Início / Equipamentos / Compressora de alta velocidade — ultracapacidade (≥46 estações) / High-Speed Tablet Press (Double Discharge, 83-Station)
SED-720-83GY-E
Consultar
SED-720-83GY-E
SED · SED-720-83GY-E · Em destaque
SED-720-83GY-E — High-Speed Tablet Press
A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English
SED-720-83GY-E is an automatic high-speed double-discharge rotary tablet press with 83 BB-tooling stations, dual force feeding and dual discharge chutes, two main and two pre-pressing systems each rated at 100 kN, and B&
Escolher variante (3)
Prazo de entrega
Consultar
Capacidade de produção
99600–298800 tablets/hour
Como funciona
Double-discharge rotary tablet press: turret rotates with 83 punch stations under BB tooling. In one turret revolution, the upper and lower punches complete two cycles of powder filling, dosing, pre-pressing, main pressing, and ejection (double output). Powder is force-fed by a 3-paddle two-layer impeller central feeder driven by a VFD-controlled motor. Pre-press and main-press rollers (250 mm diameter) apply up to 100 kN each. A TEDEA gravity sensor under the press roller centerline measures every punch's pressure; the PCC control servo-adjusts filling cam to keep tablet weight within ±2%. Servo motors and synchronous motors driven by 6 encoders set positions at 0.01 mm precision. Bilayer tablet pressing is achieved by changing one set of cam tracks.
Processo de funcionamento
1Double-discharge rotary tablet press: turret rotates with 83 punch stations under BB tooling.
2In one turret revolution, the upper and lower punches complete two cycles of powder filling, dosing, pre-pressing, main pressing, and ejection (double output).
3Powder is force-fed by a 3-paddle two-layer impeller central feeder driven by a VFD-controlled motor.
4Pre-press and main-press rollers (250 mm diameter) apply up to 100 kN each.
5A TEDEA gravity sensor under the press roller centerline measures every punch's pressure; the PCC control servo-adjusts filling cam to keep tablet weight within ±2%.
6Servo motors and synchronous motors driven by 6 encoders set positions at 0.01 mm precision.
7Bilayer tablet pressing is achieved by changing one set of cam tracks.
Especificações técnicas
Especificações da variante: SED-720-51GY-E (D tooling
Especificações
Modelo
SED-720-83GY-E
Capacidade de produção
99600–298800 tablets/hour
Utilidades
Three-phase 380 V 50 Hz electrical supply for 11 kW main motor and auxiliaries; compressed air for vacuum loader (0.45–0.55 MPa); dust extraction connection (700 m³/h capacity recommended); BIJUR-grade lubrication oil and grease.
Detalhes de conformidade
Smooth surfaces with no paint or electroplating in production area. Stainless steel for all product-contact parts. Electrical wires and drive devices separated from press area. Dust-proof and oil-proof seals on punch holes. 360° cleaning access.
Dimensões
Área de instalação
Main machine 1300 × 1300 × 2000 mm (height ~1981 mm with 4-pillar structure); control cabinet 890 × 510 × 1200 mm. Two Φ50 dust-collection adapters at the back. Auxiliaries: SED-3000CCQ-E industrial dust collector, SED-150CCQ-E upward tablet de-duster, SED-ZKSL-E vacuum loader.
Materiais
Materiais de contato
Stainless steel (turret, base board of feeding device, operation platform, tablet ejection chute, cabinet, safeguard doors); 2Cr13 stainless steel die table with laser quenching; Cr12MoV alloy tool steel dies; 6CrW2Si alloy tool steel punches.
Materiais do corpo
QT600-3 ductile iron upper and lower turret with nickel-phosphorus surface plating; HT-300 cast iron foundation board and roof board; QT450-10 ductile iron standing columns; 4-pillar structure with 140×140 mm columns; stainless steel safeguard doors.
Características principais
Double-discharge, double-press rotary design — 2 sets of pre-press + main press per revolution
83 BB-tooling stations (max tablet diameter 13 mm, highest station count in GY family)
Output 70,000–700,000 tablets/hour
Turret speed 8–80 rpm with VFD
Max main pressure 100 kN, max pre-press 100 kN
Max tablet diameter 13 mm; max length of irregular tablet 16 mm; die diameter Φ24 mm
Max filling depth 16 mm; tablet thickness 1–8 mm
Bilayer tablet capability via cam-track change
Servo-driven filling and pressure with 0.01 mm precision
B&R PCC control system, Siemens HMI touchscreen, English/Chinese menus
TEDEA gravity sensor for direct, accurate pressure detection
Auto tablet weight control (±2%) and waste-tablet rejection
No hydraulic pressing system — high-strength mechanical support avoids oil contamination
Dual BIJUR lubrication: oil for punches/dies/cam tracks, grease for bearings
3-paddle double-layer impeller central force feeder, VFD controlled
360° cleaning, GMP/FDA compliant stainless contact surfaces
Highest station count (83 BB stations) in the GY family — maximum throughput for small tablets
Double-discharge architecture roughly doubles throughput vs single-output rotary presses
Up to 700,000 tablets/hour capacity for very high-volume production
Direct-measurement TEDEA gravity sensor for superior pressure accuracy
No hydraulic pressing — eliminates oil leakage and cross-contamination risk
GMP-compliant stainless construction with 360° cleaning access
Aplicações
Very high-speed rotary pressing of small-diameter pharmaceutical tablets
Bilayer tablet pressing
Round and irregular shaped small tablet production
High-volume nutraceutical tabletting
Setores
Pharmaceutical (regulated GMP/FDA production)
Nutraceutical / health products
Veterinário
Marcas dos componentes
Touch screen: Siemens
I/O controller: Siemens
Frequency converter: ABB
Servo driver: Kinco
24 V power supply: MIWE
Relay: Weidmuller
Phase sequence relay: Siemens
Main switch: MOELLER
Oil lubrication pump: HERG (US BIJUR system)
Grease lubrication pump: HERG (US BIJUR system)
Main motor: WEIHAI TECHFULL 11 kW
Pressure sensor: TEDEA (Germany) gravity sensor
SED
Fale com SED Sales Team
Especialistas em equipamentos · contato pelo WhatsApp
Consulte o horário e a disponibilidade da equipe
Conformidade
GMP-compliant design
FDA-compliant material set
21 CFR Part 11 compliance available as option
Documentação
Ficha técnica (PDF)
Visão geral do equipamento, especificações e dimensões · Documento original (inglês)
Solicitar à equipe de vendas
Manual do operador
Instalação, operação e diagnóstico · Documento original (inglês)
Solicitar à equipe de vendas
Folha comparativa (Padrão e Econômica)
Comparação das configurações · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos IQ / OQ / PQ
Documentação de validação para conformidade GMP · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos FAT / SAT
Testes de aceitação na fábrica e no local · Documento original (inglês)
Solicitar à equipe de vendas
Desenhos CAD (STEP / IGES / DWG)
Desenhos de engenharia para a instalação · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de calibração
Nível sonoro, resistência de terra, rigidez dielétrica e rugosidade · Documento original (inglês)
Solicitar à equipe de vendas
DQ (qualificação do projeto)
Protocolo completo de qualificação do projeto · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de materiais
Composição do aço inoxidável 316L · Documento original (inglês)
Solicitar à equipe de vendas