Accueil / Équipements / Sécheur à four rotatif / Rotary Drum (Kiln) Dryer Φ1.6 m × 7 m (SED-1.6-7HYG-E)

SED-1.6-7HYG-E

Sur devis

SED-1.6-7HYG-E

SED · SED-1.6-7HYG-E · En vedette

SED-1.6-7HYG-E — Rotary Drum Dryer Φ1.6 m × 7 m

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-1.6-7HYG-E is a Φ1.6 m × 7 m rotary drum dryer with an SS304 drum and ~14 m³ evaporation volume. Wet material is fed continuously into the drum head via a 3 kW food-grade silicone/SS304 belt feeder and contacts hot a

Délai de livraison

Sur devis

Cadence

2000 kg/h

Fonctionnement

Wet material enters the drum head via the belt feeder and metering device. The slightly inclined Φ1.6 m × 7 m drum rotates at 0–6 rpm (VFD, Siemens 11 kW motor + SEW gearbox). Internal SS304 lifters continuously pick up and shower the material, forming a stable full-section material curtain that maximizes heat exchange with hot air. The dryer can operate in counter-current mode (flue gas and wet material enter from opposite ends) for high evaporation intensity. Dried product exits at the drum tail; residual fines entrained in exhaust air are recovered in a buyer-supplied separator. Exhaust air is discharged by a buyer-supplied induced-draft fan.

Processus de fonctionnement

1Wet material enters the drum head via the belt feeder and metering device.

2The slightly inclined Φ1.6 m × 7 m drum rotates at 0–6 rpm (VFD, Siemens 11 kW motor + SEW gearbox).

3Internal SS304 lifters continuously pick up and shower the material, forming a stable full-section material curtain that maximizes heat exchange with hot air.

4The dryer can operate in counter-current mode (flue gas and wet material enter from opposite ends) for high evaporation intensity.

5Dried product exits at the drum tail; residual fines entrained in exhaust air are recovered in a buyer-supplied separator.

6Exhaust air is discharged by a buyer-supplied induced-draft fan.

Caractéristiques techniques

Caractéristiques de la variante : SED-1.6-7HYG-E

Caractéristiques

Modèle

SED-1.6-7HYG-E

Cadence

2000 kg/h

Tension

220V 60Hz; control 110/220 VAC (Korean spec)

Fluides et énergie

Hot water 60 °C for the air heat exchanger (buyer-supplied) — primary heat source. Electrical power 220 V 60 Hz (Korean spec); installed 14 kW (actual ~10 kW/h). Blower ~16 859 m³/h (buyer-supplied). Compressed air for seal devices if applicable.

Détails de conformité

Drum and contact parts SS304 (drum 8 mm, head 4 mm, tail 5 mm, lifters 3 mm); belt feeder food-grade silicone with SS304 frame. 13% VAT included in quoted price. Warranty 1 year for normal use; lifetime on-site service for parts replacement. Only normal operation guaranteed; output throughput is not guaranteed.

Puissance

14 kW

Dimensions

Longueur

7000 mm

Largeur

1600 mm

Emprise au sol

Drum Φ1.6 m × 7 m length plus head/tail and feed/discharge skids. Project ships as 5 sets per quotation. Auxiliaries (blower, induced-draft fan, dust collector, heat exchanger) require separate footprint — buyer-supplied.

Matériaux

Matériaux en contact

SS304 stainless steel drum shell (8 mm), lifters (3 mm), head (4 mm), tail (5 mm); SS304 feed and discharge piping; food-grade silicone belt with SS304 frame.

Matériaux du bâti

SS304 stainless steel drum and end heads; ZG45 cast steel for drive gears, support rollers and tires; SS304 control cabinet shell.

Caractéristiques principales

Φ1.6 m × 7 m SS304 rotary drum, ~14 m³ evaporation volume

Drum shell 8 mm SS304; lifters 3 mm SS304; head 4 mm SS304; tail 5 mm SS304

0–6 rpm VFD control via Siemens 11 kW motor + SEW gearbox

Drive gears, support rollers and tires: ZG45 cast steel (Xuzhou Hezhong)

ABB/Schneider electrical components; Siemens S7-200 PLC; Siemens 7-inch HMI; Shanghai Xingwei 11 kW VFD

Zhejiang temperature probes (M27×2)

3 kW food-grade silicone/SS304 belt feeder

Installed power 14 kW; actual consumption ~10 kW/h

Heat source: 60 °C hot water heat exchanger (buyer-supplied)

Counter-current or co-current operation selectable

Zero-horizontal-thrust design reduces idler-roller wear; self-aligning idler arrangement

High throughput and low fuel consumption; overload-resistant

Counter-current option for high evaporation intensity from hot air

Stable full-section material curtain enables uniform heat exchange

New feed/discharge device eliminates jamming, irregular feeding and back-flow

Self-aligning idler rollers minimize wear and power loss

SS304 product-contact construction for food / pharma intermediates

Applications

Drying granular and powder materials in food, chemical and metallurgical applications

Bulk material drying from 25–30% inlet moisture down to < 13% outlet moisture

Continuous high-throughput industrial drying

Secteurs

Metallurgy

Building materials

Chemical

Food / pharma intermediates

Marques des composants

Drive motor: Siemens 11 kW

Gearbox: SEW

Drive gears, rollers, tires: ZG45 — Xuzhou Hezhong

Electrical components: ABB / Schneider

PLC: Siemens S7-200

HMI: Siemens 7-inch

VFD: Shanghai Xingwei 11 kW

Temperature probes: Zhejiang (M27×2)

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

Self-cleaning lifters reduce wall fouling. Access through head and tail seals for periodic inspection. Belt feeder uses food-grade silicone for easy washdown.