SED-420-31Y-D — SED-420-31Y-D Automatic Rotary Tablet Press
A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English
SED-420-31Y-D is an enclosed automatic rotary tablet pressing machine with 31 punch stations and a button-style operator panel. The dual-pressing turret continuously feeds, fills, presses and ejects tablets at up to 0–30
Como funciona
A motor drives the spindle through a timing belt and worm/worm-gear pair sealed in an oil bath. The spindle rotates the turret carrying 31 sets of upper/lower punches and dies clockwise. As each station passes through (a) the sifting feeder for filling, (b) the upper/lower guide rails to set fill depth, (c) the upper/lower press wheels for the main pressing event, and (d) the discharge cam, a tablet is formed and pushed off into the discharge chute. A safety unloading device on the upper press wheel: when actual punching pressure exceeds the spring set value, the upper press wheel lifts via balancing-spring displacement, a process switch trips, the buzzer/light alarm is triggered and the machine auto-stops. A dust-suction auxiliary keeps the pressing room under negative pressure to remove airborne powder.
Especificações técnicas
Especificações
Dimensões
Materiais
Compatibilidade
Operação
Características físicas
Características principais
Aplicações
Setores
Marcas dos componentes
Conformidade
Limpeza e manutenção
Wipe outer/inner machine surfaces and conveyor with clean wet towel before and after each shift; open the machine to wipe internals; clean hopper first with a clean towel and then with 75% industrial alcohol for sterilisation. After each batch / when stopping, remove all remaining powder; if stopping for a long time, dismantle all punches/dies, clean the whole machine, oil polished surfaces and cover with cloth. Inspect worm-gear, bearings, press wheels, crankshaft, upper/lower tracks 1–2 times per month and repair any defects. Lubricate per schedule: N46 oil in summer / N32 in winter for worm gearbox (worm 1/3 immersed); replace every 6 months. Lubricate upper press-wheel surface via two round caps on top cover (drop oil only enough for felt absorption). Open right side panel every 6 months to grease the spindle lower bearings. N32 oil on punches/tracks (sparingly). Clear cooling-fan dust on electrical components regularly with compressed air.