Início / Equipamentos / Câmara de esterilização por banho de água / Water-Bath (Superheated Water Spray) Sterilizer — 0.6 m³, Motorized Double-Door
SED-0.6SM-J
Consultar
SED-0.6SM-J
SED · SED-0.6SM-J · Em destaque
SED-0.6SM-J — 0.6 m³, Motorized Double-Door
A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English
SED-0.6SM-J Water-Bath Sterilizer (Superheated Water / Spray type). Airtight, double-leaf motorized doors, double-door interlock and pressure safety interlock. Horizontal double-layer construction; inner shell SS304 6 mm
Escolher variante (1)
Prazo de entrega
Consultar
Capacidade de produção
70–75 minutes/cycle
Como funciona
Closed-loop superheated water spray (water-bath) sterilization. Internal water circulation: water from chamber bottom → WILO Germany circulation pump → plate heat exchanger (Jiangsu Yuanzhuo) internal channel → top spray system via Sparying USA spiral nozzles. External heating/cooling: steam (heating) or cooling water flows through plate-exchanger external channel, indirectly raises/lowers internal water temperature without mixing. Counter-pressure/anti-pressure protection tracks sealed-package internal pressure to prevent breakage and deformation. Cycle: Auto-test → Fill to set water level → Spray circulation → Heat up → Sterilize (F0 or temperature/time) → Cool → Drain (optional) → End.
Processo de funcionamento
1Closed-loop superheated water spray (water-bath) sterilization.
2Internal water circulation: water from chamber bottom → WILO Germany circulation pump → plate heat exchanger (Jiangsu Yuanzhuo) internal channel → top spray system via Sparying USA spiral nozzles.
3External heating/cooling: steam (heating) or cooling water flows through plate-exchanger external channel, indirectly raises/lowers internal water temperature without mixing.
4Counter-pressure/anti-pressure protection tracks sealed-package internal pressure to prevent breakage and deformation.
5Cycle: Auto-test → Fill to set water level → Spray circulation → Heat up → Sterilize (F0 or temperature/time) → Cool → Drain (optional) → End.
Especificações técnicas
Especificações da variante: SED-0 this model
Especificações
Modelo
SED-0.6SM-J
Capacidade de produção
70–75 minutes/cycle
Tensão
AC 380 V, 50 Hz, 3-phase 5-wire
Utilidades
Electricity: AC 380 V / 50 Hz / 3-phase 5-wire / ~2.5 kWh per cycle. Boiler steam 0.4–0.6 MPa, ~35 kg/cycle. Drinking water 0.1–0.3 MPa, ~500 kg/cycle. Compressed air 0.5–0.7 MPa.
Detalhes de conformidade
Pressure vessel per GB150-2011 with X-ray flaw inspection and full labor-ministry quality certification. Standard GMP authentication/validation interface. Free on-site GMP validation using imported Danish Ellab validation equipment supplied by the vendor.
Potência
2.5 kW
Pressão de ar
Boiler steam 0.4-0.6 MPa; compressed air 0.5-0.7 MPa; drinking water 0.1-0.3 MPa
Dimensões
Comprimento
1330 mm
Largura
1650 mm
Altura
1920 mm
Peso
1200 kg
Área de instalação
Outside dimensions 1,330 (L) × 1,650 (W) × 1,920 (H) mm; net weight 1,200 kg. Pass-through double-leaf — install in wall between sterile and prep zones.
Materiais
Materiais de contato
SS304 inner chamber 6 mm welded — SS304 door plate 8 mm — SS304 sawtooth door rack — SS304 sterilization cart and transport carts — Jiangsu Yuanzhuo plate heat exchanger plates (stainless steel) — medical silicone rubber door gasket — 304 sanitary-clamp piping.
Materiais do corpo
SS304 inner shell 6 mm — Q345R 6 mm pressure-vessel reinforcement plate — SS304 1.2 mm oil-mill drawn outer cover — 50 mm aluminum-silicate insulation.
Características principais
Chamber 1,050 × 680 × 850 mm (~0.6 m³); 1 SS304 sieve plate / cart included
Working 0.22 MPa @ 60–134°C; design 0.245 MPa @ 139°C; heat uniformity ≤±1°C; cycle 70–75 min
Inner shell SS304 6 mm welded; Q345R 6 mm pressure-vessel reinforcement; outer SS304 1.2 mm oil-mill drawn
50 mm aluminum-silicate insulation
Door plate 8 mm SS304; sawtooth rack SS304; medical silicone compressed-air gasket
Siemens S7-200 PLC; TRE Taiwan touchscreen with curve printing
Beijing Weihuang micro printer (EPSON chip; F0 + temperature + time + pressure report + trend chart)
HUBA Switzerland pressure transmitter; Shenzhen Kexin Pt100 dual-core Class A probe (≤0.15°C)
WILO Germany circulating pump
Jiangsu Yuanzhuo plate heat exchanger
ASCO USA angle-seat pneumatic valves (4 M cycles)
Sparying USA spiral spray nozzles
Per GB150-2011; X-ray flaw inspected; free on-site GMP validation with Danish Ellab instrument
Vendor includes free commissioning, training, AND on-site GMP validation with Danish Ellab equipment — major value-add
Superheated water spray with Sparying USA nozzles — gentle on glass/plastic packaging
WILO Germany circulating pump — superior reliability and seal life
All-imported quality components: ASCO USA valves, WILO Germany pump, HUBA Switzerland transmitter, Sparying USA nozzles, Siemens PLC
Q345R pressure-vessel-grade reinforcement + GB150-2011 compliant
Wide temperature range 60–134°C
F0 + temperature/time dual sterilization monitoring with full printed report
Aplicações
Sterilization of glass-bottle, ampoule, plastic-bottle, and plastic-soft-bag pharmaceutical liquids
Pharma terminal sterilization with controlled cooling for plastic-packaged solutions
Sealed-package drink and canned-food sterilization
Pharmaceutical injectable liquid preparations
Food and beverage industry sterilization
Setores
Pharmaceutical manufacturing (injectables / liquid preparations)
Food and beverage industry
Medical device sterilization
Hospitals and research institutes
Marcas dos componentes
Siemens Germany — S7-200 PLC
TRE Taiwan — touchscreen with curve printing
Beijing Weihuang (Brighten) — micro printer (original EPSON chip)
Shenzhen Kexin — Pt100 dual-core probe (Class A, ≤0.15°C)
HUBA Switzerland — pressure transmitter
ASCO USA — angle-seat pneumatic valve (4 M cycles)
WILO Germany — circulating pump
Jiangsu Yuanzhuo — plate heat exchanger
AirTAC Taiwan — solenoid valve
Beijing Brady — pressure gauge
Zhejiang Guangyi — safety valve
Sparying USA — spiral spray nozzles
STERLING Germany — water-ring vacuum pump
SED
Fale com SED Sales Team
Especialistas em equipamentos · contato pelo WhatsApp
Consulte o horário e a disponibilidade da equipe
Conformidade
Designed per GB150-2011 (Steel Pressure Vessel) compliant
X-ray flaw-detection inspection with full labor-ministry quality certification
Standard GMP authentication interface; free on-site GMP validation included with Danish Ellab instrument
Limpeza e manutenção
Plate heat exchanger plates are interchangeable for easy cleaning. SUS304 chamber inner surface mechanically and chemically polished. Sparying USA spiral nozzles self-clear with high water flux. Outer SS304 1.2 mm oil-mill drawn cover wipes clean.
Documentação
Ficha técnica (PDF)
Visão geral do equipamento, especificações e dimensões · Documento original (inglês)
Solicitar à equipe de vendas
Manual do operador
Instalação, operação e diagnóstico · Documento original (inglês)
Solicitar à equipe de vendas
Folha comparativa (Padrão e Econômica)
Comparação das configurações · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos IQ / OQ / PQ
Documentação de validação para conformidade GMP · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos FAT / SAT
Testes de aceitação na fábrica e no local · Documento original (inglês)
Solicitar à equipe de vendas
Desenhos CAD (STEP / IGES / DWG)
Desenhos de engenharia para a instalação · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de calibração
Nível sonoro, resistência de terra, rigidez dielétrica e rugosidade · Documento original (inglês)
Solicitar à equipe de vendas
DQ (qualificação do projeto)
Protocolo completo de qualificação do projeto · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de materiais
Composição do aço inoxidável 316L · Documento original (inglês)
Solicitar à equipe de vendas