Accueil / Équipements / Granulateur à sec de capacité moyenne (série GZ, 60–220 kg/h) / Granulateur à sec

SED-60GZ-H

Sur devis

SED-60GZ-H

SED · SED-60GZ-H · En vedette

SED-60GZ-H — Granulateur à sec

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-60GZ-H Dry Granulator. Uses crystal water in the material to directly compact powder into granules — eliminates need for liquid binder or secondary drying. Capacity 20-60 kg/h, granule size 0.5-2 mm. Roller Ø200×80 m

Choisir une variante (5)

Délai de livraison

Sur devis

Cadence

20–60 kg/h

Fonctionnement

Powder is fed via electromagnetic-speed-regulated downward feeder into the compaction zone where two counter-rotating rollers (Ø200×80 mm) compress it into flakes using 10×2 T (≈20 kN) of force, leveraging the material's crystal water as binder. The hydraulic system runs at up to 20 MPa working pressure. Roller cooling water circulation (water temp 20-45 °C, tap water acceptable) prevents sticky-roll and protects heat-sensitive materials. Compacted flakes are then crushed through a sieve by the granulating motor to produce 0.5-2 mm granules.

Processus de fonctionnement

1Powder is fed via electromagnetic-speed-regulated downward feeder into the compaction zone where two counter-rotating rollers (Ø200×80 mm) compress it into flakes using 10×2 T (≈20 kN) of force, leveraging the material's crystal water as binder.

2The hydraulic system runs at up to 20 MPa working pressure.

3Roller cooling water circulation (water temp 20-45 °C, tap water acceptable) prevents sticky-roll and protects heat-sensitive materials.

4Compacted flakes are then crushed through a sieve by the granulating motor to produce 0.5-2 mm granules.

Caractéristiques techniques

Caractéristiques de la variante : SED-10GZ-H (2-10 kg/h

Caractéristiques

Modèle

SED-60GZ-H

Cadence

20–60 kg/h

Tension

380V 50Hz 3Φ

Fluides et énergie

380V 50Hz 3-phase power; roller cooling water (20-45 °C, tap water acceptable)

Détails de conformité

Sealed operation meets pharmaceutical hygiene requirements. Warranty 12 months from installation, no more than 16 months after delivery.

Puissance

6.95 kW

Matériaux

Matériaux en contact

0Cr26Ni2Mo5 (rollers); 2Cr13Y (roll shafts, conditioned)

Matériaux du bâti

Stainless steel 304 (frame); ZG45 steel (gears, guide rails)

Caractéristiques principales

Dry granulation — no water, ethanol, or other wetting agent required

Roller size Ø200×80 mm, max compaction pressure 10×2 T

Roller speed 2-20 rpm, feeding speed 6-60 rpm — both adjustable

Electromagnetic / variable-frequency speed regulation

Roller cooling water circulation prevents sticky-roll

Hydraulic working pressure up to 20 MPa

Sealed operation meeting pharmaceutical hygiene standards

Stainless steel 304 frame

No secondary heating/drying required

Solves granulation for materials that cannot be wet-granulated

Uniform granule density, good disintegration, high yield

Lower cost — fewer process steps, no drying step

Cooling system protects heat-sensitive APIs

Anti-explosion motor option available for dusty environments

Applications

Pharmaceutical pellet/capsule-fill granules

Tablet pre-compression granulation

Food seasoning and manufacturing particles

Plastic molding particles

Catalysts, pigments, and detergents in chemicals

Secteurs

Pharmaceutique

Food

Chemical

Plastic

Marques des composants

Press/roll motor (4 kW electromagnetic speed regulating) — Market

Tablet reducer BW220 i=29 — Market

Feeding motor (1.1 kW electromagnetic speed regulating) — Market

Feeding reducer BL180 i=29 — Market

Granulation motor (1.1 kW promise-speed) — Market

Hydraulic station (customized 20T, 0.75 kW oil pump) — Market

Jack lifting 5T — Market

Electrical components — Delixi

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

Disassemble and inspect after each shift. Clean and change lubricant oil/grease every 6 months. Full overhaul every 3 years. Do NOT use metal tools to scrape material from press rollers — maintain scraper-to-roller gap at 0.1 mm.