Accueil / Équipements / Machine d’alimentation / Pneumatic Feeding Machine (Loading Pump)

SED-SLJ-H

Sur devis

SED · SED-SLJ-H · 1 unités vendues

SED-SLJ-H — Pneumatic Feeding Machine

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-SLJ-H pneumatic feeding machine (loading pump). Cylinder-driven piston pump that lifts and discharges low-to-medium-viscosity liquid and paste materials — typically used to feed a downstream filling line or storage h

Délai de livraison

Sur devis

Cadence

20 L/min

Fonctionnement

Compressed air (0.4–0.8 MPa, set to 0.5 MPa) drives the main piston cylinder (80×200 mm). On the suction stroke, material is drawn through a stainless suction tube into the material cylinder; pneumatic mechanical and reed switches reverse the cylinder, and on the discharge stroke material is forced out through a stainless tee into the downstream hopper or filling head. Adjustable feed-rate and discharge-rate valves let the operator tune pumping speed and discharge pace to material viscosity.

Processus de fonctionnement

1Compressed air (0.4–0.8 MPa, set to 0.5 MPa) drives the main piston cylinder (80×200 mm).

2On the suction stroke, material is drawn through a stainless suction tube into the material cylinder; pneumatic mechanical and reed switches reverse the cylinder, and on the discharge stroke material is forced out through a stainless tee into the downstream hopper or filling head.

3Adjustable feed-rate and discharge-rate valves let the operator tune pumping speed and discharge pace to material viscosity.

Caractéristiques techniques

Caractéristiques de la variante : SED-SLJ-H

Caractéristiques

Modèle

SED-SLJ-H

Cadence

20 L/min

Tension

Pneumatic (no electrical supply required)

Fluides et énergie

Compressed air 0.4–0.8 MPa (typical 0.5 MPa); air consumption depends on stroke rate. No electrical supply required.

Pression d’air

0.5 MPa typical (range 0.4-0.8 MPa per safety note)

Dimensions

Longueur

450 mm

Largeur

450 mm

Hauteur

1600 mm

Poids

40 kg

Emprise au sol

450×450 mm bench/floor footprint, 1600 mm tall (height customizable to feed-hopper height). ~40 kg.

Matériaux

Matériaux en contact

Stainless steel material cylinder; SS tee; piston seal ring 80×5.7; PU air tubing 8 mm

Matériaux du bâti

Stainless steel housing; wear-, acid- and high-temperature-resistant SS wetted parts

Caractéristiques principales

Pneumatically actuated — no electrical wiring in the wet area

Throughput ~20 L/min (water test); slower for thicker pastes

Suitable for liquids and pastes (viscosity-dependent)

Hopper height customizable to suit downstream filler / mixer

Compact 450×450 mm footprint, ~40 kg

Easily dismantled material cylinder and SS tee for cleaning

Adjustable feed-rate and discharge-rate valves

Air-source pressure regulator and filter built in

Standard pneumatic components (cylinder 80×200, S3B-M5 mechanical valve, TG2522A-08 pneumatic control valve, ASC-08 regulator, 3R210-06 auto switch, NAL2000 filter)

Pneumatic-only — safe and ATEX-friendly for solvents, alcohol, oils and many pharma intermediates

Cleans down by hand without electrical risk; no lubricant added field-side

Cheap-to-spare — standard 80×200 cylinder, ASC and SMC-style fittings

Pairs with SED filling lines as a sanitary feed pump

Hopper-height customization fits any downstream tank-to-filler integration

Applications

Feeding low-to-medium-viscosity liquids and pastes into a downstream filling line

Transferring product from storage tank to surge hopper above a filler

Pneumatic loading for cosmetic creams, gels and lotions

Pneumatic loading for sauces, syrups and food pastes

Pharmaceutical liquids and ointments transfer in cleanrooms

Secteurs

Fabrication pharmaceutique

Cosmetics / personal care

Agroalimentaire et boissons

Daily-chemical / household chemical

Pesticide / agro-chemical

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

Cut the air supply before dismantling. Do not spray water directly on the body to protect pneumatic controls. Wipe stainless surfaces with alcohol; do not scrape with hard/sharp objects. Material cylinder and SS tee are designed for quick removal and washing. Replace worn seals (80×5.7 piston seal, 63 mm gasket) promptly. Do not disassemble or oil the air cylinder — factory-lubricated.