Início / Equipamentos / Embaladora automática com filme / Fully Automatic Sleeve-Type Heat-Shrink Wrapping Line
SED-TMJ-Y
Consultar
SED-TMJ-Y
SED · SED-TMJ-Y · Em destaque
SED-TMJ-Y — Fully Automatic Sleeve-Type Heat-Shrink Wrapping Line
A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English
SED-TMJ-Y is a fully automatic sleeve-type heat-shrink wrapping line — sleeve sealer plus shrink tunnel — designed for tray-less collation of single bottles or packs. It runs the full chain of conveying, bottle alignment
Escolher variante (1)
Prazo de entrega
Consultar
Capacidade de produção
8–12 /
Como funciona
Bottles arrive on the infeed conveyor, are aligned into the chosen pack pattern (6/9/12/15/18/20/24), then wrapped with PE film fed through a photoelectric-controlled feeder. The sleeve sealing knife — steel with a Teflon coating — performs a constant-temperature heat seal followed by a rapid cooling structure that locks the seal. The collation transfers into the shrink tunnel (1500 mm long, 700×500 mm mouth) where two centrifugal hot-air loops circulate heat across the pack inside a 3-layer insulated chamber, shrinking the PE film tightly. A reinforced cooling/setting channel hardens the wrap before the pack exits at the 850–950 mm discharge height.
Processo de funcionamento
1Bottles arrive on the infeed conveyor, are aligned into the chosen pack pattern (6/9/12/15/18/20/24), then wrapped with PE film fed through a photoelectric-controlled feeder.
2The sleeve sealing knife — steel with a Teflon coating — performs a constant-temperature heat seal followed by a rapid cooling structure that locks the seal.
3The collation transfers into the shrink tunnel (1500 mm long, 700×500 mm mouth) where two centrifugal hot-air loops circulate heat across the pack inside a 3-layer insulated chamber, shrinking the PE film tightly.
4A reinforced cooling/setting channel hardens the wrap before the pack exits at the 850–950 mm discharge height.
Especificações técnicas
Especificações da variante: Sealer + shrink tunnel as a matched line
Especificações
Modelo
SED-TMJ-Y
Capacidade de produção
8–12 /
Tensão
380V/50-60Hz, 3-phase
Utilidades
3-phase 380 V 50/60 Hz, total connected load 20.5 kW. Compressed air ≤0.5 MPa (≈5 bar). PE film: max roll 800 mm wide, 280 mm outer diameter.
Potência
20.5 kW
Pressão de ar
≤0.5 MPa (5 bar)
Dimensões
Área de instalação
Sealer + shrink tunnel inline. Shrink tunnel body 1500 mm long with 700×500 mm tunnel mouth; discharge conveyor at 850–950 mm working height. Maximum pack size 500×400×320 mm. Plan for an in-line floor length of ~5 m end-to-end.
Materiais
Materiais de contato
PE shrink film; Teflon-coated steel sealing knife; high-temperature silicone sleeve rollers or Teflon mesh belt in the shrink tunnel
Materiais do corpo
Painted carbon-steel main frame
Características principais
Fully automatic sequence: infeed conveying, bottle alignment, film wrapping, seal-cut, shrink tunnel, cool-set
Constant-temperature film welding for clean, high-strength seals
Rapid post-seal cooling structure preserves seal strength at line speed
Siemens PLC + Siemens HMI for stable cycle control
Imported guide-rod pneumatic cylinders for precise, durable motion
Photoelectric film-feed control reduces film consumption and waste
All conveyors VFD-driven for smooth, jam-free transport
Twin centrifugal hot-air loops in the shrink tunnel — even heat balance
Three-layer tunnel insulation — fast warm-up, lower energy use
Reinforced cooling/setting channel hardens pack quickly for storage and transport
Single-machine multi-format support (6/9/12/15/18/20/24 packs)
Maximum pack size 500×400×320 mm; shrink tunnel mouth 700×500 mm
Conveyor chain: high-temperature silicone sleeve rollers or Teflon mesh belt (depending on product)
Tray-less collation eliminates carton/tray cost for high-volume beverage packs
Branded automation stack (Siemens, Schneider, SICK, Omron, AirTAC) for predictable maintenance
Fast pack-pattern changeover supports SKU-rich beverage operations
Twin hot-air loops + 3-layer insulation cut energy and improve shrink uniformity
Imported guide-rod cylinders extend mean time between pneumatic service intervals
Reinforced cool-set channel — packs are stack-ready as they exit the line
Aplicações
Beer multi-pack shrink bundling
Carbonated and still beverage shrink wrapping
Bottled water bundle packing
Juice bottle collation
Dairy product (yogurt drink, milk) bundling
Setores
Brewing
Beverage filling and bottling
Bottled water
Juice and dairy
Marcas dos componentes
PLC: Siemens
HMI touchscreen: Siemens
Temperature controller: Shangnan ×2
Photoelectric sensor: SICK
Relays: Schneider ×4
Micro-switch: Omron Japan
Pneumatic cylinders: AirTAC Taiwan ×2
Solenoid valves: AirTAC Taiwan ×2
Air combination valve: AirTAC Taiwan
Switching power supply: Schneider
Film conveyor motor: China-made ×2
Blower motor: China-made ×2
Conveyor motor: China-made ×2
Flame-retardant tape: Chuko Japan
SED
Fale com SED Sales Team
Especialistas em equipamentos · contato pelo WhatsApp
Consulte o horário e a disponibilidade da equipe
Documentação
Ficha técnica (PDF)
Visão geral do equipamento, especificações e dimensões · Documento original (inglês)
Solicitar à equipe de vendas
Manual do operador
Instalação, operação e diagnóstico · Documento original (inglês)
Solicitar à equipe de vendas
Folha comparativa (Padrão e Econômica)
Comparação das configurações · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos IQ / OQ / PQ
Documentação de validação para conformidade GMP · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos FAT / SAT
Testes de aceitação na fábrica e no local · Documento original (inglês)
Solicitar à equipe de vendas
Desenhos CAD (STEP / IGES / DWG)
Desenhos de engenharia para a instalação · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de calibração
Nível sonoro, resistência de terra, rigidez dielétrica e rugosidade · Documento original (inglês)
Solicitar à equipe de vendas
DQ (qualificação do projeto)
Protocolo completo de qualificação do projeto · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de materiais
Composição do aço inoxidável 316L · Documento original (inglês)
Solicitar à equipe de vendas