Accueil / Équipements / Autoclave à vide pulsé / Pulsating Vacuum Sterilizer (Autoclave) – SED-0.5MM-J

SED-0.5MM-J

Sur devis

SED-0.5MM-J

SED · SED-0.5MM-J · En vedette

SED-0.5MM-J

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-0.5MM-J Pulsating Vacuum Sterilizer (Pulsating Vacuum Autoclave) – a horizontal double-layer, airtight-sealed, double-leaf motorized-door sterilizer for pharmaceutical and hospital use. Inner chamber (SS316L, 6 mm) d

Designed and manufactured to GMP standard with standard GMP validation interfaceGB150-2011 (Steel Pressure Vessel) compliantX-ray flaw-detection inspection with quality certificates from labor authority

Choisir une variante (1)

Délai de livraison

Sur devis

Cadence

500 L/h

Fonctionnement

Pulsating-vacuum saturated-steam sterilization. The horizontal double-layer chamber (SS316L inner vessel, SS304 fully-enclosed jacket) uses pulsating vacuum exhaust to eliminate residual cold air, ensuring temperature uniformity throughout the load. Saturated steam at 0.4–0.6 MPa (working: 0.22 MPa / 134 °C) is then admitted; the steam's latent heat condenses on the sterilized items, raising them to sterilization temperature. After the sterilization hold time, vacuum drying combined with jacket heating dries the load. Process flow: Auto Preparation → Pulsating Vacuum → Heat-Up → Sterilization → Drying → End. All parameters are monitored and recorded in real time by Siemens PLC; sterilization reports (pressure, temperature, time, F0 value) are printed by the micro printer.

Processus de fonctionnement

1Pulsating-vacuum saturated-steam sterilization.

2The horizontal double-layer chamber (SS316L inner vessel, SS304 fully-enclosed jacket) uses pulsating vacuum exhaust to eliminate residual cold air, ensuring temperature uniformity throughout the load.

3Saturated steam at 0.4–0.6 MPa (working: 0.22 MPa / 134 °C) is then admitted; the steam's latent heat condenses on the sterilized items, raising them to sterilization temperature.

4After the sterilization hold time, vacuum drying combined with jacket heating dries the load.

5Process flow: Auto Preparation → Pulsating Vacuum → Heat-Up → Sterilization → Drying → End.

6All parameters are monitored and recorded in real time by Siemens PLC; sterilization reports (pressure, temperature, time, F0 value) are printed by the micro printer.

Caractéristiques techniques

Caractéristiques de la variante : SED-0 chamber 870 × 680 × 850 mm

Caractéristiques

Modèle

SED-0.5MM-J

Cadence

500 L/h

Tension

AC 380 V, 50 Hz, 3-phase 5-wire

Fluides et énergie

Electrical: AC 380 V, 50 Hz, 3-phase 5-wire, 2.5 kWh/cycle. Saturated steam 0.4–0.6 MPa, ~35 kg/cycle. Drinking water / pure water 0.1–0.3 MPa, ~200 kg/cycle. Compressed air 0.5–0.7 MPa for door sealing and pneumatic valves.

Détails de conformité

Strictly designed and manufactured to pharmaceutical GMP standard with a standard GMP validation interface (real-time output and archive of sterilization records including pressure, temperature, time, and F0 value). Pressure vessel complies with GB150-2011; X-ray flaw-detected with complete quality certificates. Door safety interlocks fully comply with pressure-vessel safety-interlock standards.

Puissance

2.5 kW

Pression d’air

Compressed air 0.5~0.7 MPa; saturated steam 0.4~0.6 MPa; water 0.1~0.3 MPa; ultimate vacuum -0.095 MPa

Dimensions

Longueur

1150 mm

Largeur

1400 mm

Hauteur

1920 mm

Poids

1200 kg

Emprise au sol

Overall 1 150 (L) × 1 400 (W) × 1 920 (H) mm; net weight 1 200 kg. Inner chamber 870 × 680 × 850 mm. Pass-through double-leaf design – install in wall between sterile and non-sterile rooms.

Matériaux

Matériaux en contact

SS316L inner chamber (6 mm) and door board (8 mm); SS304 door rack (sawtooth); SS304 sieve plate; SS304 sanitary-grade piping and weld fittings; medical silicone-rubber door gasket

Matériaux du bâti

SS316L inner chamber – SS304 fully-enclosed jacket – SS304 1.2 mm oil-mill drawn outer decorative cover – 50 mm aluminum-silicate insulation

Caractéristiques principales

Double-leaf motorized doors with airtight compressed-air-actuated medical silicone gasket

Door interlocks: operating area / sterile area separation; no steam admitted until sealed; no opening while chamber is pressurized

SS316L inner chamber (6 mm); SS304 door board (8 mm); SS304 sieve plate

50 mm aluminum-silicate insulating layer – minimizes heat radiation and conduction

SS304 1.2 mm oil-mill drawn outer decorative cover – durable and easy to clean

Siemens S7-200 PLC – 50 000-hour MTBF; full-process pressure and temperature auto-control

Taiwan TRE touch screen – bilingual, curve printing, electronic signature, administrator privileges

Beijing Weihuang micro printer (original EPSON chip) – sterilization report + temperature trend chart

ASCO USA / Burkert Germany angle-seat pneumatic valves – 4-million-cycle operating life

Shanghai Yulong water-ring vacuum pump – low noise, high vacuum

Jiangsu Santong air filter – filtration precision ≤ 0.22 μm (sterile filtration)

Taiwan Airtac solenoid valves – reliable, long service life

Switzerland HUBA pressure transmitter – high-precision, anti-interference

Iris PT100 temperature probe – Grade A accuracy, error ≤ 0.15 °C

Dual temperature channel monitoring and data storage in chamber

GMP validation interface with real-time sterilization record output and archive

Strictly GMP-compliant design with standard validation interface – supports regulatory audit

SS316L inner chamber + SS304 jacket – superior corrosion resistance for demanding sterilization cycles

Premium imported components (Siemens, ASCO, Burkert, HUBA) – validated reliability

Pass-through double-leaf door design – enables clean-room integration and batch traceability

Pulsating vacuum ensures complete cold-air removal – guaranteed temperature uniformity ≤ ±1 °C

Modular options: 36 kW clean-steam generator + 500 L/h water softener available as package

Full-cycle automation with electronic record archiving – reduces manual error and labor cost

Applications

Saturated-steam sterilization of clothing and dressings

Sterilization of metal medical/surgical instruments

Culture-medium sterilization

Glassware sterilization

Bowie & Dick / vacuum leak test

Pharmaceutical manufacturing sterilization cycles

Secteurs

Hospitals

Fabrication pharmaceutique

Health authorities and research institutes

Medical device sterilization

Marques des composants

SIEMENS Germany – S7-200 PLC

TRE Taiwan – touch screen

Beijing Weihuang (BRIGHTEK) – micro printer (original EPSON chip)

ASCO USA / Burkert Germany – angle-seat pneumatic valves

Shanghai Yulong – water-ring vacuum pump

Jiangsu Santong – air filter (≤ 0.22 μm)

Taiwan Airtac – solenoid valves

Zhongzhi CIS – steam trap

Beijing Brady – pressure gauge

Zhejiang Guangyi – safety valve

Switzerland HUBA – pressure transmitter

Iris – PT100 temperature probe (Grade A, ≤ 0.15 °C error)

JRPM – paperless recorder

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

Designed and manufactured to GMP standard with standard GMP validation interface

GB150-2011 (Steel Pressure Vessel) compliant

X-ray flaw-detection inspection with quality certificates from labor authority

Nettoyage et entretien

Sterilization chamber inner surface receives precision mechanical and chemical finishing for corrosion resistance and easy cleaning. Outer SS304 1.2 mm oil-mill drawn cover wipes clean. Sanitary-grade clamp-connection piping has no crevices – easy to inspect and clean. SS304 sieve plate is removable for cleaning.