Accueil / Équipements / Remplisseuse-scelleuse de jus / Jelly Stick / Popsicle Tube Automatic Filling & Sealing Machine

SED-6GDGF-A

Sur devis

SED-6GDGF-A

SED · SED-6GDGF-A · En vedette

SED-6GDGF-A — Jelly Stick / Popsicle Tube Automatic Filling & Sealing Machine

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-6GDGF-A is a stepping intermittent rotary filling and sealing machine for jelly-stick / popsicle tube-mouth bottles. Workflow: VFD-driven stepping rotary table → manual bottle-hanging → double-shot quantitative filli

Délai de livraison

Sur devis

Cadence

6000–8000 flacons/h

Fonctionnement

Operator manually hangs empty popsicle/jelly-stick tube bottles onto the indexing rotary table that steps under VFD speed control (cam splitter + worm-gear reducer). Bottles index through double-shot copper-piston filling stations (liquid level maintained by float switch), bubble-knock, nozzle-rinse, dual-zone heating, then into the double-action pneumatic press-seal station where a proprietary needle mechanism seals the tube mouth. Finished bottles auto-discharge to outfeed. All timing is controlled by cam + pneumatic circuits.

Processus de fonctionnement

1Operator manually hangs empty popsicle/jelly-stick tube bottles onto the indexing rotary table that steps under VFD speed control (cam splitter + worm-gear reducer).

2Bottles index through double-shot copper-piston filling stations (liquid level maintained by float switch), bubble-knock, nozzle-rinse, dual-zone heating, then into the double-action pneumatic press-seal station where a proprietary needle mechanism seals the tube mouth.

3Finished bottles auto-discharge to outfeed.

4All timing is controlled by cam + pneumatic circuits.

Caractéristiques techniques

Caractéristiques de la variante : SED-6GDGF-A

Caractéristiques

Modèle

SED-6GDGF-A

Cadence

6000–8000 flacons/h

Fluides et énergie

Electrical supply for approximately 6 kW total installed power; compressed air 0.7 MPa, approximately 1.2 L/min; clean rinse liquid for nozzle wash station

Puissance

6 kW

Pression d’air

0.7 MPa, ~1.2 L/min

Dimensions

Longueur

4000 mm

Largeur

1200 mm

Hauteur

2000 mm

Matériaux

Matériaux en contact

304 acier inoxydable; wear-resistant copper (filling plungers/pistons); sealing rubber rings

Matériaux du bâti

High-strength channel steel frame clad in 304 stainless steel; 304 stainless steel column panels

Caractéristiques principales

Stepping intermittent rotary indexing with precision cam splitter (Zhucheng Hengrui) and worm-gear reducer (Hangzhou Subolei)

Double-shot filling by wear-resistant copper pistons with liquid-level-controlled feed hopper

Automatic bubble-knock + nozzle rinse station after filling

Dual-zone electric heating (efficiency tubes with insulation jacket)

Double-action pneumatic press sealing — proprietary mechanism optimised for popsicle tubes

VFD speed control for output rate adjustment

Shanlin three-phase motor (stepper drive) + Omron limit switches + Schneider push buttons

Single machine performs hanging-fill-bubble-clean-heat-seal-discharge — no auxiliary stations needed

Output 6 000–8 000 bottles/h — competitive for the popsicle tube packaging segment

Cam + pneumatic control provides accurate, repeatable indexing and sealing

High-strength channel-steel frame clad in 304 stainless steel — durable and hygienic

Applications

Jelly stick / popsicle tube filling and sealing

Bang-bang / push-pop tube bottle packaging

Tube-bottle dosing for juice-based frozen treats

Secteurs

Beverage and juice (jelly stick / fruit-juice popsicle)

Confectionery / frozen treats

Food packaging

Marques des composants

Jiangsu Shilin — three-phase motor (stepper drive)

Hangzhou Subolei — WP worm-gear reducer (stepper)

Zhucheng Hengrui — cam indexer (stepper)

Taiwan AirTAC — air cylinders

Taiwan AirTAC — solenoid valves

Taiwan Delta — inverter (VFD)

Japan Omron — limit switches and intermediate relays

Jiangsu Huibang — temperature controller

Taiwan Yangming — temperature-control module

Zhejiang Zhengtai — air circuit breaker

Shanghai Forte — contactor and thermal overload relay

Schneider — push buttons and selector switches

Shenzhen Kaituo — indicator lights

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →