Accueil / Équipements / Groupe d’eau glacée / Air-Cooled Water Chiller (SED-1LSJ-G, 1 HP)

SED-1LSJ-G

Sur devis

SED · SED-1LSJ-G · 19 unités vendues

SED-1LSJ-G — Air-Cooled Water Chiller

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-1LSJ-G is a 1 HP air-cooled water chiller with 3.6 kW (3,200 kcal/hr) cooling capacity. Designed to provide chilled water at 5-35°C for cooling pharmaceutical packaging machines (such as water-cooled aluminum-foil in

Standard refrigeration safety protections per industry normsR22/R407 refrigerant compliant with refrigerant regulations at production date

Choisir une variante (1)

Délai de livraison

Sur devis

Cadence

1000 m3

Fonctionnement

Standard vapor-compression refrigeration cycle: the fully sealed scroll compressor compresses R22/R407 refrigerant to high-pressure vapor; the wind-cooled finned condenser (1000 m³ axial fan flow) rejects heat to ambient air; capillary expansion drops pressure; the coil-type evaporator absorbs heat from the recirculating water in the 20 L stainless steel tank, chilling it to the 5-35°C setpoint. The internal 0.37 kW pump (20 m head) circulates chilled water through 1" inlet/outlet pipes to the user equipment at 0.48 m³/hr. Comprehensive safeties (compressor over-heat, over-current, high/low pressure, over-temp, flow, phase sequence, exhaust over-heat, anti-freeze) cut the unit on fault.

Processus de fonctionnement

1Standard vapor-compression refrigeration cycle: the fully sealed scroll compressor compresses R22/R407 refrigerant to high-pressure vapor; the wind-cooled finned condenser (1000 m³ axial fan flow) rejects heat to ambient air; capillary expansion drops pressure; the coil-type evaporator absorbs heat from the recirculating water in the 20 L stainless steel tank, chilling it to the 5-35°C setpoint.

2The internal 0.37 kW pump (20 m head) circulates chilled water through 1" inlet/outlet pipes to the user equipment at 0.48 m³/hr.

3Comprehensive safeties (compressor over-heat, over-current, high/low pressure, over-temp, flow, phase sequence, exhaust over-heat, anti-freeze) cut the unit on fault.

Caractéristiques techniques

Caractéristiques de la variante : SED-1LSJ-G 1 HP air-cooled chiller

Caractéristiques

Modèle

SED-1LSJ-G

Cadence

1000 m3

Tension

1 HP, 220V/50Hz monophasé

Fluides et énergie

AC 220V/50Hz single-phase electric supply (1.3 kW input); make-up water for the 20 L tank; clean ambient air intake (no compressed air needed)

Détails de conformité

Standard refrigeration safety devices; R22/R407 refrigerant compliant with current refrigerant regulations at production date; pharmaceutical-grade chilled water output suitable for GMP-relevant equipment

Puissance

1.3 kW

Pression d’air

Not applicable (water chiller)

Dimensions

Longueur

550 mm

Largeur

500 mm

Hauteur

920 mm

Poids

80 kg

Emprise au sol

0.55 m (L) x 0.5 m (W) x 0.92 m (H); allow 0.5 m clearance around the air-cooled condenser fan for airflow

Matériaux

Matériaux en contact

Copper tubing; stainless steel insulated water tank; standard pump materials

Matériaux du bâti

Painted steel cabinet; stainless steel water tank insulation

Composants

Compressor Type

hermetic scroll (piston)

Condenser Type

air-cooled shell-and-tube, red copper + aluminum fins + low-noise axial fan

Evaporator Type

tank with coil (shell and tube)

Refrigerant Control

capillary vessel

Alimentation électrique

Pump Power

0.37 kW

Fonctionnement

Chilled Fluid Flow

0.48 m³/h

Cooling Air Flow

1000 m³/h

Cooling Capacity

3600 W

Pump Lift

20 m

Caractéristiques physiques

Inlet/Outlet Pipe Diameter

1" inch

Tank Volume

18.5 L

Caractéristiques principales

1 HP cooling capacity — 3.6 kW (3,200 kcal/hr)

Fully sealed scroll compressor — low noise, high efficiency, long life

Wind-cooled (no cooling tower needed) — high-efficiency copper pipe with aluminum fins + low-noise axial fan

Coil-type evaporator with stainless steel insulated 20 L water tank

Built-in 0.37 kW water pump (20 m head)

Chilled water output 0.48 m³/h via 1" inlet/outlet pipes

Cooling range 5°C-35°C

R22 / R407 environmentally friendly refrigerant

Comprehensive safeguards: compressor over-heat, over-current, high/low pressure, over-temp, flow, phase, exhaust over-heat, anti-freeze

Single-phase 220V/50Hz, 1.3 kW input

Compact 550 x 500 x 920 mm; 80 kg

Plug-and-play air-cooled chiller — no cooling-tower install required

Right-sized at 3.6 kW for typical capsule fillers, tablet presses with mold cooling, and water-cooled induction sealers

Single-phase 220V means it runs anywhere SED machines run

Imported original compressor — quieter and longer-lasting than commodity chillers

Comprehensive safety protections protect the connected machine and the chiller itself

Affordable at $950-1,100 FOB

Stainless steel insulated tank — long water-temperature stability

Applications

Cooling water supply for water-cooled aluminum-foil induction sealing machines

Cooling for capsule filling machines requiring chilled water (gel mold cooling)

Tablet press mold and main-shaft cooling

Cooling for laboratory equipment and analytical instruments

Process water chilling for small pharma equipment

Cosmetics and food processing equipment cooling

Secteurs

Fabrication pharmaceutique

Compléments alimentaires et nutraceutiques

Food and beverage processing

Cosmetics manufacturing

Laboratory / analytical

Plastic injection molding (small machines)

Marques des composants

Imported scroll compressor (original) — fully sealed type

High-efficiency copper-tube + aluminum-fin condenser

Low-noise axial fan

Stainless steel insulated water tank

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

Standard refrigeration safety protections per industry norms

R22/R407 refrigerant compliant with refrigerant regulations at production date

Nettoyage et entretien

Inspect and clean the finned condenser regularly to maintain heat-transfer efficiency. Drain and refill the water tank periodically to prevent algae growth. Check refrigerant pressure annually via certified technician. Verify safety devices (high/low pressure, anti-freeze, flow) function before each season. Keep the air-cooled condenser intake free of dust and obstructions.