Ausstellung in Ontario, Kalifornien · Support am Zielort anfragen
Startseite / Maschinen / Zweidimensionaler Mischer / Mixing Machine - Two-Dimensional Mixing Machine
SED-1500EH-H
Auf Anfrage
SED-1500EH-H
SED · SED-1500EH-H · Hervorgehoben

SED-1500EH-H — Mixing Machine - Two-Dimensional Mixing Machine

Die vollständige Beschreibung dieses Modells wird noch übersetzt. Lesen Sie die englischen Details oder fragen Sie unser Team nach weiteren Informationen. English

SED-1500EH-H Two-Dimensional Mixing Machine — 1,500 L two-axis swinging-and-rotating drum mixer for powder and granular materials. Drum simultaneously rotates and swings in two directions for short-cycle thorough mixing;

Variante wählen (1)
Lieferzeit
Auf Anfrage
Durchsatz
1200–7200 kg/hour

Funktionsweise

The drum is supported by four wheels and axially located by two block rounds inside a swinging rack. Two of the four support rollers drive the drum's rotation, while a crankshaft swinging-rod assembly mounted on the frame drives the swinging rack back and forth. Materials are simultaneously rotated, overturned and mixed by drum rotation and reciprocally mixed by the rack's swing motion, achieving thorough blending in a short time.

Prozessbeschreibung
1The drum is supported by four wheels and axially located by two block rounds inside a swinging rack.
2Two of the four support rollers drive the drum's rotation, while a crankshaft swinging-rod assembly mounted on the frame drives the swinging rack back and forth.
3Materials are simultaneously rotated, overturned and mixed by drum rotation and reciprocally mixed by the rack's swing motion, achieving thorough blending in a short time.

Technische Daten

Technische Daten für Variante: SED-1500EH-H 1

Technische Daten

Modell
SED-1500EH-H
Durchsatz
1200–7200 kg/hour
Versorgung
Electrical power for rotation motor 3 kW + swing motor 1.5 kW (total 4.5 kW).
Konformitätsangaben
Not explosion-proof; cannot be used in explosion-proof environments.
Leistung
4.5 kW

Abmessungen

Länge
1800 mm
Breite
1550 mm
Höhe
2280 mm
Aufstellfläche
Overall A1,800 × B1,550 × H2,280 mm (D=980, M=2,340). Below 60 L units do not need anchor bolts; this 1,500 L unit requires a level (≤3/1000 unevenness) solid foundation. Optional 10–16 mm rubber anti-shock pads to absorb vibration.

Wesentliche Merkmale

Two-dimensional motion: drum rotation + swinging rack reciprocation
1,500 L total volume; 750 L loading volume; 550 kg max load
Independent rotation drive (3 kW) + swing drive (1.5 kW)
Crankshaft swinging-rod mechanism on solid frame
Magnetic-control operation panel, factory-limited max speed
Timer-based auto stop after preset mixing time
Drum supported on four rollers + axial block-rounds
Fast, uniform mixing of powders and granular materials in short cycle time
Mid-range 550 kg batch capacity ideal for pilot scale and small commercial batches
Simple operator workflow: power on, set time, start; auto stop
Robust crankshaft-driven swing mechanism, periodic 3-month lubrication only

Anwendungen

Powder mixing
Granule blending
Pre-compression mix preparation in solid-dose pharma manufacturing

Branchen

Pharmaceutical solid preparation
Chemical and food powder/granule blending
SED
Sprechen Sie mit SED Sales Team
Maschinenspezialisten · Kontakt per WhatsApp
Geschäftszeiten und Verfügbarkeit beim Team erfragen

Reinigung und Wartung

Inspect drum interior is clean and dry before each batch; ensure no debris in drive wheels. After mixing, shut down in reverse order of start. Lubricate every part periodically (grease/oil every three months); refill bearings to two-thirds grease after each repair. Avoid damp on electrical lines.

Dokumentation

Datenblatt (PDF)
Überblick, technische Daten und Abmessungen · Originaldokument (Englisch)
Beim Vertrieb anfragen
Bedienhandbuch
Einrichtung, Betrieb und Fehlersuche · Originaldokument (Englisch)
Beim Vertrieb anfragen
Vergleichsdatenblatt (Standard und Economy)
Vergleich der Konfigurationen · Originaldokument (Englisch)
Beim Vertrieb anfragen
IQ / OQ / PQ-Protokolle
Validierungsunterlagen zur GMP-Konformität · Originaldokument (Englisch)
Beim Vertrieb anfragen
FAT / SAT-Protokolle
Abnahmeprüfungen im Werk und vor Ort · Originaldokument (Englisch)
Beim Vertrieb anfragen
CAD-Zeichnungen (STEP / IGES / DWG)
Konstruktionszeichnungen für die Aufstellung · Originaldokument (Englisch)
Beim Vertrieb anfragen
Kalibrierzertifikate
Schallpegel, Erdungswiderstand, Spannungsfestigkeit und Rauheit · Originaldokument (Englisch)
Beim Vertrieb anfragen
DQ (Designqualifizierung)
Vollständiges Designqualifizierungsprotokoll · Originaldokument (Englisch)
Beim Vertrieb anfragen
Werkstoffzeugnisse
Zusammensetzung des Edelstahls 316L · Originaldokument (Englisch)
Beim Vertrieb anfragen
SED
WhatsApp · SED Vertrieb
Vertriebskontakt · WhatsApp
→