Showroom em Ontario, Califórnia · Consulte o suporte para seu destino
Início / Equipamentos / Misturador bidimensional / Mixing Machine - Two-Dimensional Mixing Machine
SED-1500EH-H
Consultar
SED-1500EH-H
SED · SED-1500EH-H · Em destaque

SED-1500EH-H — Mixing Machine - Two-Dimensional Mixing Machine

A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English

SED-1500EH-H Two-Dimensional Mixing Machine — 1,500 L two-axis swinging-and-rotating drum mixer for powder and granular materials. Drum simultaneously rotates and swings in two directions for short-cycle thorough mixing;

Escolher variante (1)
Prazo de entrega
Consultar
Capacidade de produção
1200–7200 kg/hour

Como funciona

The drum is supported by four wheels and axially located by two block rounds inside a swinging rack. Two of the four support rollers drive the drum's rotation, while a crankshaft swinging-rod assembly mounted on the frame drives the swinging rack back and forth. Materials are simultaneously rotated, overturned and mixed by drum rotation and reciprocally mixed by the rack's swing motion, achieving thorough blending in a short time.

Processo de funcionamento
1The drum is supported by four wheels and axially located by two block rounds inside a swinging rack.
2Two of the four support rollers drive the drum's rotation, while a crankshaft swinging-rod assembly mounted on the frame drives the swinging rack back and forth.
3Materials are simultaneously rotated, overturned and mixed by drum rotation and reciprocally mixed by the rack's swing motion, achieving thorough blending in a short time.

Especificações técnicas

Especificações da variante: SED-1500EH-H 1

Especificações

Modelo
SED-1500EH-H
Capacidade de produção
1200–7200 kg/hour
Utilidades
Electrical power for rotation motor 3 kW + swing motor 1.5 kW (total 4.5 kW).
Detalhes de conformidade
Not explosion-proof; cannot be used in explosion-proof environments.
Potência
4.5 kW

Dimensões

Comprimento
1800 mm
Largura
1550 mm
Altura
2280 mm
Área de instalação
Overall A1,800 × B1,550 × H2,280 mm (D=980, M=2,340). Below 60 L units do not need anchor bolts; this 1,500 L unit requires a level (≤3/1000 unevenness) solid foundation. Optional 10–16 mm rubber anti-shock pads to absorb vibration.

Características principais

Two-dimensional motion: drum rotation + swinging rack reciprocation
1,500 L total volume; 750 L loading volume; 550 kg max load
Independent rotation drive (3 kW) + swing drive (1.5 kW)
Crankshaft swinging-rod mechanism on solid frame
Magnetic-control operation panel, factory-limited max speed
Timer-based auto stop after preset mixing time
Drum supported on four rollers + axial block-rounds
Fast, uniform mixing of powders and granular materials in short cycle time
Mid-range 550 kg batch capacity ideal for pilot scale and small commercial batches
Simple operator workflow: power on, set time, start; auto stop
Robust crankshaft-driven swing mechanism, periodic 3-month lubrication only

Aplicações

Powder mixing
Granule blending
Pre-compression mix preparation in solid-dose pharma manufacturing

Setores

Pharmaceutical solid preparation
Chemical and food powder/granule blending
SED
Fale com SED Sales Team
Especialistas em equipamentos · contato pelo WhatsApp
Consulte o horário e a disponibilidade da equipe

Limpeza e manutenção

Inspect drum interior is clean and dry before each batch; ensure no debris in drive wheels. After mixing, shut down in reverse order of start. Lubricate every part periodically (grease/oil every three months); refill bearings to two-thirds grease after each repair. Avoid damp on electrical lines.

Documentação

Ficha técnica (PDF)
Visão geral do equipamento, especificações e dimensões · Documento original (inglês)
Solicitar à equipe de vendas
Manual do operador
Instalação, operação e diagnóstico · Documento original (inglês)
Solicitar à equipe de vendas
Folha comparativa (Padrão e Econômica)
Comparação das configurações · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos IQ / OQ / PQ
Documentação de validação para conformidade GMP · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos FAT / SAT
Testes de aceitação na fábrica e no local · Documento original (inglês)
Solicitar à equipe de vendas
Desenhos CAD (STEP / IGES / DWG)
Desenhos de engenharia para a instalação · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de calibração
Nível sonoro, resistência de terra, rigidez dielétrica e rugosidade · Documento original (inglês)
Solicitar à equipe de vendas
DQ (qualificação do projeto)
Protocolo completo de qualificação do projeto · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de materiais
Composição do aço inoxidável 316L · Documento original (inglês)
Solicitar à equipe de vendas
SED
WhatsApp · Vendas SED
Contato comercial · WhatsApp
→