Início / Equipamentos / Aspirador / Compact Smoke / Fume Purifier

SED-0.6XCQ-C

Consultar

SED-0.6XCQ-C

SED · SED-0.6XCQ-C · Em destaque

SED-0.6XCQ-C — Compact Smoke / Fume Purifier

A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English

SED-0.6XCQ-C Compact Smoke/Fume Purifier — a small industrial dust and smoke collector designed for laser marking, precision cutting, special-plastic welding, laser soldering, laser cleaning, and similar processes. Suita

Escolher variante (2)

Prazo de entrega

Consultar

Capacidade de produção

Fale conosco

Como funciona

Three-stage smoke and dust filtration with centrifugal fan suction. Contaminated air enters via a Φ65 mm (or Φ50/Φ38) suction port, drawn by a high-pressure centrifugal blower (frequency-division motor with closed-loop control). Stage 1: 4 pleated filter cartridges with large surface area trap macro particles; pulse-jet auto-cleaning maintains filter performance during operation. Optional fire-resistant or high-temperature cartridges, pre-cyclone separator, and universal suction arm available. Stage 2: Coconut-shell activated carbon filter (no carbon leakage, uniform distribution) + HEPA filter for chemical vapors and sub-micron particles. Stage 3 (E option): Aluminum-alloy frame pleated HEPA filter, ≥99% efficiency at 0.3 µm.

Processo de funcionamento

1Three-stage smoke and dust filtration with centrifugal fan suction.

2Contaminated air enters via a Φ65 mm (or Φ50/Φ38) suction port, drawn by a high-pressure centrifugal blower (frequency-division motor with closed-loop control).

3Stage 1: 4 pleated filter cartridges with large surface area trap macro particles; pulse-jet auto-cleaning maintains filter performance during operation.

4Optional fire-resistant or high-temperature cartridges, pre-cyclone separator, and universal suction arm available.

5Stage 2: Coconut-shell activated carbon filter (no carbon leakage, uniform distribution) + HEPA filter for chemical vapors and sub-micron particles.

6Stage 3 (E option): Aluminum-alloy frame pleated HEPA filter, ≥99% efficiency at 0.3 µm.

Especificações técnicas

Especificações da variante: SED-0 this model

Especificações

Modelo

SED-0.6XCQ-C

Tensão

AC 220 V single-phase, 50 Hz, 3.8 A rated current

Utilidades

AC 220 V single-phase / 50 Hz / 3.8 A rated current / 600 W. Supplied with 1.5 m national-standard power cord. No compressed air, steam, or water required.

Detalhes de conformidade

Designed for use in Pollution Degree II environments and Overvoltage Category II equipment fed from the electrical-distribution network (appliances, portable tools, household-similar loads). For applications requiring extra safety/reliability, Overvoltage Category III applies. Not suitable for areas with flammable, explosive, or corrosive gas/smoke/vapor accumulation.

Potência

0.6 kW

Pressão de ar

Max static pressure 4.8 kPa

Dimensões

Comprimento

400 mm

Largura

400 mm

Altura

1050 mm

Peso

30.5 kg

Área de instalação

400 (L) × 400 (W) × 1050 (H) mm; weight 30.5 kg. Can be placed under or beside equipment.

Materiais

Materiais do corpo

Aluminum alloy (HEPA filter frame and blower casing)

Características principais

Three-stage filtration: 4 pleated cartridges + coconut-shell carbon + HEPA (+ optional Al-frame pleated HEPA ≥99% at 0.3 µm)

Pleated cartridge design with automatic pulse-jet self-cleaning during operation

Coconut-shell activated carbon — no carbon leakage, no clumping, high adsorption capacity

Centrifugal blower with frequency-division closed-loop control — high suction, compact size

Maximum airflow 5.8 m³/min, maximum static pressure 4.8 kPa

Suction adjustable; status LEDs indicate filter condition and machine anomalies

Remote control interface: 8 signal points (air-pressure output, remote start enable, filter-blockage signal, run status, overload status, remote/local switch, DC12V output, GND)

PLC / lower-machine linkage for automation line integration

Dimensions 400 × 400 × 1050 mm; weight 30.5 kg; nozzle Φ65 mm standard

Half the volume, double the suction of comparable competitor units (same power class)

Embeds under equipment or into MES automation lines — minimal floor space

Adjustable suction + remote control / PLC linkage for unmanned laser workflows

Three-stage filtration handles both particulates and chemical fumes in a single unit

Aplicações

Laser marking fume extraction

Precision cutting smoke/dust collection

Special-plastic welding fume extraction

Laser soldering fume extraction

Laser cleaning fume extraction

Point-of-use dust/smoke collection in clean rooms

Setores

Electronics components

Automation equipment

Semiconductor manufacturing

Automotive parts

Mobile phone parts and LCD displays

Aerospace

Fabricação farmacêutica

Scientific laboratories

SED

Fale com SED Sales Team

Especialistas em equipamentos · contato pelo WhatsApp

Consulte o horário e a disponibilidade da equipe

+86 139 5885 3738

Enviar e-mail Conversar no WhatsApp →Solicitar chamada de 30 minutos →

Limpeza e manutenção

Pleated cartridge filters are pulse-jet auto-cleaned during operation. Replaceable consumables: primary cartridge DH140200 (×4); secondary/tertiary filter HP310H50. Status LEDs on the control panel indicate when each filter stage requires replacement. Do NOT use the purifier to collect: flammable substances (gasoline, thinner, benzene, kerosene, paint), explosive dusts (aluminum, magnesium, titanium, zinc, epoxy resin, cobalt powder, carbon black, flour, tobacco, oils, pharmaceuticals or other liquid aerosols), or corrosive gases (ozone, formic acid, HCl).

Documentação

Ficha técnica (PDF)

Visão geral do equipamento, especificações e dimensões · Documento original (inglês)

Solicitar à equipe de vendas

Manual do operador

Instalação, operação e diagnóstico · Documento original (inglês)

Solicitar à equipe de vendas

Folha comparativa (Padrão e Econômica)

Comparação das configurações · Documento original (inglês)

Solicitar à equipe de vendas

Protocolos IQ / OQ / PQ

Documentação de validação para conformidade GMP · Documento original (inglês)

Solicitar à equipe de vendas

Protocolos FAT / SAT

Testes de aceitação na fábrica e no local · Documento original (inglês)

Solicitar à equipe de vendas

Desenhos CAD (STEP / IGES / DWG)

Desenhos de engenharia para a instalação · Documento original (inglês)

Solicitar à equipe de vendas

Certificados de calibração

Nível sonoro, resistência de terra, rigidez dielétrica e rugosidade · Documento original (inglês)

Solicitar à equipe de vendas

DQ (qualificação do projeto)

Protocolo completo de qualificação do projeto · Documento original (inglês)

Solicitar à equipe de vendas

Certificados de materiais

Composição do aço inoxidável 316L · Documento original (inglês)

Solicitar à equipe de vendas