Accueil / Équipements / Emballeuse automatique sous film / Fully Automatic Sleeve-Type Heat-Shrink Wrapping Line

SED-TMJ-Y

Sur devis

SED-TMJ-Y

SED · SED-TMJ-Y · En vedette

SED-TMJ-Y — Fully Automatic Sleeve-Type Heat-Shrink Wrapping Line

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-TMJ-Y is a fully automatic sleeve-type heat-shrink wrapping line — sleeve sealer plus shrink tunnel — designed for tray-less collation of single bottles or packs. It runs the full chain of conveying, bottle alignment

Choisir une variante (1)

Délai de livraison

Sur devis

Cadence

8–12 /

Fonctionnement

Bottles arrive on the infeed conveyor, are aligned into the chosen pack pattern (6/9/12/15/18/20/24), then wrapped with PE film fed through a photoelectric-controlled feeder. The sleeve sealing knife — steel with a Teflon coating — performs a constant-temperature heat seal followed by a rapid cooling structure that locks the seal. The collation transfers into the shrink tunnel (1500 mm long, 700×500 mm mouth) where two centrifugal hot-air loops circulate heat across the pack inside a 3-layer insulated chamber, shrinking the PE film tightly. A reinforced cooling/setting channel hardens the wrap before the pack exits at the 850–950 mm discharge height.

Processus de fonctionnement

1Bottles arrive on the infeed conveyor, are aligned into the chosen pack pattern (6/9/12/15/18/20/24), then wrapped with PE film fed through a photoelectric-controlled feeder.

2The sleeve sealing knife — steel with a Teflon coating — performs a constant-temperature heat seal followed by a rapid cooling structure that locks the seal.

3The collation transfers into the shrink tunnel (1500 mm long, 700×500 mm mouth) where two centrifugal hot-air loops circulate heat across the pack inside a 3-layer insulated chamber, shrinking the PE film tightly.

4A reinforced cooling/setting channel hardens the wrap before the pack exits at the 850–950 mm discharge height.

Caractéristiques techniques

Caractéristiques de la variante : Sealer + shrink tunnel as a matched line

Caractéristiques

Modèle

SED-TMJ-Y

Cadence

8–12 /

Tension

380V/50-60Hz, 3-phase

Fluides et énergie

3-phase 380 V 50/60 Hz, total connected load 20.5 kW. Compressed air ≤0.5 MPa (≈5 bar). PE film: max roll 800 mm wide, 280 mm outer diameter.

Puissance

20.5 kW

Pression d’air

≤0.5 MPa (5 bar)

Dimensions

Emprise au sol

Sealer + shrink tunnel inline. Shrink tunnel body 1500 mm long with 700×500 mm tunnel mouth; discharge conveyor at 850–950 mm working height. Maximum pack size 500×400×320 mm. Plan for an in-line floor length of ~5 m end-to-end.

Matériaux

Matériaux en contact

PE shrink film; Teflon-coated steel sealing knife; high-temperature silicone sleeve rollers or Teflon mesh belt in the shrink tunnel

Matériaux du bâti

Painted carbon-steel main frame

Caractéristiques principales

Fully automatic sequence: infeed conveying, bottle alignment, film wrapping, seal-cut, shrink tunnel, cool-set

Constant-temperature film welding for clean, high-strength seals

Rapid post-seal cooling structure preserves seal strength at line speed

Siemens PLC + Siemens HMI for stable cycle control

Imported guide-rod pneumatic cylinders for precise, durable motion

Photoelectric film-feed control reduces film consumption and waste

All conveyors VFD-driven for smooth, jam-free transport

Twin centrifugal hot-air loops in the shrink tunnel — even heat balance

Three-layer tunnel insulation — fast warm-up, lower energy use

Reinforced cooling/setting channel hardens pack quickly for storage and transport

Single-machine multi-format support (6/9/12/15/18/20/24 packs)

Maximum pack size 500×400×320 mm; shrink tunnel mouth 700×500 mm

Conveyor chain: high-temperature silicone sleeve rollers or Teflon mesh belt (depending on product)

Tray-less collation eliminates carton/tray cost for high-volume beverage packs

Branded automation stack (Siemens, Schneider, SICK, Omron, AirTAC) for predictable maintenance

Fast pack-pattern changeover supports SKU-rich beverage operations

Twin hot-air loops + 3-layer insulation cut energy and improve shrink uniformity

Imported guide-rod cylinders extend mean time between pneumatic service intervals

Reinforced cool-set channel — packs are stack-ready as they exit the line

Applications

Beer multi-pack shrink bundling

Carbonated and still beverage shrink wrapping

Bottled water bundle packing

Juice bottle collation

Dairy product (yogurt drink, milk) bundling

Secteurs

Brewing

Beverage filling and bottling

Bottled water

Juice and dairy

Marques des composants

PLC: Siemens

HMI touchscreen: Siemens

Temperature controller: Shangnan ×2

Photoelectric sensor: SICK

Relays: Schneider ×4

Micro-switch: Omron Japan

Pneumatic cylinders: AirTAC Taiwan ×2

Solenoid valves: AirTAC Taiwan ×2

Air combination valve: AirTAC Taiwan

Switching power supply: Schneider

Film conveyor motor: China-made ×2

Blower motor: China-made ×2

Conveyor motor: China-made ×2

Flame-retardant tape: Chuko Japan

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →