Accueil / Équipements / Autoclave à vide pulsé / Autoclave à vide pulsé

SED-0.15MM-A

Sur devis

SED-0.15MM-A

SED · SED-0.15MM-A · En vedette

SED-0.15MM-A — Autoclave à vide pulsé

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

The SED-0.15MM-A Pulsating Vacuum Autoclave is designed and manufactured in strict accordance with GMP technical standards, certified to ISO 9001 and ISO 13485, and compliant with China Pressure Equipment Directive GB 15

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

Pulsating vacuum: the water-ring vacuum pump evacuates the chamber multiple times (pulses) before steam injection to thoroughly displace cold air. Steam enters the chamber, condenses, and releases latent heat to achieve sterilization. During steam injection and sterilization, the water-ring pump continuously aspirates through an adjustable intake and drains condensate through a small-section valve, maintaining dynamic conditions that ensure uniform temperature distribution and prevent accumulation of condensate or non-condensable gases. Post-sterilization vacuum drying removes residual moisture. A PALL 0.22 µm absolute-retention air filter ensures sterile air for pressure compensation.

Processus de fonctionnement

1Pulsating vacuum: the water-ring vacuum pump evacuates the chamber multiple times (pulses) before steam injection to thoroughly displace cold air.

2Steam enters the chamber, condenses, and releases latent heat to achieve sterilization.

3During steam injection and sterilization, the water-ring pump continuously aspirates through an adjustable intake and drains condensate through a small-section valve, maintaining dynamic conditions that ensure uniform temperature distribution and prevent accumulation of condensate or non-condensable gases.

4Post-sterilization vacuum drying removes residual moisture.

5A PALL 0.22 µm absolute-retention air filter ensures sterile air for pressure compensation.

Caractéristiques techniques

Caractéristiques de la variante : SED-0.15MM-A

Caractéristiques

Modèle

SED-0.15MM-A

Tension

380V 50Hz

Fluides et énergie

Power: 380V 50Hz 3-phase 4-wire (1.0 kW control + 18 kW heating); Pure water: DN25, 0.2–0.3 MPa, 15 kg/cycle; Tap water: DN25, 0.2–0.3 MPa, 80 kg/cycle; Compressed air: Φ6 mm, 0.6–0.8 MPa, 0.1 m³/cycle

Détails de conformité

Compliant with GMP, ISO 9001, ISO 13485; compliant with China Pressure Equipment Directive GB 150. Safety valve set pressure 0.1–0.3 MPa (SUS304). Dual electromechanical and electronic safety interlocks.

Puissance

19 kW

Pression d’air

0.6-0.8 MPa

Dimensions

Longueur

1002 mm

Largeur

1140 mm

Hauteur

1750 mm

Matériaux

Matériaux en contact

SUS304 stainless steel (inner chamber 6 mm, X-ray inspected); Medical-grade silicone rubber (door seal)

Matériaux du bâti

SUS304 stainless steel (jacket and casing)

Caractéristiques principales

Chamber 800×400×480 mm, rectangular SUS304 6 mm plate, X-ray inspected

Overall dimensions 1002×1140×1750 mm

Working temperature 100–134°C; temperature uniformity ≤±1°C (PT100 Class-A ≤0.15°C)

Working pressure 0.22 MPa; design pressure 0.245 MPa

Timer setting 0–999 min adjustable

Double-door pass-through with interlock; hinge type + automatic pneumatic locking

Inflatable silicone door gasket (supply pressure 0.6–0.8 MPa; withstands chamber temp/pressure; no gas leaks to chamber)

Power supply 380V 50Hz 3-phase 4-wire 1.0 kW; heating power 18 kW

2× PT100 sensors (1 movable inside chamber + 1 fixed at drain port)

Pneumatic valves GEMU (Germany), single-seal, rated for 4 million cycles

PALL air filter 0.22 µm absolute retention

Water-ring vacuum pump

PLC Siemens S7-200 (Germany) + touchscreen TIANREN TP207 + micro-printer BRIGHTEK (Beijing)

3-level password: Administrator / Engineer / Operator

Safety interlocks: door cannot open unless gasket fully discharged and chamber safe

Compliant with GMP, ISO 9001, ISO 13485, GB 150 (China Pressure Vessel Directive)

Pulsating vacuum ensures thorough sterilization of deep porous loads and wrapped items

Double-door pass-through for clean/dirty zone separation (GMP-compliant)

Inflatable silicone door gasket requires no periodic lubrication or maintenance

International-grade components: Siemens PLC, JUMO temperature sensors, DANFOSS pressure transmitter

3-level password access control for GMP compliance

Applications

Dressings, cotton, fabric sterilization (porous loads)

Metal instruments and glassware sterilization

Culture media sterilization

Vacuum drying

Bowie & Dick test / vacuum leak test

Secteurs

Hospital / CSSD

Pharmaceutique

Research institutes

Biotechnology

Laboratoire

Marques des composants

PLC: Siemens S7-200 (Germany)

Touchscreen: TIANREN TP207 (China)

Micro-printer: BRIGHTEK WH Series (Beijing)

Temperature sensor: JUMO PT100 902350/22 + 902810/13 (Germany), Class A, equilibrium ≤0.15°C

Pressure transmitter: DANFOSS MBS-1900 (Denmark)

Pressure controller: SNS Series (Tokyo, Japan)

Solenoid valve: AIRTAK 3V1-06 (China)

Pneumatic angle-seat valve: GEMU APL Series (Germany), 4 million cycle rated

Water-ring vacuum pump: SK Series, YUHUAN (China)

Air filter: SANTONG FA Series + PALL 0.22 µm

Pressure gauge: BLD YTF-98ZK (China)

Safety valve: GUANGYI A28-16P SUS304 (China), set 0.1–0.3 MPa

Door on/off: CoRon CLJ Series (China)

Door seal: RUNDE medical-grade silicone rubber

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →