Início / Equipamentos / Secador de forno rotativo / Rotary Drum (Kiln) Dryer Φ1.6 m × 7 m (SED-1.6-7HYG-E)
SED-1.6-7HYG-E
Consultar
SED-1.6-7HYG-E
SED · SED-1.6-7HYG-E · Em destaque
SED-1.6-7HYG-E — Rotary Drum Dryer Φ1.6 m × 7 m
A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English
SED-1.6-7HYG-E is a Φ1.6 m × 7 m rotary drum dryer with an SS304 drum and ~14 m³ evaporation volume. Wet material is fed continuously into the drum head via a 3 kW food-grade silicone/SS304 belt feeder and contacts hot a
Prazo de entrega
Consultar
Capacidade de produção
2000 kg/h
Como funciona
Wet material enters the drum head via the belt feeder and metering device. The slightly inclined Φ1.6 m × 7 m drum rotates at 0–6 rpm (VFD, Siemens 11 kW motor + SEW gearbox). Internal SS304 lifters continuously pick up and shower the material, forming a stable full-section material curtain that maximizes heat exchange with hot air. The dryer can operate in counter-current mode (flue gas and wet material enter from opposite ends) for high evaporation intensity. Dried product exits at the drum tail; residual fines entrained in exhaust air are recovered in a buyer-supplied separator. Exhaust air is discharged by a buyer-supplied induced-draft fan.
Processo de funcionamento
1Wet material enters the drum head via the belt feeder and metering device.
2The slightly inclined Φ1.6 m × 7 m drum rotates at 0–6 rpm (VFD, Siemens 11 kW motor + SEW gearbox).
3Internal SS304 lifters continuously pick up and shower the material, forming a stable full-section material curtain that maximizes heat exchange with hot air.
4The dryer can operate in counter-current mode (flue gas and wet material enter from opposite ends) for high evaporation intensity.
5Dried product exits at the drum tail; residual fines entrained in exhaust air are recovered in a buyer-supplied separator.
6Exhaust air is discharged by a buyer-supplied induced-draft fan.
Especificações técnicas
Especificações da variante: SED-1.6-7HYG-E
Especificações
Modelo
SED-1.6-7HYG-E
Capacidade de produção
2000 kg/h
Tensão
220V 60Hz; control 110/220 VAC (Korean spec)
Utilidades
Hot water 60 °C for the air heat exchanger (buyer-supplied) — primary heat source. Electrical power 220 V 60 Hz (Korean spec); installed 14 kW (actual ~10 kW/h). Blower ~16 859 m³/h (buyer-supplied). Compressed air for seal devices if applicable.
Detalhes de conformidade
Drum and contact parts SS304 (drum 8 mm, head 4 mm, tail 5 mm, lifters 3 mm); belt feeder food-grade silicone with SS304 frame. 13% VAT included in quoted price. Warranty 1 year for normal use; lifetime on-site service for parts replacement. Only normal operation guaranteed; output throughput is not guaranteed.
Potência
14 kW
Dimensões
Comprimento
7000 mm
Largura
1600 mm
Área de instalação
Drum Φ1.6 m × 7 m length plus head/tail and feed/discharge skids. Project ships as 5 sets per quotation. Auxiliaries (blower, induced-draft fan, dust collector, heat exchanger) require separate footprint — buyer-supplied.
Materiais
Materiais de contato
SS304 stainless steel drum shell (8 mm), lifters (3 mm), head (4 mm), tail (5 mm); SS304 feed and discharge piping; food-grade silicone belt with SS304 frame.
Materiais do corpo
SS304 stainless steel drum and end heads; ZG45 cast steel for drive gears, support rollers and tires; SS304 control cabinet shell.
Características principais
Φ1.6 m × 7 m SS304 rotary drum, ~14 m³ evaporation volume
Drum shell 8 mm SS304; lifters 3 mm SS304; head 4 mm SS304; tail 5 mm SS304
0–6 rpm VFD control via Siemens 11 kW motor + SEW gearbox
Drive gears, support rollers and tires: ZG45 cast steel (Xuzhou Hezhong)
ABB/Schneider electrical components; Siemens S7-200 PLC; Siemens 7-inch HMI; Shanghai Xingwei 11 kW VFD
Zhejiang temperature probes (M27×2)
3 kW food-grade silicone/SS304 belt feeder
Installed power 14 kW; actual consumption ~10 kW/h
Heat source: 60 °C hot water heat exchanger (buyer-supplied)
Counter-current or co-current operation selectable
Zero-horizontal-thrust design reduces idler-roller wear; self-aligning idler arrangement
High throughput and low fuel consumption; overload-resistant
Counter-current option for high evaporation intensity from hot air
Stable full-section material curtain enables uniform heat exchange
New feed/discharge device eliminates jamming, irregular feeding and back-flow
Self-aligning idler rollers minimize wear and power loss
SS304 product-contact construction for food / pharma intermediates
Aplicações
Drying granular and powder materials in food, chemical and metallurgical applications
Bulk material drying from 25–30% inlet moisture down to < 13% outlet moisture
Continuous high-throughput industrial drying
Setores
Metallurgy
Building materials
Chemical
Food / pharma intermediates
Marcas dos componentes
Drive motor: Siemens 11 kW
Gearbox: SEW
Drive gears, rollers, tires: ZG45 — Xuzhou Hezhong
Electrical components: ABB / Schneider
PLC: Siemens S7-200
HMI: Siemens 7-inch
VFD: Shanghai Xingwei 11 kW
Temperature probes: Zhejiang (M27×2)
SED
Fale com SED Sales Team
Especialistas em equipamentos · contato pelo WhatsApp
Consulte o horário e a disponibilidade da equipe
Limpeza e manutenção
Self-cleaning lifters reduce wall fouling. Access through head and tail seals for periodic inspection. Belt feeder uses food-grade silicone for easy washdown.
Documentação
Ficha técnica (PDF)
Visão geral do equipamento, especificações e dimensões · Documento original (inglês)
Solicitar à equipe de vendas
Manual do operador
Instalação, operação e diagnóstico · Documento original (inglês)
Solicitar à equipe de vendas
Folha comparativa (Padrão e Econômica)
Comparação das configurações · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos IQ / OQ / PQ
Documentação de validação para conformidade GMP · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos FAT / SAT
Testes de aceitação na fábrica e no local · Documento original (inglês)
Solicitar à equipe de vendas
Desenhos CAD (STEP / IGES / DWG)
Desenhos de engenharia para a instalação · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de calibração
Nível sonoro, resistência de terra, rigidez dielétrica e rugosidade · Documento original (inglês)
Solicitar à equipe de vendas
DQ (qualificação do projeto)
Protocolo completo de qualificação do projeto · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de materiais
Composição do aço inoxidável 316L · Documento original (inglês)
Solicitar à equipe de vendas