Accueil / Équipements / Équipements d’osmose inverse / Pharmaceutical Water Treatment System — Two-Stage Reverse Osmosis, 0.5 T/h

SED-500WRO-H

Sur devis

SED-500WRO-H

SED · SED-500WRO-H · 1 unités vendues

SED-500WRO-H — Two-Stage Reverse Osmosis, 0.5 T/h

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-500WRO-H pharmaceutical water-treatment system: 0.5 T/h two-stage reverse osmosis (RO) skid. Includes raw-water tank + level controller + raw-water pump; multimedia pretreatment train (quartz-sand filter, granular ac

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

Raw water is pumped from the raw-water tank through a quartz-sand filter (suspended-solids removal), an activated-carbon filter (chlorine and organics removal), and a softener (Na⁺ ion-exchange to remove Ca/Mg hardness). Water then passes through a 5-μm precision cartridge filter and a 1st-stage high-pressure pump driving Stage-1 RO (3×4040 polyamide membranes in stainless-steel pressure vessels US4040-1). Stage-1 permeate feeds a 2nd-stage high-pressure pump and Stage-2 RO (2×4040 elements). Final permeate is collected in a 0.5 T sterile-water tank, polished by an in-line UV sterilizer, then distributed by a VFD-controlled supply pump. Automatic membrane-flush solenoid valves backwash on cycle.

Processus de fonctionnement

1Raw water is pumped from the raw-water tank through a quartz-sand filter (suspended-solids removal), an activated-carbon filter (chlorine and organics removal), and a softener (Na⁺ ion-exchange to remove Ca/Mg hardness).

2Water then passes through a 5-μm precision cartridge filter and a 1st-stage high-pressure pump driving Stage-1 RO (3×4040 polyamide membranes in stainless-steel pressure vessels US4040-1).

3Stage-1 permeate feeds a 2nd-stage high-pressure pump and Stage-2 RO (2×4040 elements).

4Final permeate is collected in a 0.5 T sterile-water tank, polished by an in-line UV sterilizer, then distributed by a VFD-controlled supply pump.

5Automatic membrane-flush solenoid valves backwash on cycle.

Caractéristiques techniques

Caractéristiques de la variante : SED-500WRO-H

Caractéristiques

Modèle

SED-500WRO-H

Tension

3-phase 4-wire (3-phase 380V + neutral)

Fluides et énergie

Raw water inlet ≥1 m³/h. Electrical: 3-phase 4-wire (3 phase + neutral). Drain within 10 m. Compressed air not required.

Détails de conformité

Designed for pharmaceutical purified-water service. All pretreatment vessels and main process piping in SS304. Fully automatic control with motor phase-loss/overload protection.

Dimensions

Emprise au sol

Skid-mounted system. Customer must provide: raw water source (≥1 m³/h flow); 3-phase 4-wire (3-phase + neutral) power supply; drain within 10 m of equipment.

Matériaux

Matériaux en contact

SS304 (tanks; pressure vessels; piping; valves; precision-filter housing); polyamide (4040 RO membranes); brass (flush solenoid valves); ABS (distributors and end caps); UPVC (center tubes); PPF (cartridge filter elements)

Matériaux du bâti

SS304 frame and vessels; powder-coated electrical cabinet

Caractéristiques principales

Two-stage RO design — high rejection, low conductivity output

Pretreatment train: quartz sand + granular activated carbon + softener (each Φ300×1450 mm SS304 tank with auto-control valve, ABS distributors, UPVC center tube)

20-inch 5-element precision cartridge filter, quick-disconnect, with low-pressure gauge

Stage 1: 3×4040 polyamide RO membranes in SS pressure vessels (US4040-1)

Stage 2: 2×4040 polyamide RO membranes in SS pressure vessels (US4040-1)

Per-stage online conductivity meter, oil-filled vibration-resistant pressure gauges, acrylic flow meters, brass auto-flush solenoid valves

Sterile-water tank 0.5 T, in-line UV sterilizer, VFD-controlled supply pump

Fully automatic operation: motor phase-loss/overload protection, current overload alarm, auto membrane flush

Online ammeter and voltmeter on control panel

Two-stage RO meets pharma purified-water (PW) quality at competitive CapEx

Fully automatic — no operator required for normal running; only daily maintenance needed

Custom RO membranes available from SED

All pressure vessels and main piping in stainless steel

Applications

Pharmaceutical purified-water (PW) production

Process water for injectable, oral solid, or topical manufacturing

Laboratory and research-institute high-purity water

Secteurs

Pharmaceutical (injectable, oral solid, topical)

Cosmetics / daily-chemical

Laboratory and R&D facilities

Marques des composants

Raw-water tank and pretreatment vessels: SS304 in-house (SED)

Level controller: Leida (radar type)

Pumps (raw-water, high-pressure, supply): Nan Pump (stainless-steel)

RO membranes: 4040 polyamide (SED custom)

Pressure vessels US4040-1: stainless steel

Pressure gauges: Yuyao Zhejiang (oil-filled vibration-resistant)

Flow meters: acrylic (rotameter)

Flush solenoid valves: Sanlixin / brass

Conductivity meters: Xianhe (online)

Quartz sand filler: Henan Gongyi (2–10 mm)

Activated carbon: Hebei Chengde (8–12 mesh, fruit-shell)

Softener resin: domestic 001×7

Pipe fittings and valves: Bozhong (SS304)

Electrical components: Delixi

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

Automatic membrane-flush via solenoid valves on each RO stage. Manual daily maintenance required: cartridge filter element replacement as needed, tank inspection, log conductivity readings per stage.