Accueil / Équipements / Sécheur continu à lit fluidisé vibrant ZGF (avec refroidissement LZGF / granulation par pulvérisation PZGF) / Linear Vibrating Fluidized Bed Dryer — SED-0.3-3ZGF-T

SED-0.3-3ZGF-T

Sur devis

SED-0.3-3ZGF-T

SED · SED-0.3-3ZGF-T · En vedette

SED-0.3-3ZGF-T

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-0.3-3ZGF-T is a 0.9 m² linear vibrating fluidized bed dryer with 48 kW group-controlled electric air heater, 2.2 kW VFD supply blower, 5.5 kW induced-draft fan and XF-0.5 cyclone dust separator. Total installed power

1-year machine warranty since installation (no more than 16 months after delivery)

Choisir une variante (1)

Délai de livraison

Sur devis

Cadence

0.9 m2

Fonctionnement

Material enters the feed port and is transported horizontally by the vibration force of two 0.75 kW motors across the fluidized bed surface. Hot air (0–150 °C) passes through the primary and intermediate polyester non-woven filters, is heated by the 48 kW electric heater, enters the lower plenum and distributes evenly through the bed mesh, fluidising the material and exchanging heat. Moist exhaust air is dust-removed in the XF-0.5 cyclone separator and discharged by the induced-draft fan. Dried product exits the discharge port. Three DN120 sight glasses (316 SS/glass), and temperature and pressure ports allow process monitoring.

Processus de fonctionnement

1Material enters the feed port and is transported horizontally by the vibration force of two 0.75 kW motors across the fluidized bed surface.

2Hot air (0–150 °C) passes through the primary and intermediate polyester non-woven filters, is heated by the 48 kW electric heater, enters the lower plenum and distributes evenly through the bed mesh, fluidising the material and exchanging heat.

3Moist exhaust air is dust-removed in the XF-0.5 cyclone separator and discharged by the induced-draft fan.

4Dried product exits the discharge port.

5Three DN120 sight glasses (316 SS/glass), and temperature and pressure ports allow process monitoring.

Caractéristiques techniques

Caractéristiques de la variante : SED-0 0.9 m² linear vibrating fluidized bed dryer (sister models: SED-0.3-3LZGF-T cooling unit

Caractéristiques

Modèle

SED-0.3-3ZGF-T

Cadence

0.9 m2

Fluides et énergie

Electric power 57.2 kW total (48 kW electric heater + 2.2 kW blower + 5.5 kW fan + 1.5 kW motors). No steam required (electric heating standard); compressed air for instrumentation if applicable.

Détails de conformité

Material-contact SS304 suitable for pharmaceutical and food applications. Polyester non-woven primary + intermediate air filtration. No specific certification standard cited.

Puissance

57.2 kW

Pression d’air

Slight negative pressure (operating)

Dimensions

Emprise au sol

Modular skid: hopper + main fluidised bed (0.9 m²) + cyclone XF-0.5 + induced-draft fan + control cabinet. Overall dimensions not stated in source.

Matériaux

Matériaux en contact

SS304 stainless steel (bed mesh, upper cover, hopper, movable baffle, sight-glass housing)

Matériaux du bâti

SS304 (product-contact) / Q235A (non-contact body, cyclone body, ducting) / aluminium-silicate (insulation) / rubber (12 shock absorbers) / carbon steel painted (control cabinet)

Caractéristiques principales

Drying area 0.9 m²

Total installed power 57.2 kW

Electric air heater 48 kW with group control

Supply blower 2.2 kW with VFD (frequency-conversion speed regulation)

Induced-draft fan 5.5 kW

Two vibration motors 0.75 kW each

Hot-air temperature 0–150 °C

Slight negative-pressure operation

12 rubber shock absorbers under the main unit

Three DN120 sight glasses (316 SS / glass)

Primary + intermediate polyester non-woven air filters (S = 6 m²)

Cyclone separator XF-0.5

Material-contact SS304, non-contact Q235A

Aluminium-silicate insulation around the fluidised bed body

5 canvas soft connections for vibration isolation

Saves 30%+ energy vs conventional dryers thanks to vibration-enhanced fluidisation

Stable, low-noise vibration drive — long service life, easy maintenance

Adjustable bed depth, material transport speed and amplitude (stepless within design range)

Gentle on fragile or irregular particles — minimal surface damage

Fully enclosed structure prevents cross-contamination

Chint (Zhejiang) electrical components; SS304 product-contact construction

1-year warranty + lifetime maintenance service

Applications

Drying of pharmaceutical granules (post wet-granulation)

Drying, cooling or humidification of food granules and powders

Drying of chemical and fine-chemical particles

Drying of fragile or irregular particle materials

Secteurs

Pharmaceutical solid dose

Food and beverage processing

Fine chemical manufacturing

Nutraceuticals

Marques des composants

Chint (Zhejiang) — electrical components in control cabinet

National standard — vibration motors

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

1-year machine warranty since installation (no more than 16 months after delivery)

Nettoyage et entretien

Removable upper cover, sight glasses and bed mesh allow manual access for cleaning. SS304 wetted surfaces. Specific CIP cycle not described in source.