Accueil / Équipements / Aspirateur / Compact Smoke / Fume Purifier

SED-0.6XCQ-C

Sur devis

SED-0.6XCQ-C

SED · SED-0.6XCQ-C · En vedette

SED-0.6XCQ-C — Compact Smoke / Fume Purifier

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-0.6XCQ-C Compact Smoke/Fume Purifier — a small industrial dust and smoke collector designed for laser marking, precision cutting, special-plastic welding, laser soldering, laser cleaning, and similar processes. Suita

Choisir une variante (2)

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

Three-stage smoke and dust filtration with centrifugal fan suction. Contaminated air enters via a Φ65 mm (or Φ50/Φ38) suction port, drawn by a high-pressure centrifugal blower (frequency-division motor with closed-loop control). Stage 1: 4 pleated filter cartridges with large surface area trap macro particles; pulse-jet auto-cleaning maintains filter performance during operation. Optional fire-resistant or high-temperature cartridges, pre-cyclone separator, and universal suction arm available. Stage 2: Coconut-shell activated carbon filter (no carbon leakage, uniform distribution) + HEPA filter for chemical vapors and sub-micron particles. Stage 3 (E option): Aluminum-alloy frame pleated HEPA filter, ≥99% efficiency at 0.3 µm.

Processus de fonctionnement

1Three-stage smoke and dust filtration with centrifugal fan suction.

2Contaminated air enters via a Φ65 mm (or Φ50/Φ38) suction port, drawn by a high-pressure centrifugal blower (frequency-division motor with closed-loop control).

3Stage 1: 4 pleated filter cartridges with large surface area trap macro particles; pulse-jet auto-cleaning maintains filter performance during operation.

4Optional fire-resistant or high-temperature cartridges, pre-cyclone separator, and universal suction arm available.

5Stage 2: Coconut-shell activated carbon filter (no carbon leakage, uniform distribution) + HEPA filter for chemical vapors and sub-micron particles.

6Stage 3 (E option): Aluminum-alloy frame pleated HEPA filter, ≥99% efficiency at 0.3 µm.

Caractéristiques techniques

Caractéristiques de la variante : SED-0 this model

Caractéristiques

Modèle

SED-0.6XCQ-C

Tension

AC 220 V single-phase, 50 Hz, 3.8 A rated current

Fluides et énergie

AC 220 V single-phase / 50 Hz / 3.8 A rated current / 600 W. Supplied with 1.5 m national-standard power cord. No compressed air, steam, or water required.

Détails de conformité

Designed for use in Pollution Degree II environments and Overvoltage Category II equipment fed from the electrical-distribution network (appliances, portable tools, household-similar loads). For applications requiring extra safety/reliability, Overvoltage Category III applies. Not suitable for areas with flammable, explosive, or corrosive gas/smoke/vapor accumulation.

Puissance

0.6 kW

Pression d’air

Max static pressure 4.8 kPa

Dimensions

Longueur

400 mm

Largeur

400 mm

Hauteur

1050 mm

Poids

30.5 kg

Emprise au sol

400 (L) × 400 (W) × 1050 (H) mm; weight 30.5 kg. Can be placed under or beside equipment.

Matériaux

Matériaux du bâti

Aluminum alloy (HEPA filter frame and blower casing)

Caractéristiques principales

Three-stage filtration: 4 pleated cartridges + coconut-shell carbon + HEPA (+ optional Al-frame pleated HEPA ≥99% at 0.3 µm)

Pleated cartridge design with automatic pulse-jet self-cleaning during operation

Coconut-shell activated carbon — no carbon leakage, no clumping, high adsorption capacity

Centrifugal blower with frequency-division closed-loop control — high suction, compact size

Maximum airflow 5.8 m³/min, maximum static pressure 4.8 kPa

Suction adjustable; status LEDs indicate filter condition and machine anomalies

Remote control interface: 8 signal points (air-pressure output, remote start enable, filter-blockage signal, run status, overload status, remote/local switch, DC12V output, GND)

PLC / lower-machine linkage for automation line integration

Dimensions 400 × 400 × 1050 mm; weight 30.5 kg; nozzle Φ65 mm standard

Half the volume, double the suction of comparable competitor units (same power class)

Embeds under equipment or into MES automation lines — minimal floor space

Adjustable suction + remote control / PLC linkage for unmanned laser workflows

Three-stage filtration handles both particulates and chemical fumes in a single unit

Applications

Laser marking fume extraction

Precision cutting smoke/dust collection

Special-plastic welding fume extraction

Laser soldering fume extraction

Laser cleaning fume extraction

Point-of-use dust/smoke collection in clean rooms

Secteurs

Electronics components

Automation equipment

Semiconductor manufacturing

Automotive parts

Mobile phone parts and LCD displays

Aerospace

Fabrication pharmaceutique

Scientific laboratories

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

Pleated cartridge filters are pulse-jet auto-cleaned during operation. Replaceable consumables: primary cartridge DH140200 (×4); secondary/tertiary filter HP310H50. Status LEDs on the control panel indicate when each filter stage requires replacement. Do NOT use the purifier to collect: flammable substances (gasoline, thinner, benzene, kerosene, paint), explosive dusts (aluminum, magnesium, titanium, zinc, epoxy resin, cobalt powder, carbon black, flour, tobacco, oils, pharmaceuticals or other liquid aerosols), or corrosive gases (ozone, formic acid, HCl).