Início / Equipamentos / Secador contínuo de leito fluidizado vibratório ZGF (inclui resfriamento LZGF / granulação por aspersão PZGF) / Linear Vibrating Fluidized Bed Dryer — SED-0.3-3ZGF-T
SED-0.3-3ZGF-T
Consultar
SED-0.3-3ZGF-T
SED · SED-0.3-3ZGF-T · Em destaque
SED-0.3-3ZGF-T
A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English
SED-0.3-3ZGF-T is a 0.9 m² linear vibrating fluidized bed dryer with 48 kW group-controlled electric air heater, 2.2 kW VFD supply blower, 5.5 kW induced-draft fan and XF-0.5 cyclone dust separator. Total installed power
Escolher variante (1)
Prazo de entrega
Consultar
Capacidade de produção
0.9 m2
Como funciona
Material enters the feed port and is transported horizontally by the vibration force of two 0.75 kW motors across the fluidized bed surface. Hot air (0–150 °C) passes through the primary and intermediate polyester non-woven filters, is heated by the 48 kW electric heater, enters the lower plenum and distributes evenly through the bed mesh, fluidising the material and exchanging heat. Moist exhaust air is dust-removed in the XF-0.5 cyclone separator and discharged by the induced-draft fan. Dried product exits the discharge port. Three DN120 sight glasses (316 SS/glass), and temperature and pressure ports allow process monitoring.
Processo de funcionamento
1Material enters the feed port and is transported horizontally by the vibration force of two 0.75 kW motors across the fluidized bed surface.
2Hot air (0–150 °C) passes through the primary and intermediate polyester non-woven filters, is heated by the 48 kW electric heater, enters the lower plenum and distributes evenly through the bed mesh, fluidising the material and exchanging heat.
3Moist exhaust air is dust-removed in the XF-0.5 cyclone separator and discharged by the induced-draft fan.
4Dried product exits the discharge port.
5Three DN120 sight glasses (316 SS/glass), and temperature and pressure ports allow process monitoring.
Especificações técnicas
Especificações da variante: SED-0 0.9 m² linear vibrating fluidized bed dryer (sister models: SED-0.3-3LZGF-T cooling unit
Especificações
Modelo
SED-0.3-3ZGF-T
Capacidade de produção
0.9 m2
Utilidades
Electric power 57.2 kW total (48 kW electric heater + 2.2 kW blower + 5.5 kW fan + 1.5 kW motors). No steam required (electric heating standard); compressed air for instrumentation if applicable.
Detalhes de conformidade
Material-contact SS304 suitable for pharmaceutical and food applications. Polyester non-woven primary + intermediate air filtration. No specific certification standard cited.
Potência
57.2 kW
Pressão de ar
Slight negative pressure (operating)
Dimensões
Área de instalação
Modular skid: hopper + main fluidised bed (0.9 m²) + cyclone XF-0.5 + induced-draft fan + control cabinet. Overall dimensions not stated in source.
Materiais
Materiais de contato
SS304 stainless steel (bed mesh, upper cover, hopper, movable baffle, sight-glass housing)
Materiais do corpo
SS304 (product-contact) / Q235A (non-contact body, cyclone body, ducting) / aluminium-silicate (insulation) / rubber (12 shock absorbers) / carbon steel painted (control cabinet)
Características principais
Drying area 0.9 m²
Total installed power 57.2 kW
Electric air heater 48 kW with group control
Supply blower 2.2 kW with VFD (frequency-conversion speed regulation)
Induced-draft fan 5.5 kW
Two vibration motors 0.75 kW each
Hot-air temperature 0–150 °C
Slight negative-pressure operation
12 rubber shock absorbers under the main unit
Three DN120 sight glasses (316 SS / glass)
Primary + intermediate polyester non-woven air filters (S = 6 m²)
Cyclone separator XF-0.5
Material-contact SS304, non-contact Q235A
Aluminium-silicate insulation around the fluidised bed body
5 canvas soft connections for vibration isolation
Saves 30%+ energy vs conventional dryers thanks to vibration-enhanced fluidisation
Stable, low-noise vibration drive — long service life, easy maintenance
Adjustable bed depth, material transport speed and amplitude (stepless within design range)
Gentle on fragile or irregular particles — minimal surface damage
Fully enclosed structure prevents cross-contamination
Chint (Zhejiang) electrical components; SS304 product-contact construction
1-year warranty + lifetime maintenance service
Aplicações
Drying of pharmaceutical granules (post wet-granulation)
Drying, cooling or humidification of food granules and powders
Drying of chemical and fine-chemical particles
Drying of fragile or irregular particle materials
Setores
Pharmaceutical solid dose
Food and beverage processing
Fine chemical manufacturing
Nutraceuticals
Marcas dos componentes
Chint (Zhejiang) — electrical components in control cabinet
National standard — vibration motors
SED
Fale com SED Sales Team
Especialistas em equipamentos · contato pelo WhatsApp
Consulte o horário e a disponibilidade da equipe
Conformidade
1-year machine warranty since installation (no more than 16 months after delivery)
Limpeza e manutenção
Removable upper cover, sight glasses and bed mesh allow manual access for cleaning. SS304 wetted surfaces. Specific CIP cycle not described in source.
Documentação
Ficha técnica (PDF)
Visão geral do equipamento, especificações e dimensões · Documento original (inglês)
Solicitar à equipe de vendas
Manual do operador
Instalação, operação e diagnóstico · Documento original (inglês)
Solicitar à equipe de vendas
Folha comparativa (Padrão e Econômica)
Comparação das configurações · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos IQ / OQ / PQ
Documentação de validação para conformidade GMP · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos FAT / SAT
Testes de aceitação na fábrica e no local · Documento original (inglês)
Solicitar à equipe de vendas
Desenhos CAD (STEP / IGES / DWG)
Desenhos de engenharia para a instalação · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de calibração
Nível sonoro, resistência de terra, rigidez dielétrica e rugosidade · Documento original (inglês)
Solicitar à equipe de vendas
DQ (qualificação do projeto)
Protocolo completo de qualificação do projeto · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de materiais
Composição do aço inoxidável 316L · Documento original (inglês)
Solicitar à equipe de vendas