Inicio / Equipos / Equipos de ósmosis inversa / Pharmaceutical Water Treatment System — Two-Stage Reverse Osmosis, 0.5 T/h
SED-500WRO-H
Consultar
SED-500WRO-H
SED · SED-500WRO-H · 1 unidades vendidas
SED-500WRO-H — Two-Stage Reverse Osmosis, 0.5 T/h
La descripción completa de este modelo aún se está traduciendo. Consulte los detalles en inglés o solicite información a nuestro equipo. English
SED-500WRO-H pharmaceutical water-treatment system: 0.5 T/h two-stage reverse osmosis (RO) skid. Includes raw-water tank + level controller + raw-water pump; multimedia pretreatment train (quartz-sand filter, granular ac
Plazo de entrega
Consultar
Capacidad de producción
Contáctenos
Funcionamiento
Raw water is pumped from the raw-water tank through a quartz-sand filter (suspended-solids removal), an activated-carbon filter (chlorine and organics removal), and a softener (Na⁺ ion-exchange to remove Ca/Mg hardness). Water then passes through a 5-μm precision cartridge filter and a 1st-stage high-pressure pump driving Stage-1 RO (3×4040 polyamide membranes in stainless-steel pressure vessels US4040-1). Stage-1 permeate feeds a 2nd-stage high-pressure pump and Stage-2 RO (2×4040 elements). Final permeate is collected in a 0.5 T sterile-water tank, polished by an in-line UV sterilizer, then distributed by a VFD-controlled supply pump. Automatic membrane-flush solenoid valves backwash on cycle.
Proceso de funcionamiento
1Raw water is pumped from the raw-water tank through a quartz-sand filter (suspended-solids removal), an activated-carbon filter (chlorine and organics removal), and a softener (Na⁺ ion-exchange to remove Ca/Mg hardness).
2Water then passes through a 5-μm precision cartridge filter and a 1st-stage high-pressure pump driving Stage-1 RO (3×4040 polyamide membranes in stainless-steel pressure vessels US4040-1).
3Stage-1 permeate feeds a 2nd-stage high-pressure pump and Stage-2 RO (2×4040 elements).
4Final permeate is collected in a 0.5 T sterile-water tank, polished by an in-line UV sterilizer, then distributed by a VFD-controlled supply pump.
5Automatic membrane-flush solenoid valves backwash on cycle.
Especificaciones técnicas
Especificaciones de la variante: SED-500WRO-H
Especificaciones
Modelo
SED-500WRO-H
Tensión
3-phase 4-wire (3-phase 380V + neutral)
Suministros
Raw water inlet ≥1 m³/h. Electrical: 3-phase 4-wire (3 phase + neutral). Drain within 10 m. Compressed air not required.
Detalles de conformidad
Designed for pharmaceutical purified-water service. All pretreatment vessels and main process piping in SS304. Fully automatic control with motor phase-loss/overload protection.
Dimensiones
Superficie de instalación
Skid-mounted system. Customer must provide: raw water source (≥1 m³/h flow); 3-phase 4-wire (3-phase + neutral) power supply; drain within 10 m of equipment.
Materiales
Materiales en contacto
SS304 (tanks; pressure vessels; piping; valves; precision-filter housing); polyamide (4040 RO membranes); brass (flush solenoid valves); ABS (distributors and end caps); UPVC (center tubes); PPF (cartridge filter elements)
Materiales del cuerpo
SS304 frame and vessels; powder-coated electrical cabinet
Características principales
Two-stage RO design — high rejection, low conductivity output
Pretreatment train: quartz sand + granular activated carbon + softener (each Φ300×1450 mm SS304 tank with auto-control valve, ABS distributors, UPVC center tube)
20-inch 5-element precision cartridge filter, quick-disconnect, with low-pressure gauge
Stage 1: 3×4040 polyamide RO membranes in SS pressure vessels (US4040-1)
Stage 2: 2×4040 polyamide RO membranes in SS pressure vessels (US4040-1)
Per-stage online conductivity meter, oil-filled vibration-resistant pressure gauges, acrylic flow meters, brass auto-flush solenoid valves
Sterile-water tank 0.5 T, in-line UV sterilizer, VFD-controlled supply pump
Fully automatic operation: motor phase-loss/overload protection, current overload alarm, auto membrane flush
Online ammeter and voltmeter on control panel
Two-stage RO meets pharma purified-water (PW) quality at competitive CapEx
Fully automatic — no operator required for normal running; only daily maintenance needed
Custom RO membranes available from SED
All pressure vessels and main piping in stainless steel
Aplicaciones
Pharmaceutical purified-water (PW) production
Process water for injectable, oral solid, or topical manufacturing
Laboratory and research-institute high-purity water
Sectores
Pharmaceutical (injectable, oral solid, topical)
Cosmetics / daily-chemical
Laboratory and R&D facilities
Marcas de componentes
Raw-water tank and pretreatment vessels: SS304 in-house (SED)
Level controller: Leida (radar type)
Pumps (raw-water, high-pressure, supply): Nan Pump (stainless-steel)
RO membranes: 4040 polyamide (SED custom)
Pressure vessels US4040-1: stainless steel
Pressure gauges: Yuyao Zhejiang (oil-filled vibration-resistant)
Flow meters: acrylic (rotameter)
Flush solenoid valves: Sanlixin / brass
Conductivity meters: Xianhe (online)
Quartz sand filler: Henan Gongyi (2–10 mm)
Activated carbon: Hebei Chengde (8–12 mesh, fruit-shell)
Softener resin: domestic 001×7
Pipe fittings and valves: Bozhong (SS304)
Electrical components: Delixi
SED
Hable con SED Sales Team
Especialistas en equipos · contacto por WhatsApp
Consulte el horario y la disponibilidad del equipo
Limpieza y mantenimiento
Automatic membrane-flush via solenoid valves on each RO stage. Manual daily maintenance required: cartridge filter element replacement as needed, tank inspection, log conductivity readings per stage.
Documentación
Ficha técnica (PDF)
Resumen del equipo, especificaciones y dimensiones · Documento original (inglés)
Solicitar al equipo comercial
Manual del operador
Instalación, funcionamiento y diagnóstico · Documento original (inglés)
Solicitar al equipo comercial
Ficha comparativa (Estándar y Económica)
Comparación de configuraciones · Documento original (inglés)
Solicitar al equipo comercial
Protocolos IQ / OQ / PQ
Documentación de validación para conformidad GMP · Documento original (inglés)
Solicitar al equipo comercial
Protocolos FAT / SAT
Pruebas de aceptación en fábrica y en sitio · Documento original (inglés)
Solicitar al equipo comercial
Planos CAD (STEP / IGES / DWG)
Planos de ingeniería para la instalación · Documento original (inglés)
Solicitar al equipo comercial
Certificados de calibración
Nivel sonoro, resistencia de tierra, rigidez dieléctrica y rugosidad · Documento original (inglés)
Solicitar al equipo comercial
DQ (cualificación del diseño)
Protocolo completo de cualificación del diseño · Documento original (inglés)
Solicitar al equipo comercial
Certificados de materiales
Composición del acero inoxidable 316L · Documento original (inglés)
Solicitar al equipo comercial