SED-60GJZ-C — High-Pressure Homogenizer
A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English
SED-60GJZ-C Laboratory High-Pressure Homogenizer. Single-plunger lab/pilot-series homogenizer for emulsions, dispersions and cell disruption. Pressure to 70 MPa (700 bar) interval / 56 MPa continual; 60 L/h rated flow; p
Como funciona
Pre-mixed product is drawn from the feed hopper through the three-joint valve into the pump cylinder by a single reciprocating plunger that pressurizes it to 56-70 MPa. The high-pressure stream then forces through an adjustable two-stage homogenizing valve (high then low pressure). Across the valve, sudden pressure drop, expansion, explosion, shear and high-speed impact subdivide droplets and particles to 0.01-2 µm (avg 1 µm), creating a stable emulsion or dispersion (or rupturing cells for biotech use). Recommended low-stage = 20% of high-stage for best dispersion and longer wear-part life.
Especificações técnicas
Especificações
Dimensões
Materiais
Características principais
Aplicações
Setores
Marcas dos componentes
Limpeza e manutenção
After each product, flush pump body with cleaning fluid or water at 5 MPa low pressure until output runs clean. Disassemble homogenizing valve for deep clean as needed. Replace gearbox oil at 500 hours or sooner if emulsified by water ingress.