Electricidad
Funcionamiento
Características principales
Aplicaciones
Sectores
Marcas de componentes
Conformidad
Limpieza y mantenimiento
Before each shift, verify the air intake hole is clear (if blocked, motor rotation direction may be reversed and must be adjusted). Insert and fix the stainless steel pipe firmly into the air hole. Wipe down the conveying pipe between SKU changes. Ensure the level sensor is clean. Adjust the timing relay delay to match production speed for optimal restart cadence.