Accueil / Équipements / Armoire de stérilisation à bain d’eau / Water-Bath (Superheated Water Spray) Sterilizer — 0.6 m³, Motorized Double-Door

SED-0.6SM-J

Sur devis

SED-0.6SM-J

SED · SED-0.6SM-J · En vedette

SED-0.6SM-J — 0.6 m³, Motorized Double-Door

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-0.6SM-J Water-Bath Sterilizer (Superheated Water / Spray type). Airtight, double-leaf motorized doors, double-door interlock and pressure safety interlock. Horizontal double-layer construction; inner shell SS304 6 mm

Designed per GB150-2011 (Steel Pressure Vessel) compliantX-ray flaw-detection inspection with full labor-ministry quality certificationStandard GMP authentication interface; free on-site GMP validation included with Danish Ellab instrument

Choisir une variante (1)

Délai de livraison

Sur devis

Cadence

70–75 minutes/cycle

Fonctionnement

Closed-loop superheated water spray (water-bath) sterilization. Internal water circulation: water from chamber bottom → WILO Germany circulation pump → plate heat exchanger (Jiangsu Yuanzhuo) internal channel → top spray system via Sparying USA spiral nozzles. External heating/cooling: steam (heating) or cooling water flows through plate-exchanger external channel, indirectly raises/lowers internal water temperature without mixing. Counter-pressure/anti-pressure protection tracks sealed-package internal pressure to prevent breakage and deformation. Cycle: Auto-test → Fill to set water level → Spray circulation → Heat up → Sterilize (F0 or temperature/time) → Cool → Drain (optional) → End.

Processus de fonctionnement

1Closed-loop superheated water spray (water-bath) sterilization.

2Internal water circulation: water from chamber bottom → WILO Germany circulation pump → plate heat exchanger (Jiangsu Yuanzhuo) internal channel → top spray system via Sparying USA spiral nozzles.

3External heating/cooling: steam (heating) or cooling water flows through plate-exchanger external channel, indirectly raises/lowers internal water temperature without mixing.

4Counter-pressure/anti-pressure protection tracks sealed-package internal pressure to prevent breakage and deformation.

5Cycle: Auto-test → Fill to set water level → Spray circulation → Heat up → Sterilize (F0 or temperature/time) → Cool → Drain (optional) → End.

Caractéristiques techniques

Caractéristiques de la variante : SED-0 this model

Caractéristiques

Modèle

SED-0.6SM-J

Cadence

70–75 minutes/cycle

Tension

AC 380 V, 50 Hz, 3-phase 5-wire

Fluides et énergie

Electricity: AC 380 V / 50 Hz / 3-phase 5-wire / ~2.5 kWh per cycle. Boiler steam 0.4–0.6 MPa, ~35 kg/cycle. Drinking water 0.1–0.3 MPa, ~500 kg/cycle. Compressed air 0.5–0.7 MPa.

Détails de conformité

Pressure vessel per GB150-2011 with X-ray flaw inspection and full labor-ministry quality certification. Standard GMP authentication/validation interface. Free on-site GMP validation using imported Danish Ellab validation equipment supplied by the vendor.

Puissance

2.5 kW

Pression d’air

Boiler steam 0.4-0.6 MPa; compressed air 0.5-0.7 MPa; drinking water 0.1-0.3 MPa

Dimensions

Longueur

1330 mm

Largeur

1650 mm

Hauteur

1920 mm

Poids

1200 kg

Emprise au sol

Outside dimensions 1,330 (L) × 1,650 (W) × 1,920 (H) mm; net weight 1,200 kg. Pass-through double-leaf — install in wall between sterile and prep zones.

Matériaux

Matériaux en contact

SS304 inner chamber 6 mm welded — SS304 door plate 8 mm — SS304 sawtooth door rack — SS304 sterilization cart and transport carts — Jiangsu Yuanzhuo plate heat exchanger plates (stainless steel) — medical silicone rubber door gasket — 304 sanitary-clamp piping.

Matériaux du bâti

SS304 inner shell 6 mm — Q345R 6 mm pressure-vessel reinforcement plate — SS304 1.2 mm oil-mill drawn outer cover — 50 mm aluminum-silicate insulation.

Caractéristiques principales

Chamber 1,050 × 680 × 850 mm (~0.6 m³); 1 SS304 sieve plate / cart included

Working 0.22 MPa @ 60–134°C; design 0.245 MPa @ 139°C; heat uniformity ≤±1°C; cycle 70–75 min

Inner shell SS304 6 mm welded; Q345R 6 mm pressure-vessel reinforcement; outer SS304 1.2 mm oil-mill drawn

50 mm aluminum-silicate insulation

Door plate 8 mm SS304; sawtooth rack SS304; medical silicone compressed-air gasket

Siemens S7-200 PLC; TRE Taiwan touchscreen with curve printing

Beijing Weihuang micro printer (EPSON chip; F0 + temperature + time + pressure report + trend chart)

HUBA Switzerland pressure transmitter; Shenzhen Kexin Pt100 dual-core Class A probe (≤0.15°C)

WILO Germany circulating pump

Jiangsu Yuanzhuo plate heat exchanger

ASCO USA angle-seat pneumatic valves (4 M cycles)

Sparying USA spiral spray nozzles

Per GB150-2011; X-ray flaw inspected; free on-site GMP validation with Danish Ellab instrument

Vendor includes free commissioning, training, AND on-site GMP validation with Danish Ellab equipment — major value-add

Superheated water spray with Sparying USA nozzles — gentle on glass/plastic packaging

WILO Germany circulating pump — superior reliability and seal life

All-imported quality components: ASCO USA valves, WILO Germany pump, HUBA Switzerland transmitter, Sparying USA nozzles, Siemens PLC

Q345R pressure-vessel-grade reinforcement + GB150-2011 compliant

Wide temperature range 60–134°C

F0 + temperature/time dual sterilization monitoring with full printed report

Applications

Sterilization of glass-bottle, ampoule, plastic-bottle, and plastic-soft-bag pharmaceutical liquids

Pharma terminal sterilization with controlled cooling for plastic-packaged solutions

Sealed-package drink and canned-food sterilization

Pharmaceutical injectable liquid preparations

Food and beverage industry sterilization

Secteurs

Pharmaceutical manufacturing (injectables / liquid preparations)

Food and beverage industry

Medical device sterilization

Hospitals and research institutes

Marques des composants

Siemens Germany — S7-200 PLC

TRE Taiwan — touchscreen with curve printing

Beijing Weihuang (Brighten) — micro printer (original EPSON chip)

Shenzhen Kexin — Pt100 dual-core probe (Class A, ≤0.15°C)

HUBA Switzerland — pressure transmitter

ASCO USA — angle-seat pneumatic valve (4 M cycles)

WILO Germany — circulating pump

Jiangsu Yuanzhuo — plate heat exchanger

AirTAC Taiwan — solenoid valve

Beijing Brady — pressure gauge

Zhejiang Guangyi — safety valve

Sparying USA — spiral spray nozzles

STERLING Germany — water-ring vacuum pump

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

Designed per GB150-2011 (Steel Pressure Vessel) compliant

X-ray flaw-detection inspection with full labor-ministry quality certification

Standard GMP authentication interface; free on-site GMP validation included with Danish Ellab instrument

Nettoyage et entretien

Plate heat exchanger plates are interchangeable for easy cleaning. SUS304 chamber inner surface mechanically and chemically polished. Sparying USA spiral nozzles self-clear with high water flux. Outer SS304 1.2 mm oil-mill drawn cover wipes clean.