Início / Equipamentos / Resfriador de água / Air-Cooled Water Chiller (SED-1LSJ-G, 1 HP)

SED-1LSJ-G

Consultar

SED · SED-1LSJ-G · 19 unidades vendidas

SED-1LSJ-G — Air-Cooled Water Chiller

A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English

SED-1LSJ-G is a 1 HP air-cooled water chiller with 3.6 kW (3,200 kcal/hr) cooling capacity. Designed to provide chilled water at 5-35°C for cooling pharmaceutical packaging machines (such as water-cooled aluminum-foil in

Standard refrigeration safety protections per industry normsR22/R407 refrigerant compliant with refrigerant regulations at production date

Escolher variante (1)

Prazo de entrega

Consultar

Capacidade de produção

1000 m3

Como funciona

Standard vapor-compression refrigeration cycle: the fully sealed scroll compressor compresses R22/R407 refrigerant to high-pressure vapor; the wind-cooled finned condenser (1000 m³ axial fan flow) rejects heat to ambient air; capillary expansion drops pressure; the coil-type evaporator absorbs heat from the recirculating water in the 20 L stainless steel tank, chilling it to the 5-35°C setpoint. The internal 0.37 kW pump (20 m head) circulates chilled water through 1" inlet/outlet pipes to the user equipment at 0.48 m³/hr. Comprehensive safeties (compressor over-heat, over-current, high/low pressure, over-temp, flow, phase sequence, exhaust over-heat, anti-freeze) cut the unit on fault.

Processo de funcionamento

1Standard vapor-compression refrigeration cycle: the fully sealed scroll compressor compresses R22/R407 refrigerant to high-pressure vapor; the wind-cooled finned condenser (1000 m³ axial fan flow) rejects heat to ambient air; capillary expansion drops pressure; the coil-type evaporator absorbs heat from the recirculating water in the 20 L stainless steel tank, chilling it to the 5-35°C setpoint.

2The internal 0.37 kW pump (20 m head) circulates chilled water through 1" inlet/outlet pipes to the user equipment at 0.48 m³/hr.

3Comprehensive safeties (compressor over-heat, over-current, high/low pressure, over-temp, flow, phase sequence, exhaust over-heat, anti-freeze) cut the unit on fault.

Especificações técnicas

Especificações da variante: SED-1LSJ-G 1 HP air-cooled chiller

Especificações

Modelo

SED-1LSJ-G

Capacidade de produção

1000 m3

Tensão

1 HP, 220V/50Hz monofásica

Utilidades

AC 220V/50Hz single-phase electric supply (1.3 kW input); make-up water for the 20 L tank; clean ambient air intake (no compressed air needed)

Detalhes de conformidade

Standard refrigeration safety devices; R22/R407 refrigerant compliant with current refrigerant regulations at production date; pharmaceutical-grade chilled water output suitable for GMP-relevant equipment

Potência

1.3 kW

Pressão de ar

Not applicable (water chiller)

Dimensões

Comprimento

550 mm

Largura

500 mm

Altura

920 mm

Peso

80 kg

Área de instalação

0.55 m (L) x 0.5 m (W) x 0.92 m (H); allow 0.5 m clearance around the air-cooled condenser fan for airflow

Materiais

Materiais de contato

Copper tubing; stainless steel insulated water tank; standard pump materials

Materiais do corpo

Painted steel cabinet; stainless steel water tank insulation

Componentes

Compressor Type

hermetic scroll (piston)

Condenser Type

air-cooled shell-and-tube, red copper + aluminum fins + low-noise axial fan

Evaporator Type

tank with coil (shell and tube)

Refrigerant Control

capillary vessel

Elétrica

Pump Power

0.37 kW

Operação

Chilled Fluid Flow

0.48 m³/h

Cooling Air Flow

1000 m³/h

Cooling Capacity

3600 W

Pump Lift

20 m

Características físicas

Inlet/Outlet Pipe Diameter

1" inch

Tank Volume

18.5 L

Características principais

1 HP cooling capacity — 3.6 kW (3,200 kcal/hr)

Fully sealed scroll compressor — low noise, high efficiency, long life

Wind-cooled (no cooling tower needed) — high-efficiency copper pipe with aluminum fins + low-noise axial fan

Coil-type evaporator with stainless steel insulated 20 L water tank

Built-in 0.37 kW water pump (20 m head)

Chilled water output 0.48 m³/h via 1" inlet/outlet pipes

Cooling range 5°C-35°C

R22 / R407 environmentally friendly refrigerant

Comprehensive safeguards: compressor over-heat, over-current, high/low pressure, over-temp, flow, phase, exhaust over-heat, anti-freeze

Single-phase 220V/50Hz, 1.3 kW input

Compact 550 x 500 x 920 mm; 80 kg

Plug-and-play air-cooled chiller — no cooling-tower install required

Right-sized at 3.6 kW for typical capsule fillers, tablet presses with mold cooling, and water-cooled induction sealers

Single-phase 220V means it runs anywhere SED machines run

Imported original compressor — quieter and longer-lasting than commodity chillers

Comprehensive safety protections protect the connected machine and the chiller itself

Affordable at $950-1,100 FOB

Stainless steel insulated tank — long water-temperature stability

Aplicações

Cooling water supply for water-cooled aluminum-foil induction sealing machines

Cooling for capsule filling machines requiring chilled water (gel mold cooling)

Tablet press mold and main-shaft cooling

Cooling for laboratory equipment and analytical instruments

Process water chilling for small pharma equipment

Cosmetics and food processing equipment cooling

Setores

Fabricação farmacêutica

Suplementos e nutracêuticos

Food and beverage processing

Cosmetics manufacturing

Laboratory / analytical

Plastic injection molding (small machines)

Marcas dos componentes

Imported scroll compressor (original) — fully sealed type

High-efficiency copper-tube + aluminum-fin condenser

Low-noise axial fan

Stainless steel insulated water tank

SED

Fale com SED Sales Team

Especialistas em equipamentos · contato pelo WhatsApp

Consulte o horário e a disponibilidade da equipe

+86 139 5885 3738

Enviar e-mail Conversar no WhatsApp →Solicitar chamada de 30 minutos →

Conformidade

Standard refrigeration safety protections per industry norms

R22/R407 refrigerant compliant with refrigerant regulations at production date

Limpeza e manutenção

Inspect and clean the finned condenser regularly to maintain heat-transfer efficiency. Drain and refill the water tank periodically to prevent algae growth. Check refrigerant pressure annually via certified technician. Verify safety devices (high/low pressure, anti-freeze, flow) function before each season. Keep the air-cooled condenser intake free of dust and obstructions.

Documentação

Ficha técnica (PDF)

Visão geral do equipamento, especificações e dimensões · Documento original (inglês)

Solicitar à equipe de vendas

Manual do operador

Instalação, operação e diagnóstico · Documento original (inglês)

Solicitar à equipe de vendas

Folha comparativa (Padrão e Econômica)

Comparação das configurações · Documento original (inglês)

Solicitar à equipe de vendas

Protocolos IQ / OQ / PQ

Documentação de validação para conformidade GMP · Documento original (inglês)

Solicitar à equipe de vendas

Protocolos FAT / SAT

Testes de aceitação na fábrica e no local · Documento original (inglês)

Solicitar à equipe de vendas

Desenhos CAD (STEP / IGES / DWG)

Desenhos de engenharia para a instalação · Documento original (inglês)

Solicitar à equipe de vendas

Certificados de calibração

Nível sonoro, resistência de terra, rigidez dielétrica e rugosidade · Documento original (inglês)

Solicitar à equipe de vendas

DQ (qualificação do projeto)

Protocolo completo de qualificação do projeto · Documento original (inglês)

Solicitar à equipe de vendas

Certificados de materiais

Composição do aço inoxidável 316L · Documento original (inglês)

Solicitar à equipe de vendas