Sala de exposición en Ontario, California · Consulte el soporte para su destino
Inicio / Equipos / Mezclador bidimensional / Mixing Machine - Two-Dimensional Mixing Machine
SED-1500EH-H
Consultar
SED-1500EH-H
SED · SED-1500EH-H · Destacado

SED-1500EH-H — Mixing Machine - Two-Dimensional Mixing Machine

La descripción completa de este modelo aún se está traduciendo. Consulte los detalles en inglés o solicite información a nuestro equipo. English

SED-1500EH-H Two-Dimensional Mixing Machine — 1,500 L two-axis swinging-and-rotating drum mixer for powder and granular materials. Drum simultaneously rotates and swings in two directions for short-cycle thorough mixing;

Elegir variante (1)
Plazo de entrega
Consultar
Capacidad de producción
1200–7200 kg/hour

Funcionamiento

The drum is supported by four wheels and axially located by two block rounds inside a swinging rack. Two of the four support rollers drive the drum's rotation, while a crankshaft swinging-rod assembly mounted on the frame drives the swinging rack back and forth. Materials are simultaneously rotated, overturned and mixed by drum rotation and reciprocally mixed by the rack's swing motion, achieving thorough blending in a short time.

Proceso de funcionamiento
1The drum is supported by four wheels and axially located by two block rounds inside a swinging rack.
2Two of the four support rollers drive the drum's rotation, while a crankshaft swinging-rod assembly mounted on the frame drives the swinging rack back and forth.
3Materials are simultaneously rotated, overturned and mixed by drum rotation and reciprocally mixed by the rack's swing motion, achieving thorough blending in a short time.

Especificaciones técnicas

Especificaciones de la variante: SED-1500EH-H 1

Especificaciones

Modelo
SED-1500EH-H
Capacidad de producción
1200–7200 kg/hour
Suministros
Electrical power for rotation motor 3 kW + swing motor 1.5 kW (total 4.5 kW).
Detalles de conformidad
Not explosion-proof; cannot be used in explosion-proof environments.
Potencia
4.5 kW

Dimensiones

Longitud
1800 mm
Anchura
1550 mm
Altura
2280 mm
Superficie de instalación
Overall A1,800 × B1,550 × H2,280 mm (D=980, M=2,340). Below 60 L units do not need anchor bolts; this 1,500 L unit requires a level (≤3/1000 unevenness) solid foundation. Optional 10–16 mm rubber anti-shock pads to absorb vibration.

Características principales

Two-dimensional motion: drum rotation + swinging rack reciprocation
1,500 L total volume; 750 L loading volume; 550 kg max load
Independent rotation drive (3 kW) + swing drive (1.5 kW)
Crankshaft swinging-rod mechanism on solid frame
Magnetic-control operation panel, factory-limited max speed
Timer-based auto stop after preset mixing time
Drum supported on four rollers + axial block-rounds
Fast, uniform mixing of powders and granular materials in short cycle time
Mid-range 550 kg batch capacity ideal for pilot scale and small commercial batches
Simple operator workflow: power on, set time, start; auto stop
Robust crankshaft-driven swing mechanism, periodic 3-month lubrication only

Aplicaciones

Powder mixing
Granule blending
Pre-compression mix preparation in solid-dose pharma manufacturing

Sectores

Pharmaceutical solid preparation
Chemical and food powder/granule blending
SED
Hable con SED Sales Team
Especialistas en equipos · contacto por WhatsApp
Consulte el horario y la disponibilidad del equipo

Limpieza y mantenimiento

Inspect drum interior is clean and dry before each batch; ensure no debris in drive wheels. After mixing, shut down in reverse order of start. Lubricate every part periodically (grease/oil every three months); refill bearings to two-thirds grease after each repair. Avoid damp on electrical lines.

Documentación

Ficha técnica (PDF)
Resumen del equipo, especificaciones y dimensiones · Documento original (inglés)
Solicitar al equipo comercial
Manual del operador
Instalación, funcionamiento y diagnóstico · Documento original (inglés)
Solicitar al equipo comercial
Ficha comparativa (Estándar y Económica)
Comparación de configuraciones · Documento original (inglés)
Solicitar al equipo comercial
Protocolos IQ / OQ / PQ
Documentación de validación para conformidad GMP · Documento original (inglés)
Solicitar al equipo comercial
Protocolos FAT / SAT
Pruebas de aceptación en fábrica y en sitio · Documento original (inglés)
Solicitar al equipo comercial
Planos CAD (STEP / IGES / DWG)
Planos de ingeniería para la instalación · Documento original (inglés)
Solicitar al equipo comercial
Certificados de calibración
Nivel sonoro, resistencia de tierra, rigidez dieléctrica y rugosidad · Documento original (inglés)
Solicitar al equipo comercial
DQ (cualificación del diseño)
Protocolo completo de cualificación del diseño · Documento original (inglés)
Solicitar al equipo comercial
Certificados de materiales
Composición del acero inoxidable 316L · Documento original (inglés)
Solicitar al equipo comercial
SED
WhatsApp · Ventas SED
Contacto comercial · WhatsApp
→