Accueil / Équipements / Grand générateur de vapeur (300-999 kg/h, gaz / fioul / prémélange / électrique haute puissance) / Générateur de vapeur

SED-600ZQ2-T

Sur devis

SED-600ZQ2-T

SED · SED-600ZQ2-T · En vedette

SED-600ZQ2-T — Générateur de vapeur

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

0.6-tonne (600 kg/h) once-through fully-premixed low-NOx gas steam generator. Vertical once-through water-tube structure; thermal efficiency up to 100.35 % (including condensate latent heat recovery). NOx emission <30 mg

Délai de livraison

Sur devis

Cadence

0.6 T/H

Fonctionnement

Once-through structure: feed water first passes through the condenser to absorb flue-gas heat, then enters the lower header and absorbs heat through finned tubes. At approximately the midpoint (~1/2) the water vaporises to steam; the steam passes through the patented steam-water separator in the upper header; saturated steam is discharged while condensate recirculates via 3 once-through tubes back to the lower header. ±0.1° precision premixing of air:fuel ratio 1:9 ensures complete combustion. Italian Bekaert metal-fibre mesh radiant surface burner with flame temperature ~800 °C; low-temperature radiant combustion suppresses NOx formation. DC variable-frequency premix fan (FASCO/AMETEK) provides 9-stage linear output.

Processus de fonctionnement

1Once-through structure: feed water first passes through the condenser to absorb flue-gas heat, then enters the lower header and absorbs heat through finned tubes.

2At approximately the midpoint (~1/2) the water vaporises to steam; the steam passes through the patented steam-water separator in the upper header; saturated steam is discharged while condensate recirculates via 3 once-through tubes back to the lower header.

3±0.1° precision premixing of air:fuel ratio 1:9 ensures complete combustion.

4Italian Bekaert metal-fibre mesh radiant surface burner with flame temperature ~800 °C; low-temperature radiant combustion suppresses NOx formation.

5DC variable-frequency premix fan (FASCO/AMETEK) provides 9-stage linear output.

Caractéristiques techniques

Caractéristiques de la variante : SED-600ZQ2-T

Caractéristiques

Modèle

SED-600ZQ2-T

Cadence

0.6 T/H

Tension

380V 50Hz 3Φ

Détails de conformité

Water capacity <30 L — exempt from boiler/pressure-vessel supervision under 'Boiler Safety Technical Supervision Regulations'; national steam-equipment authority five-star certification; full argon-arc welding.

Puissance

2.2 kW

Pression d’air

1.0 MPa (rated working pressure)

Dimensions

Longueur

1900 mm

Largeur

1100 mm

Hauteur

2300 mm

Poids

1200 kg

Matériaux

Matériaux en contact

316L stainless steel (condenser); alloy boiler steel 5310 + stainless-steel finned tubes (furnace)

Matériaux du bâti

Alloy boiler steel 5310; stainless-steel finned tubes; 316L stainless-steel condenser

Caractéristiques principales

Evaporation capacity: 600 kg/h

Rated working pressure: 1.0 MPa

Thermal efficiency: 100.35 % (including condensate latent heat)

NOx emission: <30 mg/m³

Flue-gas outlet temperature: <65 °C

Nine-stage linear modulation: 20 %–100 % (200–600 kg/h)

Steam-up: 2 min; rated pressure: 5 min

Water capacity <30 L (exempt from boiler registration / operator licence / annual inspection)

Furnace material: alloy boiler steel 5310 + stainless-steel finned tubes

Condenser: 316L stainless steel

Full argon-arc welding

Pld-iPower intelligent control system

7-inch LCD touchscreen + IoT remote monitoring

Steam outlet / combustion air inlet: DN25 flange

Feed-water pump motor: 2.2 kW (LEO Group)

Power supply: 380V

Thermal efficiency 100.35 % — saves ~24.9 % fuel vs. conventional boiler

Exempt from boiler registration, annual inspection, and operator licensing

No boiler operator required — fully automatic one-touch operation

NOx <30 mg/m³, meets strictest Tier-1 city standards

2-minute steam-up — no warm-up energy waste

Comprehensive safety protections: electronic over-pressure, mechanical safety valve, low-water, scale monitoring, earth-leakage, over-heat, flame-out, water-level logic

National steam-equipment five-star certification

Multi-unit group control + remote monitoring

Applications

Pharmaceutical process heating

Moist-heat sterilisation

Steam source for drying equipment

Laundry-industry steam supply

Food-processing steam supply

Chemical reaction vessel heating

Secteurs

Pharmaceutique

Chemical

Food

Laundry

Textile

Marques des composants

Gas proportional valve

Honeywell

Venturi mixer

Honeywell

Gas pressure switch

Honeywell

DC variable-frequency premix fan

FASCO (AMETEK)

Surface burner metal-fibre mesh

Bekaert

Ignition transformer

Danfoss

Feed-water pump (custom)

LEO Group

Circuit breaker / contactor

Schneider

Pressure transmitter

Xuansheng

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →