Accueil / Équipements / Convoyeur sous vide petit/moyen (classe 2-3 kW) / Vacuum Powder Feeder — Electrical Type (Auxiliary Equipment for Hard Capsule Filling Machine)

SED-3ZSJ-T

Sur devis

SED · SED-3ZSJ-T · 4 unités vendues

SED-3ZSJ-T — Electrical Type

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-3ZSJ-T vacuum powder feeder (electrical type). Whirlpool-pump-driven (3.0 kW, 380V 50Hz 3-phase) vacuum conveyor that lifts powder/granule material from drums or floor-level containers up to mixers, reactors, hoppers

Choisir une variante (1)

Délai de livraison

Sur devis

Cadence

900 kg/h

Fonctionnement

Whirlpool pump creates negative pressure in the Ø290 mm stainless-steel hopper. Material is sucked from the source through the stainless-steel suction nozzle and Ø51 mm PVC steel-wire hose into the hopper, where air/material separation occurs at the film-covered filter (Ø50 × 200 mm PE). After each feed cycle, a reversing valve switches to unloading: the pneumatic discharge door opens to drop material into the receiving equipment, then compressed-air back-blow cleans the filter. Level meter auto-starts when material falls below setpoint, auto-stops when above setpoint.

Processus de fonctionnement

1Whirlpool pump creates negative pressure in the Ø290 mm stainless-steel hopper.

2Material is sucked from the source through the stainless-steel suction nozzle and Ø51 mm PVC steel-wire hose into the hopper, where air/material separation occurs at the film-covered filter (Ø50 × 200 mm PE).

3After each feed cycle, a reversing valve switches to unloading: the pneumatic discharge door opens to drop material into the receiving equipment, then compressed-air back-blow cleans the filter.

4Level meter auto-starts when material falls below setpoint, auto-stops when above setpoint.

Caractéristiques techniques

Caractéristiques de la variante : SED-3ZSJ-T (3.0 kW electric vacuum feeder family)

Caractéristiques

Modèle

SED-3ZSJ-T

Cadence

900 kg/h

Tension

380V 50Hz 3 phases

Fluides et énergie

Electrical: 3-phase 380V 50Hz, 3.0 kW. Compressed air: ≥0.6 MPa supply pressure, ~25 L/min consumption (Ø6 mm pipe to filter valve inlet).

Détails de conformité

Designed to meet GMP requirements — sealed transfer reduces dust pollution and operator exposure. Use Three-Phase-Five-Wire power with separate working-neutral and protective-earth for safety and static elimination.

Puissance

3 kW

Pression d’air

0.6 MPa; consumption 25 L/min

Dimensions

Longueur

290 mm

Largeur

290 mm

Hauteur

850 mm

Poids

95 kg

Emprise au sol

Vertical canister Ø290 mm × 850 mm; mount on or above receiving equipment via flange or shelf; connect Ø6 mm compressed-air pipe to filter-valve inlet.

Matériaux

Matériaux en contact

SS304 stainless steel hopper (Ø290 mm); stainless steel suction nozzle; Ø51 mm PVC steel-wire flexible hose; Ø50 × 200 mm PE film-covered filter

Matériaux du bâti

Stainless steel hopper, frame, and suction nozzle; PVC steel-wire hose; PE filter housing

Composants

Filter Material

PE (Polyethylene)

Filter Size

Φ50×200 mm

Hose Material

PVC steel wire

Motor Type

Vortex blower

Fonctionnement

Consommation d’air

25 L/min

Caractéristiques physiques

Hopper Diameter

Φ290 mm

Hose Diameter

Φ51 mm

Caractéristiques principales

Whirlpool pump vacuum conveying — 3.0 kW, 380V 50Hz 3-phase

Capacity 900 kg/h (flour @ 4 m distance)

Ø290 mm × 850 mm SS304 stainless steel vacuum hopper, 95 kg

Ø50 × 200 mm PE film-covered filter

Compressed-air back-blow filter cleaning system (≥0.6 MPa, 25 L/min, Ø6 mm pipe)

Pneumatic discharge door + reversing valve

Level-meter automatic start/stop control

PCB control panel with adjustable feeding/unloading time

Ø51 mm PVC steel-wire flexible hose and stainless steel suction nozzle

Secondary filtration system

Eliminates manual pouring and dust pollution — GMP-compliant closed transfer

Automatic level-controlled start/stop reduces operator labor

Self-cleaning back-blow filter for sustained capacity over long runs

Versatile: feeds mixers, reactors, hoppers, tablet presses, packers, mills, vibrating screens, pelletizers

Three-phase five-wire wiring with separate working-neutral and protective-earth for static elimination

Applications

Powder and granule transfer to mixers, reactors, hoppers

Feeding tablet presses and capsule fillers

Feeding packing machines and vibrating screens

Feeding pelletizers and mills

Dust-free transfer in pharma, food, fine chemical workshops

Secteurs

Pharmaceutique

Health supplement / nutraceutical

Food

Fine chemical

Cosmétique

Marques des composants

Whirlpool (vortex) blower / motor — Φ290 mm hopper driven

PE film-covered filter Ø50 × 200 mm

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

After each batch or material change: (1) Open clip, remove hopper cover; (2) Remove filter — blow off powder with compressed air, then clean with warm water ≤80°C and a soft brush only (no hard brushes, which reduce filter accuracy); (3) Dry filters naturally or in oven ≤50°C until fully dry before reinstalling; (4) Open clips and rinse hopper with clean water; (5) Reassemble per assembly diagram.