Accueil / Équipements / Conditionneuse blister moyenne/grande à plateaux pour solides (P, 250–500mm) / Machine de conditionnement en plaquettes alvéolées

SED-250P-R

Sur devis

SED-250P-R

SED · SED-250P-R · En vedette

SED-250P-R — Machine de conditionnement en plaquettes alvéolées

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-250P-R is a GMP/cGMP-compliant, CE/ISO 9001:2000-certified flat-bed blister packaging machine for ALU-PVC and ALU-ALU (cold-form aluminum) blister packaging — one machine, two uses via mold change. Conforms to Chines

GMPcGMPISO 9001:2000CEYYTO-2008

Choisir une variante (2)

Délai de livraison

Sur devis

Cadence

15–40 cycles/min

Fonctionnement

PVC sheet is heated by upper/lower heating plates (with offset connectors for uniform temperature distribution), then thermoformed by positive-pressure air into rigid blisters. Products are filled in the dedicated filling zone (approx. 1.6 m, isolated from heat sources). PTP aluminum foil is heat-sealed over the blisters using a pressurized cylinder. Batch numbers are embossed and tear lines pressed at a dedicated station. Servo motor drives the traction with digitally adjustable stroke via touch-screen. Each station uses an encoder (replacing proximity switches) for precise angular position control. Die-cutting uses a push-plate device to eject finished packs onto the conveyor. For ALU-ALU cold forming, the forming mold is changed to cold-form aluminum foil. Cam stations share a coaxial drive, eliminating gear-driven noise and backlash.

Processus de fonctionnement

1PVC sheet is heated by upper/lower heating plates (with offset connectors for uniform temperature distribution), then thermoformed by positive-pressure air into rigid blisters.

2Products are filled in the dedicated filling zone (approx.

31.6 m, isolated from heat sources).

4PTP aluminum foil is heat-sealed over the blisters using a pressurized cylinder.

5Batch numbers are embossed and tear lines pressed at a dedicated station.

6Servo motor drives the traction with digitally adjustable stroke via touch-screen.

7Each station uses an encoder (replacing proximity switches) for precise angular position control.

8Die-cutting uses a push-plate device to eject finished packs onto the conveyor.

9For ALU-ALU cold forming, the forming mold is changed to cold-form aluminum foil.

10Cam stations share a coaxial drive, eliminating gear-driven noise and backlash.

Caractéristiques techniques

Caractéristiques de la variante : ALU-PVC configuration standard

Caractéristiques

Modèle

SED-250P-R

Cadence

15–40 cycles/min

Tension

380V/50Hz

Fluides et énergie

Compressed air 0.5-0.7 MPa, ≥0.22 m³/h; tap water or circulating water (mold cooling)

Puissance

7.5 kW

Pression d’air

0.5-0.7 MPa, ≥0.22 m³/h

Dimensions

Longueur

4200 mm

Largeur

650 mm

Hauteur

1640 mm

Poids

1500 kg

Emprise au sol

4200 × 650 mm floor area (L × W); machine height 1640 mm

Matériaux

Matériaux en contact

SUS316 stainless steel (all drug-contact parts including feeder)

Matériaux du bâti

Carbon steel + aluminum alloy (hard anodized, HV400+) primary frame; SUS304 outer shell; SUS316 feeder

Caractéristiques principales

ALU-PVC and ALU-ALU dual-mode blister packaging machine (one machine, two uses via mold change)

GMP/cGMP compliant; ISO 9001:2000 and CE certified; YYTO-2008 standard

Punch frequency: 15-40 cycles/min (ALU-PVC); max. forming area 250×130×28 mm

Servo motor traction with digital stroke adjustment via touch-screen (Siemens)

Modular split-body design (3 sections) for entry into finished clean rooms

Quick-change molds (lateral extraction) for forming, heat sealing, and batch number stations

All drug-contact parts in SUS316 stainless steel; outer shell SUS304; frame carbon steel + hard-anodized aluminum alloy (HV400+)

Isolated loading zone (~1.6 m, no heat sources) for GMP compliance

Vision/camera waste-rejection system (optional) and mechanical waste-rejection (optional)

Pressurized cylinder on heat-sealing upper mold to reduce wear; mold lifts on stop to protect product

Encoder-based position control replaces proximity switches for higher precision (0.1 mm)

Coaxial cam drive for all stations — no gear noise or backlash

Alarm functions: material exhausted, over-temperature, low air pressure, motor overload, machine overload

Two-level password (operator / engineering)

Quality: ≥98% appearance pass rate, ≥99% sealing pass rate, ≥99% filling pass rate

Single machine handles both ALU-PVC and ALU-ALU packaging with mold change only

Siemens PLC (S7-200 SMART) and Siemens touch-screen for stable, low-failure-rate operation

Hard-anodized aluminum alloy (HV400+) for high durability — widely used in aerospace applications

GMP/cGMP compliant with full documentation (validation files, DQ/IQ/OQ/PQ documents supplied)

48-hour on-site service response; lifetime maintenance and upgrade service

Applications

Western medicine tablets and capsules

Traditional Chinese medicine pills (honey pills, herbal pills)

Médecine vétérinaire

Sugar-coated tablets

Candy and confectionery

Electronic components

Secteurs

Pharmaceutical (Western and TCM)

Vétérinaire

Food and confectionery

Electronics

Marques des composants

Main PLC module (6ES7288-ST40) — Siemens (Germany)

Expansion module (6ES7288-DT08) — Siemens (Germany)

Temperature module (6ES7288-AT04) — Siemens (Germany)

Inverter (MD200TI.5B) — Inovance (China)

Proximity switch (TL-Q5MC1) — Omron (Japan)

Encoder (E6B2-CW5C 360P/R) — Omron (Japan)

Small relay (MY2NJ) — Omron (Japan)

Touchscreen (6AV6648-0CC11) — Siemens (Germany)

Power switch (C10024) — Omron (Japan)

Solenoid valve (4V210-08) — AirTAC (Taiwan)

Air filter regulator (TW3000-03) — AirTAC (Taiwan)

Air switch / breaker (NXB-63) — CHNT (China)

Solid-state relay (220D25) — Zhongmei Langning (China)

Servo driver (IS620PS2R81-C) — Inovance (China)

Servo motor (ISMH1-40B30CB-U231Z) — Inovance (China)

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

GMP

cGMP

ISO 9001:2000

YYTO-2008

Nettoyage et entretien

Safety covers on all stations for visibility and protection. All molds and pneumatic tubing individually numbered for traceability. Clean machine surfaces with damp cloth; cam lubrication box sealed in stainless steel. Refer to equipment GMP cleaning and maintenance SOP supplied with machine.