Início / Equipamentos / Compressor de ar de parafuso com ímã permanente e VFD / Hankison-Series Rare-Earth Permanent-Magnet Variable-Frequency Screw Air Compressor

SED-7.5LKY-A

Consultar

SED · SED-7.5LKY-A · 2 unidades vendidas

SED-7.5LKY-A — Hankison-Series Rare-Earth Permanent-Magnet Variable-Frequency Screw Air Compressor

A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English

SED-7.5LKY-A Hankison-series rare-earth permanent-magnet variable-frequency screw air compressor. 7.5 kW, 380 V/50 Hz 3-phase. PM servo synchronous motor with VFD soft-start. Air-cooled; oil-injected (oil content ≤ 3 ppm

Air tank: pressure-vessel certificate + Ping An insurance (10-year warranty)

Escolher variante (3)

Prazo de entrega

Consultar

Capacidade de produção

1–1.2 m^3/min

Como funciona

A rare-earth PM synchronous motor drives twin screw rotors compressing ambient air drawn through the inlet filter and inlet valve. Lubricating/cooling oil is injected into the compression chamber to seal clearances and remove heat; the oil-air mixture passes into the oil-air separator where oil is separated and recirculated. The VFD modulates motor speed in real time to match actual air demand, eliminating unloaded running and reducing energy consumption by 15–40% vs fixed-speed compressors.

Processo de funcionamento

1A rare-earth PM synchronous motor drives twin screw rotors compressing ambient air drawn through the inlet filter and inlet valve.

2Lubricating/cooling oil is injected into the compression chamber to seal clearances and remove heat; the oil-air mixture passes into the oil-air separator where oil is separated and recirculated.

3The VFD modulates motor speed in real time to match actual air demand, eliminating unloaded running and reducing energy consumption by 15–40% vs fixed-speed compressors.

Especificações técnicas

Especificações da variante: SED-7 .5LKY-A Basic: 1.0 m³/min

Especificações

Modelo

SED-7.5LKY-A

Capacidade de produção

1–1.2 m^3/min

Tensão

380V/50Hz, 3-phase

Utilidades

380 V / 50 Hz / 3-phase power supply. Adequate ventilation: ambient temperature range -5°C to +45°C; auxiliary fan air volume rated 15–20% above total compressor air demand. Solid, level foundation. Minimum clearance from walls for maintenance access.

Detalhes de conformidade

Main-airend warranty 3-10 years (per tier); whole-machine warranty 1-4 years (per tier). Air receiver covered by Ping An insurance; 10-year tank warranty. Each unit ships with certificate, nameplate, safety valve, pressure gauge and water trap.

Potência

7.5 kW

Pressão de ar

8 bar discharge pressure

Dimensões

Área de instalação

Requires solid level concrete foundation. Maintain minimum clearance from walls and adjacent equipment for maintenance and cooling airflow. Cooling air inlet temperature -5°C to +45°C. Transport via forklift using designated lifting points; do not drag on ground.

Materiais

Materiais do corpo

Carbon-steel skid; air-cooled radiator; carbon-steel air receiver (4 mm wall)

Características principais

Permanent-magnet variable-frequency screw compressor

Rare-earth PM servo synchronous motor

VFD soft-start (no inrush current)

Three trim levels: Basic / Flagship / High-end

Air displacement 1.0 / 1.1 / 1.2 m³/min @ 8 bar (by trim)

7.5 kW, 380 V/50 Hz 3-phase

SKF airend and motor bearings (all trims)

Oil content ≤ 3 ppm

Air-cooled, direct-coupled

Energy saving 15–40% vs fixed-speed

Nationwide warranty coverage

Three trim levels let buyer match capacity, component spec, and warranty to budget

Up to 40% energy savings vs fixed-speed competitors (High-end trim)

Long airend warranty: 3 / 5 / 10 years across tiers — industry-leading assurance

Nationwide warranty service included

Aplicações

Plant compressed-air supply for blow-fill-seal, capping, blister, and packaging machines

Compressed air for pneumatic conveyors and process valves

General manufacturing tools and assembly-line utility air

Setores

Pharmaceutical (utility air)

Food & beverage (utility air)

Cosmetics / personal care manufacturing

Marcas dos componentes

SKF Sweden — airend bearings and motor bearings (all trims)

Basic: Hankison custom Boos airend; Zhongchen VFD; Chengzhen contactor; ODE solenoid valve (Italy); Deno pressure/temperature sensor; Chaoman air & oil-separator filter (Shanghai)

Flagship: Hankison custom airend; Zhongchen VFD; Schneider contactor (France); ODE solenoid valve (Italy); Oudeli pressure/temperature sensor (Germany); Shengfeima filter (Guangdong)

High-end: Hankison custom Hanchung airend; Veichi VFD; Schneider contactor; Danfoss solenoid valve (Denmark); Oudeli sensor (Germany); Apuda filter (top-10 brand)

SED

Fale com SED Sales Team

Especialistas em equipamentos · contato pelo WhatsApp

Consulte o horário e a disponibilidade da equipe

+86 139 5885 3738

Enviar e-mail Conversar no WhatsApp →Solicitar chamada de 30 minutos →

Conformidade

Air tank: pressure-vessel certificate + Ping An insurance (10-year warranty)

Limpeza e manutenção

Replace air intake filter cartridge after first 500 hours; thereafter every 1500 hours under normal conditions (shorten interval in dusty environments). Change compressor oil per maintenance schedule (interval depends on oil contamination and ambient humidity). Replace oil filter element and oil-air separator cartridge per scheduled intervals. Clean cooler fins if exhaust temperature rises excessively. Do not mix different lubricant brands or grades.

Documentação

Ficha técnica (PDF)

Visão geral do equipamento, especificações e dimensões · Documento original (inglês)

Solicitar à equipe de vendas

Manual do operador

Instalação, operação e diagnóstico · Documento original (inglês)

Solicitar à equipe de vendas

Folha comparativa (Padrão e Econômica)

Comparação das configurações · Documento original (inglês)

Solicitar à equipe de vendas

Protocolos IQ / OQ / PQ

Documentação de validação para conformidade GMP · Documento original (inglês)

Solicitar à equipe de vendas

Protocolos FAT / SAT

Testes de aceitação na fábrica e no local · Documento original (inglês)

Solicitar à equipe de vendas

Desenhos CAD (STEP / IGES / DWG)

Desenhos de engenharia para a instalação · Documento original (inglês)

Solicitar à equipe de vendas

Certificados de calibração

Nível sonoro, resistência de terra, rigidez dielétrica e rugosidade · Documento original (inglês)

Solicitar à equipe de vendas

DQ (qualificação do projeto)

Protocolo completo de qualificação do projeto · Documento original (inglês)

Solicitar à equipe de vendas

Certificados de materiais

Composição do aço inoxidável 316L · Documento original (inglês)

Solicitar à equipe de vendas