SED-2000JNC-L
Sur devis
SED-2000JNC-L
SED · SED-2000JNC-L · En vedette
SED-2000JNC-L — Capsule/Tablet Checkweigher
La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English
SED-2000JNC-L Fully Automatic Single-Particle Capsule/Tablet Checkweigher (1-to-2 configuration: 1 control host + 2 execution units = 20 weighing channels). Design throughput 2,000 capsules/min (120,000 capsules/hour). W
Choisir une variante (2)
Délai de livraison
Sur devis
Cadence
120000 /
Fonctionnement
Operates on instantaneous static weighing. Material flow top-to-bottom under gravity: 1. Loading — manual or automatic feed (vacuum conveyor or bucket elevator option) to hopper; 2. Buffer storage — hopper with low-level alarm; 3. Capsule alignment — universal channel (similar to capsule-filling machine indexing, accommodating sizes 0#–4# without mold change); 4. Single-particle release — a spring pin holds the second-to-last capsule while the bottom opens, releasing one capsule at a time onto the weighing pan, then closes and resets; 5. Weighing — high-precision electromagnetic weighing sensor with AD conversion/amplification circuit and built-in F1-class standard weight for automatic calibration; 6. Sorting — PLC controls cylinders to route each capsule into one of three channels: acceptable, rejected, or unweighed (third channel). Control: PC + PLC; alarm modes: audible/visual.
Processus de fonctionnement
1Operates on instantaneous static weighing.
2Material flow top-to-bottom under gravity: 1.
3Loading — manual or automatic feed (vacuum conveyor or bucket elevator option) to hopper; 2.
4Buffer storage — hopper with low-level alarm; 3.
5Capsule alignment — universal channel (similar to capsule-filling machine indexing, accommodating sizes 0#–4# without mold change); 4.
6Single-particle release — a spring pin holds the second-to-last capsule while the bottom opens, releasing one capsule at a time onto the weighing pan, then closes and resets; 5.
7Weighing — high-precision electromagnetic weighing sensor with AD conversion/amplification circuit and built-in F1-class standard weight for automatic calibration; 6.
8Sorting — PLC controls cylinders to route each capsule into one of three channels: acceptable, rejected, or unweighed (third channel).
9Control: PC + PLC; alarm modes: audible/visual.
Caractéristiques techniques
Caractéristiques de la variante : SED-2000JNC-L (1-to-2: 1 host + 2 units
Caractéristiques
Modèle
SED-2000JNC-L
Cadence
120000 /
Tension
AC220V/50Hz
Fluides et énergie
Power: AC 220V/50Hz; rated power 0.6 kW (control host 0.3 kW; each execution unit 0.15 kW). Compressed air: >0.4 MPa via 8 mm OD air line; consumption <0.2 m³/min (<0.1 m³/min per unit). No water connection required.
Détails de conformité
Complies with US FDA, EU cGMP, GAMP5; 21 CFR Part 11: three-level password, password policy, electronic records and electronic signatures, audit trail; passes CSV (Computerized System Validation); participated in and passed US FDA on-site audit verification.
Puissance
0.6 kW
Pression d’air
>0.4Mpa
Dimensions
Longueur
790 mm
Largeur
350 mm
Hauteur
1480 mm
Poids
200 kg
Emprise au sol
Footprint 0.2 m²; machine dimensions 790×350×1,480 mm (L×W×H); with total hopper: 790×350×1,680 mm; discharge outlet height from floor: 700 mm.
Caractéristiques principales
1-to-2 configuration: 1 control host + 2 execution units, 20 channels total
Design throughput 120,000 capsules/hour (2,000 caps/min); each execution unit 60,000 caps/h
Weighing range 10–2,000 mg; resolution 0.1 mg; dynamic accuracy ≥±2.0 mg
Four selectable precision modes: ±2 mg (full speed), ±1.5 mg (high speed), ±1.0 mg (high precision), ±0.5 mg (ultra precision)
Modular structure: 1 host controls up to 1,024 execution units; easy capacity expansion
Compatible capsule sizes 000#–5# (0#/1#/2#/3#/4# share one mold set)
Quick-fit modular mold design — tool-free change in under 3 minutes
Three-channel sorting: acceptable / rejected / unweighed
Built-in F1-class standard weight for automatic calibration
IP65 dust protection on the working area
21 CFR Part 11 compliant: three-level password, electronic records/signatures, audit trail
Small footprint 0.2 m² (790×350×1,480 mm); PU casters for mobility
Control voltage DC 24V; compressed air >0.4 MPa, consumption <0.2 m³/min
Compact and lightweight with PU casters — moves freely between filling and tablet press rooms
Modular architecture: scale capacity anytime by adding execution units
Sizes 0#/1#/2#/3#/4# capsules share one mold — minimal changeover time
Near-zero consumables and spare parts; very low long-term maintenance cost
German-origin high-precision electromagnetic weighing sensors — same grade as BOSCH and Anritsu
20 years of field-proven stability; passed US FDA on-site audit verification
Full US FDA, EU cGMP, GAMP5, 21 CFR Part 11 compliance built-in
Applications
Single-particle capsule weight inspection
Single-particle tablet weight inspection
Automatic pass/fail sorting of capsules and tablets
Pharmaceutical batch prescription management
Secteurs
Fabrication pharmaceutique
Capsule filling
Tablet production
Marques des composants
High-precision weighing sensor
HALO
High-precision data acquisition controller
HALO
Capsule-sorting motor
ZHONGDA
Capsule-stop ejector pin
HALO
PLC
SIEMENS
Solenoid valve
SMC
Sorting cylinder
SMC
Calibration cylinder
SMC
Capsule-release cylinder
SMC
6mm precision linear bearing
NSK
6mm precision cam bearing
IKO
High-precision power supply
MW (Mean Well)
Air source processor combination
SMC
HMI touch-screen industrial PC
HALO (ODM)
Micro-needle printer
SPRT
Circuit breaker
SCHNEIDER
SED
Échangez avec SED Sales Team
Spécialistes des équipements · contact sur WhatsApp
Consultez les horaires et la disponibilité de l’équipe
Conformité
US FDA
EU cGMP
GAMP5
21 CFR Part 11
Documentation
Fiche technique (PDF)
Aperçu de l’équipement, caractéristiques et dimensions · Document d’origine (anglais)
Demander au service commercial
Manuel opérateur
Installation, fonctionnement et dépannage · Document d’origine (anglais)
Demander au service commercial
Fiche comparative (Standard et Économique)
Comparaison des configurations · Document d’origine (anglais)
Demander au service commercial
Protocoles IQ / OQ / PQ
Documentation de validation pour la conformité GMP · Document d’origine (anglais)
Demander au service commercial
Protocoles FAT / SAT
Essais de réception en usine et sur site · Document d’origine (anglais)
Demander au service commercial
Plans CAD (STEP / IGES / DWG)
Plans d’ingénierie pour l’implantation · Document d’origine (anglais)
Demander au service commercial
Certificats d’étalonnage
Niveau sonore, résistance de terre, rigidité diélectrique et rugosité · Document d’origine (anglais)
Demander au service commercial
DQ (qualification de la conception)
Protocole complet de qualification de la conception · Document d’origine (anglais)
Demander au service commercial
Certificats matières
Composition de l’acier inoxydable 316L · Document d’origine (anglais)
Demander au service commercial