Accueil / Équipements / Armoire de stérilisation ventilée / SED-2.0TFM-J Air-Over-Steam (Ventilated) Sterilizer

SED-2.0TFM-J

Sur devis

SED-2.0TFM-J

SED · SED-2.0TFM-J · En vedette

SED-2.0TFM-J — SED-2.0TFM-J Air-Over-Steam Sterilizer

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-2.0TFM-J Air-Over-Steam (Ventilated / Air-Steam Mixed-Pressure) Sterilizer with double-door pneumatic gas-seal interlock. Horizontal pass-through pressure-vessel sterilizer for moist-heat sterilization of liquids in

China GMPSteel pressure-vessel certification (X-ray inspection, labor ministry quality certificate)DQ / IQ / OQ documentation provided free of chargeGMP validation port reserved

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

Air-over-steam sterilization with forced recirculation. After load is placed on 304/316 SS sterilizing carts and double doors are closed (gas-seal interlock prevents door opening while pressurised), the cycle runs: preheat → sterilization (mixed clean steam + compressed air over-pressure, forced through one or more high-energy dual-speed blowers at 1.5 kW / <75 dB, circulating through the load for uniform temperature distribution ≤±2°C) → cooling and drying (cooling water fed into integral 304 SS cooling coils; condensed cold air flows through load to cool and evaporate surface moisture) → end. Optional hot-air drying stage for products with strict dryness requirements.

Processus de fonctionnement

1Air-over-steam sterilization with forced recirculation.

2After load is placed on 304/316 SS sterilizing carts and double doors are closed (gas-seal interlock prevents door opening while pressurised), the cycle runs: preheat → sterilization (mixed clean steam + compressed air over-pressure, forced through one or more high-energy dual-speed blowers at 1.5 kW / <75 dB, circulating through the load for uniform temperature distribution ≤±2°C) → cooling and drying (cooling water fed into integral 304 SS cooling coils; condensed cold air flows through load to cool and evaporate surface moisture) → end.

3Optional hot-air drying stage for products with strict dryness requirements.

Caractéristiques techniques

Caractéristiques de la variante : SED-2.0TFM-J

Caractéristiques

Modèle

SED-2.0TFM-J

Tension

AC 380V 50Hz, 3-phase 4-wire

Fluides et énergie

Power: 3-phase 4-wire AC 380V 50Hz, 4.5 kW/h; Boiler steam: 0.4–0.6 MPa, ~80 kg/cycle; Water: 0.1–0.3 MPa (also stated 0.2–0.3 MPa), ~120 kg/cycle; Pure water: 0.1–0.2 MPa; Compressed air: 0.5–0.7 MPa (also 0.5–0.8 MPa), ~2 m³/cycle

Puissance

4.5 kW

Pression d’air

Compressed air 0.5-0.7 MPa (also 0.5-0.8 MPa, 2 m3/cycle); steam 0.4-0.6 MPa (boiler steam, 80 kg/cycle); water 0.1-0.3 MPa (also 0.2-0.3 MPa, 120 kg/cycle); pure water 0.1-0.2 MPa

Dimensions

Longueur

2730 mm

Largeur

1480 mm

Hauteur

2000 mm

Poids

2200 kg

Emprise au sol

Overall 2730×1480×2000 mm (L×W×H)

Matériaux

Matériaux en contact

316L stainless steel (chamber, door, sterilizing tray); 304 stainless steel (sterilizing cart, transport cart, cooling coils, air ducts); medical silicone rubber (door gasket)

Matériaux du bâti

316L SS inner chamber 6 mm; Q345R steel jacket (X-ray inspected); 304 SS brushed-finish outer decorative panels

Caractéristiques principales

Air-over-steam mixed-pressure sterilization for plastic bottles and soft-bag liquid products

High-energy dual-speed forced-circulation blower (1.5 kW, <75 dB noise)

Integral 304 SS cooling coils for in-chamber cooling and surface drying without product transfer

Gas-sealed double-door motorised interlock with pressure safety interlock

Q345R steel jacket X-ray inspected with labor-ministry quality certificate

316L SS inner chamber (6 mm) with precision mechanical-polish internal surface (GMP, no dead angles)

Siemens S7 PLC + Siemens touch screen + micro-printer + recorder

Temperature uniformity ≤±2°C across chamber

Modular loading system: 316L SS sterilization trays, 304 SS carts and transport carts

Specifically designed for liquids in plastic / soft-bag containers where post-sterilization drying is essential

Thermal uniformity ≤±2°C across chamber via forced recirculation

Free GMP documentation: DQ / IQ / OQ files provided at no charge

Free commissioning and operator training by manufacturer

Comes with 2 × SS sterilizing carts, 2 × SS transport carts, and 1 set SS sterilizing trays

Applications

Sterilization of PE / PP plastic bottle liquids

Sterilization of PVC or composite plastic soft-bag liquids

Products requiring dry containers and packaging at end of cycle (inspection / labelling / packaging)

Secteurs

Pharmaceutical manufacturing (LVP and SVP liquid filling)

IV solutions manufacturing

Food / beverage liquid sterilization

Marques des composants

PLC (S7 series)

Siemens

Touch screen

Siemens

Micro printer (WH-E36)

Weihuan

Paper recorder

AIRIS (Airuisi)

Temperature probe (Pt100, A-grade, ≤0.15°C error)

AIRIS (Airuisi)

Mobile temperature probe (dual-core Pt100, A-grade)

B+B

Pressure transmitter (model 501)

HUBA

2-position 3-way solenoid valve (2V025-06)

AirTAC

Circulation blower (1.5 kW, <75 dB)

Xinhanyang Machinery

Angle-seat pneumatic valve (E290 series, self-regulating dual seal, 4M cycles)

ASCO

Steam trap (energy-saving, high reliability)

CIS

Water-ring vacuum pump (SK series, low noise, high vacuum)

Yulong

Pressure gauge (YTF-98ZK)

BLD (Brady)

Safety valve (A28-16P, 0.1–0.3 MPa)

Guangyi

Mechanical seal (water-cooled, good sealing)

Burgmann

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

China GMP

Steel pressure-vessel certification (X-ray inspection, labor ministry quality certificate)

DQ / IQ / OQ documentation provided free of charge

GMP validation port reserved